I just got this today and attached it to my back drop stand using A Clamps across the top. There are some crease marks where it was folded so I will try various tricks I found on the internet to get them out, hopefully, without melting or ruining it. I didn't give it 5 stars because it is a little small at 5'x7' for anything but a seated subject. That's not the sellers fault as it clearly states 5'x7' but I would definitely recommend it if it were 6'x9' or larger. Even with the folded creases, it works well out of the box.
When I want new portraits of my kids, I never head to the photography studio. Instead, I head to the kitchen or front room, where I get great window light. I’m willing to spend a lot more time than most photographers would with my kids to get just the photo I want, and I often photograph them right in front of a blank wall for an easy background. This can get old pretty quickly, though, so I’ve collected 20 different options for easy DIY backdrops you can use in your home.
I ordered this backdrop, because I've been recently getting into some basic photography and needed a backdrop in a standard, simple color. Please note that included with your purchase is ONLY the backdrop and clamps for it. The stand is sold separately. It came shipped to me in a smaller flat box. The backdrop itself was wrapped in a cellophane bag inside the box. The five spring clamps were in a smaller cellophane bag inside the box as well. The clamps were very good quality-they stayed closed without any slipping. The stitching and fabric quality looked very good, especially for the price. It's not thick enough to completely block out any light behind so be prepared to plan accordingly. It is not too thin either though in my opinion. The thinner material makes for easier storage. And yes it does have wrinkles when you unfold it, but that is easy ... full review

A user mentions that he was surprised by the quality and that he hasn’t had issues with it. He shares that he bought several to shoot pictures for his website and that it takes a couple of minutes to set them up. Another purchaser states that he would have liked if there were sandbags to keep the frame stable, but it works well nonetheless. However, one customer has noted that the stand is flimsy and that the clips are not holding the fabric well.

There's no hiding the fact that the LimoStudio 3-Piece Softbox Set is a bare-bones package. The only accessories included with this package are three stands, three softboxes, 12 bulbs, and a case. The boxes and stands are of a good size, and the stands are adjustable to different angles. In the end, however, brightness (and a budget price) are the features that make the LimoStudio a standout.
In the shot above I used a two light setup. The main light, camera left, is a Profoto D1 1,000Ws head inside of a 50 inch Westcott Apollo Softbox. While the idea of mixing what is considered to be a high-end strobe with a budget softbox my not sit right with some, I find the indirect lighting source from a Westcott or Photek to give a really nice and even light. The 60 inch Photek Softlighter, which I also enjoy using, may only cost $95 but gives a really nice, soft, and even light. If these lower cost indirect sources are good enough for the likes of Mario Testino and Annie Leibovitz, then they are good enough for me. Clay Cook did an great article on these lighting sources, "Lighting Like Leibovitz," that you can find here.
The fill light for this shoot is also a Profoto D1 1,000W strobe in a Westcott Apollo Orb, which is camera right and with the light sitting about waist height. This light is also pulled back a bit further than the main to give a wider spill. Since I am using my lights to do two jobs, lighting the subject and the background, I am not gridding and instead placing them so that one edge of the modifier is pointing towards the edge of the seamless and the other is towards the subject.
Important Disclaimer: The information contained on Top5Reviewed.com is intended for informational and educational purposes only. Any statements made on this website have not been evaluated by the FDA and any information or products discussed are not intended to diagnose, cure, treat or prevent any disease or illness. Please consult a healthcare practitioner before making changes to your diet or taking supplements that may interfere with medications.
As with lighting systems and camera equipment, backdrops require some kind of support to keep them in place. Background supports can be simple or sophisticated systems. The simple ones are easy to set up and break down and are well suited for location work, while sophisticated, permanent studio systems can hold multiple backgrounds that can be raised or lowered either manually or at the flip of a switch.

This is my first DIY project. I decided to make this backdrop stand so when I film my YouTube videos. I bought all of the products used from my local Home Depot. I bought three 10 feet long PCV pipes. 4 end caps, 4 T-caps and 2 Elbow Caps. I had a Home Depot Employee cut the PCV pipe for me in store. The 1st PCV was cut in TWO 54 inch long pieces. The 2nd PCV pipe was cut into FOUR 30 inch long pieces. The 3rd PCV pipe was cut into FOUR 12 inch long pieces. I got this idea from Pinterest and I found it very helpful. I spent $10.23 total, including tax, and it took me less than 10 minutes to construct this project. This is great for Vlogging, low-budget photography studios or even a photo-booth at an or birthday party!


