Made from styrene, a wrinkle-free plastic, this versatile backdrop can be used as a light table, prop setup or a seamless background. Props or people on the other side of the backdrop are seen as shapes and eerie silhouettes. Placed in front of a light, it delivers a frosted glass effect. You can cut Translum with scissors, so you can whittle down a roll into any shape you desire. It’s available in three grades: lightweight, for a soft light effect with a 3/4-stop light loss, medium grade that eliminates most of the shadows and delivers a 1.5-stop light loss and a heavy grade that knocks back two stops of light (this grade is recommended for shooting tables and is cleanable). Medium and lightweight grades are sold in 60-inch x 18-foot rolls while the heavyweight grade is available in 54-inch x 18-foot rolls.
The key to getting those gorgeous big bubbles of light in the background is to locate your subject a decent distance from the lights while at the same time positioning yourself as close to your subject as you can be to get the shot you want and setting the aperture on your camera just about as wide open as you can. The further away your subject is from the lights, the closer your are to your subject and the wider the aperture…..the bigger the lights.

Great backdrop! I had been looking for a hand painted backdrop but had found that most of them were far too expensive for my budget. Some of the more expensive backdrops also appeared to have far too many design and color variations for my needs. This backdrop is excellent quality and the color is perfect! The slight variations between dark and light gray look lovely in my images.
I needed a small kit that I would be ablt to take with me to anywhere i needed some extra lighting or a backdrop. This kit looked compact and had the essentials as well. I'm actually surprised at how much I've done using this kit, ive done amateur and commercial photography using this kit (mostly the lighting as supplemental). It works great for on the go projects and the case it all comes in is well made and easy to carry.

Made from styrene, a wrinkle-free plastic, this versatile backdrop can be used as a light table, prop setup or a seamless background. Props or people on the other side of the backdrop are seen as shapes and eerie silhouettes. Placed in front of a light, it delivers a frosted glass effect. You can cut Translum with scissors, so you can whittle down a roll into any shape you desire. It’s available in three grades: lightweight, for a soft light effect with a 3/4-stop light loss, medium grade that eliminates most of the shadows and delivers a 1.5-stop light loss and a heavy grade that knocks back two stops of light (this grade is recommended for shooting tables and is cleanable). Medium and lightweight grades are sold in 60-inch x 18-foot rolls while the heavyweight grade is available in 54-inch x 18-foot rolls.

You don’t have to browse Instagram long before you see images of people in dangerous places. You can satisfy the thrill-seeking selfie shooter with PhotoPie’s vertigo-inducing Bird’s Eye View floor mat. The bottom is made of non-slip rubber that will stay in place once it’s on the floor. The top material is felt and is imaged using a fade-resistant dye-sublimation process. Sizes range from 4 x 5 to 8 x 10 feet. 
This kind of fabric has an amazing quality that absorbs light from flashes around the studio. It enables you to have a pitch-black (if using black velour) portrait background that will not reflect the light from your flash or lighting equipment. This way, you don’t have to worry about the direction of light affecting the background because it leaves no detail.
The fill light for this shoot is also a Profoto D1 1,000W strobe in a Westcott Apollo Orb, which is camera right and with the light sitting about waist height. This light is also pulled back a bit further than the main to give a wider spill. Since I am using my lights to do two jobs, lighting the subject and the background, I am not gridding and instead placing them so that one edge of the modifier is pointing towards the edge of the seamless and the other is towards the subject.
I was a little thrown off that it came folded up in an envelop, as this lead to some significant "creasing". However, I just laid the material flat, rolled it up and hung it vertically so gravity would pull the creases out. After a couple of days of hanging, it is pretty much wrinkle free. I had been a little concerned about other reviewers' comments about the image quality (digital printing) on the actual backdrop, but mine is perfectly fine. Again, my only "negative" is that the backdrop appears to have a greater "floor depth" than what I currently have.
Buyer beware!! Fell apart after 1 use :( The plastic pieces separate from the poles. The adjustment valve on one side is completely stuck so I cannot adjust sizing. Seller dismissed my contact...I'd honestly just like to exchange for hopefully one that is not defective but seller in not responding. Very disappointed in this purchase. I buy from Amazon very often and this has been my first issue with low quality merchandise.
Backdrops and backgrounds have become indispensable to the photo booth and tradeshow experience as well as to so many other events. Does that mean you need one? Absolutely. And PB Backdrops has just the right one for you. With one of the largest selections anywhere, you can make your choice from pillow cover tension fabrics or single-sided tensions, all of which are custom printed  with hundreds of themes, or you can select from specific styles including rosette and mermaid.
A user mentions that he was surprised by the quality and that he hasn’t had issues with it. He shares that he bought several to shoot pictures for his website and that it takes a couple of minutes to set them up. Another purchaser states that he would have liked if there were sandbags to keep the frame stable, but it works well nonetheless. However, one customer has noted that the stand is flimsy and that the clips are not holding the fabric well.
What this tells us is that the further away the light source is from the subject and backdrop, the more likely we are to get an equal exposure from one to the other. The quality of the light source can also change with distance. You will notice that as the light gets further away it becomes a harder light with less transitional values. Also, if the subject appears to be further away from the backdrop in the last image, it's due to me needing to use a shorter focal length (zoom out) to avoid getting the softbox in the shot. The shorter focal length exaggerates perspective.
You are eligible for a full refund if no ShippingPass-eligible orders have been placed. You cannot receive a refund if you have placed a ShippingPass-eligible order. In this case, the Customer Care team will remove your account from auto-renewal to ensure you are not charged for an additional year and you can continue to use the subscription until the end of your subscription term.
×