I ordered this backdrop, because I've been recently getting into some basic photography and needed a backdrop in a standard, simple color. Please note that included with your purchase is ONLY the backdrop and clamps for it. The stand is sold separately. It came shipped to me in a smaller flat box. The backdrop itself was wrapped in a cellophane bag inside the box. The five spring clamps were in a smaller cellophane bag inside the box as well. The clamps were very good quality-they stayed closed without any slipping. The stitching and fabric quality looked very good, especially for the price. It's not thick enough to completely block out any light behind so be prepared to plan accordingly. It is not too thin either though in my opinion. The thinner material makes for easier storage. And yes it does have wrinkles when you unfold it, but that is easy ... full review
Among a raft of new products, Denny’s Fair Tale Trail puts your subject in a whimsical (dare we say Hobbit-esque) setting. The backdrop is available in your choice of three materials: Freedom Cloth, which is a wrinkle-free polyster that’s washable and dryer safe; Twist Flex, which uses the Freedom Cloth material but mounts it to a wire frame that can be folded down tight if you envision travelling a lot with the backdrop. Lastly, it’s available in canvas, which is a more delicate backdrop that ships with a wood mounting and Velcro straps. Sizes vary with Freedom Cloth, giving you the widest selection of size options.
Vinyl backdrops are thick, rolled and durable, and are recommended for professional studio work. They generally come in solids, but there are a few with printed patterns that can be very inexpensive. While most vinyl backgrounds have a glossy sheen, there are some (including a recently announced line by Savage, which includes the Savage Matte Finish Gray Infinity Series vinyl background) that have a matte finish to eliminate glare and reflections.

This was a great value for the price. The backdrops photograph well, the lights are great and the stand is good. The stand didn't come with instructions to put it together, but wasn't too difficult to figure out. The backdrops did come with some wrinkles from being folded for shipping, but I have them rolled up together on a wrapping paper roll and they seem to be much better (and I haven't even ironed them yet.) I would recommend this product, especially for beginners like myself.
The backdrop support system typically mounts backdrops that feature a pole pocket. This pocket simply slides onto the cross bars. Backdrops without a pole pocket can also be mounted to the backdrop support system with spring clamps. Spring clamps (AKA A-Clamps) can be found at any hardware store and typically only cost a few dollars. These clamps are great to have around your studio, as they also allow you to clamp backdrops taut at the bottom to eliminate wrinkles or shadows.
Any photo op is just as exciting as the party itself with our unique photo booth props. Stick props that include everything from emojis to silly monsters to zoo animals? Check. Costume accessories that you can wear and share like hats, masks and glasses? Yep, we got 'em. Novelty jewelry in every color and style? You better believe it! Set all of these fun finds out next to your DIY photo booth for guests to grab as the prepare to pose. Best of all, they double as take home party favors once the celebration wraps.
This is my first DIY project. I decided to make this backdrop stand so when I film my YouTube videos. I bought all of the products used from my local Home Depot. I bought three 10 feet long PCV pipes. 4 end caps, 4 T-caps and 2 Elbow Caps. I had a Home Depot Employee cut the PCV pipe for me in store. The 1st PCV was cut in TWO 54 inch long pieces. The 2nd PCV pipe was cut into FOUR 30 inch long pieces. The 3rd PCV pipe was cut into FOUR 12 inch long pieces. I got this idea from Pinterest and I found it very helpful. I spent $10.23 total, including tax, and it took me less than 10 minutes to construct this project. This is great for Vlogging, low-budget photography studios or even a photo-booth at an or birthday party!
Any photo op is just as exciting as the party itself with our unique photo booth props. Stick props that include everything from emojis to silly monsters to zoo animals? Check. Costume accessories that you can wear and share like hats, masks and glasses? Yep, we got 'em. Novelty jewelry in every color and style? You better believe it! Set all of these fun finds out next to your DIY photo booth for guests to grab as the prepare to pose. Best of all, they double as take home party favors once the celebration wraps.
Our full line of photo props and accessories will help you create the perfect portrait. From props that interact wonderfully with subjects to those that simply give your photos a little more interest. Our props are sure to help with creating magical photographs each and every time. Our realistic prop designs are often used in theatrical settings, special events, portraits, and even the motion picture industry.