The paper is awesome and thick and great for a photography backdrop. The problem I had with it was no statement letting me know that you cannot use it on a regular stand or the paper will unwind uncontrollably and end up in a crinkled mess on the floor. Half of my roll spun out onto the floor as soon as I tried pulling a little bit out to do a session. Thankfully I was preparing for the session about 15 minutes before the appointment time and I was able to wind it up, cut off the creased parts and rig up something with some painters tape to temporarily keep it in place. Because of this I was unable to change out my backdrop during the session without risk of it unraveling again with my clients here at my place. In order to use this ... full review

As with lighting systems and camera equipment, backdrops require some kind of support to keep them in place. Background supports can be simple or sophisticated systems. The simple ones are easy to set up and break down and are well suited for location work, while sophisticated, permanent studio systems can hold multiple backgrounds that can be raised or lowered either manually or at the flip of a switch.
A good beginner, entry-level, infrequent use backdrop. If you take the time to remove the wrinkles, and there are quite a few due to shipping restrictions, it turns out to be a good first backdrop. I rolled it tightly on a 1” pvc, leaving it that way for several days, and hung it afterwards. There were a few places I needed to use a hair dryer to get them out but once done it’s a nice backdrop. It’s lightweight being vinyl but the printing on it looks much richer. For the price you know you will need to do some work but in the end it’s well worth it.
Get an austere rustic look with Background Town’s Wall Yellow. It’s available in two materials. NewFab is a tear resistant “paper-like” substrate that’s wrinkle resistant and won’t reflect light. It’s sold in 3.9 x 5-foot and 5 x 6.8-foot sizes. NewFab backdrops won’t come with rod pockets and aren’t machine washable. If you need a backdrop with those attributes, spring for Background Town’s UltraCloth material, a machine-washable backdrop that’s wrinkle-free and has rod pockets sewn in. It’s sold in sizes ranging from 6 x 8 to 8 x 12 feet.
One of the main questions are customers ask us is “what is the difference between continuous and strobe lighting?” Continuous lighting uses a constant light source to light your subject, meaning that your lights will stay on during the entirety of your photo shoot. Continuous lighting is recommended for beginners. Strobe lighting uses a flash of light at the moment your camera shutter opens to illuminate your subject. Many professionals use this type of lighting because it offers more control of the light.

Shooting on a clean white backdrop can be one of the more complex in-studio lighting setups around. Properly exposing for full lengths while giving your models room to work can require four or more extra lights and considerable amount of setup time. While taking the time to take care of the details is important for getting the perfect image and saving yourself hours of retouching on the back end, sometimes you just want to get a nice clean background without the hours of prep.
It was higher quality then I had expected . One side is a very soft and silky/shiny material. The photo is only on one side , just to let you know . Needs to be ironed but ours broke and we do not have an iron at the moment. If the lines were out it would look absolutely gorgeous. Totally changed the feel of a room. Bought the 60”W by 80”L . Not disappointed.
So why only 4 stars and not 5? I personally don't like the very top of the backdrop. If you look at the pictures carefully (I don't know if you can actually see this because I tried to crop these out), it looks like there are ceiling lights on a dark alley street. Scientifically, that's impossible and realistically, it looks WEIRD. But other than that, it's near perfect for what you're paying for.

This is my first DIY project. I decided to make this backdrop stand so when I film my YouTube videos. I bought all of the products used from my local Home Depot. I bought three 10 feet long PCV pipes. 4 end caps, 4 T-caps and 2 Elbow Caps. I had a Home Depot Employee cut the PCV pipe for me in store. The 1st PCV was cut in TWO 54 inch long pieces. The 2nd PCV pipe was cut into FOUR 30 inch long pieces. The 3rd PCV pipe was cut into FOUR 12 inch long pieces. I got this idea from Pinterest and I found it very helpful. I spent $10.23 total, including tax, and it took me less than 10 minutes to construct this project. This is great for Vlogging, low-budget photography studios or even a photo-booth at an or birthday party!
Summer may be drawing to a close soon, but ice cream is everyone’s year-round fave. Unlike the real stuff, Ink & Elm’s Dip n Dots backdrop won’t melt on you and its matte vinyl is tear resistant, so you can use it as a floor drop, too. It’s water resistant in case some real ice cream spills from your subject’s hands (or yours, we’re not judging). You can order the backdrop with grommets along the top for an extra $8, or spend $15 to get a pole pocket along the top. Sizes range from 3 x 2 feet up to 10 x 6 feet. Yum.

No more wasting your money on cheap vinyl. We've got just what you're looking for in a professional fabric photo backdrop. We print on high quality, matte finish, non-glare cloth with a dye sublimation process that exceeds expectations. We even have three different fabrics to choose from, allowing for further individualization! Other companies either print on subpar materials (like vinyl, muslin, or even paper!) or they print direct to fabric, which lessens the resolution and leaves you wanting more. Here at Photo Pie, we pride ourselves on providing excellent customer service through your entire ordering process. Whether you're needing a one time backdrop for a party or needing durable, wrinkle free backdrops for your photography studio, we've got professionally sublimated backdrops just for you!
×