Velour backgrounds are a relatively thick but lightweight material that is available in 40x5 to 8x12 inches. They give you the look of seamless without the hassle of getting crumpled up and ruined. Most are made of wrinkle-resistant fabric and can be reused again and again. Even though these backdrops are not available in a wide range of patterns and colors, they are perfect for those looking for low maintenance backdrops.
The folks at the slanted lens are anything but low value so it was kinda surprising to see that many of their setups are actually low-budget DIYs. The short below shows six of those tricks including a plumbing backdrop hanger, a ton of budgety lighting solutions (some of which we have covered in the past, but their softbox is pure budget geniusity) and my favorite, another use for a tarp.
This is the Meking background support system with a crossbar that telescopes from 77cm to 200cm. It can hold paper or cloth backgrounds to a maximum of almost 200cm.   Item features: Heavy duty 18mm,22mm and 25mm diameter tubes holds the heavy backdrop or drapes light background stand convenient for on-location work where portability is required The three legs spread out quickly and are freestanding Special locking system and the power clamp designed for stability and secure the backdrop usage   Item features: The lowest height of tripod: 77cm The highest height of tripod:200cm Crossbar length: 3 segments about 200cm Crossbar diameter:25mm.
If you’d like to do a little further reading,  here are a couple of links to tutorials that I found helpful before trying this myself. Prop Insanity has a great one with pictures of their actual studio set up using this type of background and Digitial Photography School has a great article on How to Take Beautiful Bokeh Christmas Images . (Bokeh being that gorgeous background blur we all love). You can also check out my Photography board on pinterest for more ideas.  If you do try this, I would LOVE to see your finished product so please come share with us on Facebook.
This is one of the best purchases I've made! I have a Talk Show and wanted good lighting and a place for my banner without spending hundreds of dollars. Well this was it! The stand where you hang your back drop, extends. It can go extremely wide or small enough to hang a small banner for an event. Same thing with the length. It can go as high as 6/7ft and as low as 2/3ft. Everything came new, nothing broke, everything worked. All four light stands can raise high or go low. For people using this for photography I strongly recommend getting some brighter light bulbs. This would be my only issue and recommendation. The bulbs are not bright enough at all. Its ok for the mean time or if you don't really need bright lights. It's amazing how this entire set up can be broken down quickly and all packed into a large, black, gym bag looking thingy that it comes in (of course inside the delivery box). I've had it for about a year and have taken it down atleast twice. My daughter and I put it back together when we moved in about 20 min or less. It comes with 4 light stands, 2 with umbrellas & 2 with the square light covers, 2 light covers, 1 backdrop stand, 3 sheets (black, green, white), 4 light bulbs, 3/4 clips for sheets & large black gym bag. Highly Recommend!
Having skills in a variety of lighting techniques for your photo backdrop can give you some wonderful options for creating beautiful imagery for either products or portraits. By brushing up on your exposure and composition know-how along with practicing prior to your actual shoot date you’ll quickly be able to build a portfolio showing off your creative depth.
You don’t have to browse Instagram long before you see images of people in dangerous places. You can satisfy the thrill-seeking selfie shooter with PhotoPie’s vertigo-inducing Bird’s Eye View floor mat. The bottom is made of non-slip rubber that will stay in place once it’s on the floor. The top material is felt and is imaged using a fade-resistant dye-sublimation process. Sizes range from 4 x 5 to 8 x 10 feet. 
To start constructing this DIY backdrop, measure how thick your elbow is compared to your curtain rod, and add electrical tape around the end of the rod until you have a tight fit. For most people, it will be easier to put a little bit of tape on at a time, testing the fit every so often until it’s snug, but measurements can give you a good base to start with. Don’t attach the rod to the elbow yet, however.
6× Photo Studio Light Photography Background Clips Backdrop Clamps Peg Package Contents: 6 clamps Description: These Set of 6 Universal Pro Clamps are easy to use and would be a great addition to your studio. These clamps are extremely useful in positioning or stretching your background onto backdrop support systems. Clamps are perfect when you need to attach any kind of fabric background to a support system. They work perfectly for Muslin, paper, and even canvas backdrops. These clamps are also known as spring clamps, A-clamps, and even studio tongs.
Buyer beware!! Fell apart after 1 use :( The plastic pieces separate from the poles. The adjustment valve on one side is completely stuck so I cannot adjust sizing. Seller dismissed my contact...I'd honestly just like to exchange for hopefully one that is not defective but seller in not responding. Very disappointed in this purchase. I buy from Amazon very often and this has been my first issue with low quality merchandise.

If you’d like to do a little further reading,  here are a couple of links to tutorials that I found helpful before trying this myself. Prop Insanity has a great one with pictures of their actual studio set up using this type of background and Digitial Photography School has a great article on How to Take Beautiful Bokeh Christmas Images . (Bokeh being that gorgeous background blur we all love). You can also check out my Photography board on pinterest for more ideas.  If you do try this, I would LOVE to see your finished product so please come share with us on Facebook.
Velour backgrounds are a relatively thick but lightweight material that is available in 40x5 to 8x12 inches. They give you the look of seamless without the hassle of getting crumpled up and ruined. Most are made of wrinkle-resistant fabric and can be reused again and again. Even though these backdrops are not available in a wide range of patterns and colors, they are perfect for those looking for low maintenance backdrops.

The backdrop support system typically mounts backdrops that feature a pole pocket. This pocket simply slides onto the cross bars. Backdrops without a pole pocket can also be mounted to the backdrop support system with spring clamps. Spring clamps (AKA A-Clamps) can be found at any hardware store and typically only cost a few dollars. These clamps are great to have around your studio, as they also allow you to clamp backdrops taut at the bottom to eliminate wrinkles or shadows.
Like other photo backdrop materials, polyester also comes in various sizes and colors. An advantage of this fabric is that it’s wrinkle-free. If there are heavy wrinkles, it can easily be removed by warm ironing from the back or by steam ironing it when it’s hung. It also includes rod holes that are perfect for hanging, especially if you don’t have a place to store it after using.
×