This was my first order with this product and I like it. The only thing that threw me off is that I expected it to be as pictured. Brick all as the 9x6 and the extra white on the bottom. It is in fact 9x6. I have included a couple test shots. The product works as expected. I love white back grounds. I think that this adds just a little bit of texture to them. Also important to not be right up against the backdrop. make sure that you get some distant between the subject and the back drop.

This is my first DIY project. I decided to make this backdrop stand so when I film my YouTube videos. I bought all of the products used from my local Home Depot. I bought three 10 feet long PCV pipes. 4 end caps, 4 T-caps and 2 Elbow Caps. I had a Home Depot Employee cut the PCV pipe for me in store. The 1st PCV was cut in TWO 54 inch long pieces. The 2nd PCV pipe was cut into FOUR 30 inch long pieces. The 3rd PCV pipe was cut into FOUR 12 inch long pieces. I got this idea from Pinterest and I found it very helpful. I spent $10.23 total, including tax, and it took me less than 10 minutes to construct this project. This is great for Vlogging, low-budget photography studios or even a photo-booth at an or birthday party!
The seller describes this as “seamless”.... not even close! This is the CHEAPEST photo backdrop I’ve ever bought. It was folded in packaging in a way that there were folds every 8 x 10 inches- completely unusable. I tried to steam out the wrinkles (because this in no way is fabric- I didn’t want to risk putting it in the dryer). The steaming was unsuccessful. I tried putting it in the dryer for a minute or 2 and the wrinkles were all still there but the ink was not!
When I received this it was folded down to 1'x6" package. After unfolding it, every fold line is very visible. Also the interior lights on top are part of the drop. This is an old time type of backdrop that depicts like a French street in late 1800 to early 1900 why there is a interior ceiling with lights on the top of this backdrop is in my opinion stupid. Also the seams should have been glued in a downward overlay application. Instead they are in a upward application which makes the top of the seam fold down exposing the white backside of the drop. Avoid. And by something that is actually cloth and not vinyl.

For our session I tried to keep Mr. C about 3/4 of the way up from the lights on the wall and towards me (right around where you are seeing the garland and red ornaments in the above photo).  I was sitting only as far back from him as I had to, to get what I wanted of him in the frame (keeping in mind the three criteria above).  Using the garland and ornaments for props helped because he just played with them wherever I set them down.
This was my first order with this product and I like it. The only thing that threw me off is that I expected it to be as pictured. Brick all as the 9x6 and the extra white on the bottom. It is in fact 9x6. I have included a couple test shots. The product works as expected. I love white back grounds. I think that this adds just a little bit of texture to them. Also important to not be right up against the backdrop. make sure that you get some distant between the subject and the back drop.
AMAZING!!! I was worried about what the quality of this backdrop would be because of the price. The colors are BRIGHT and don't look faded in the picture!! It comes folded very small. I suggest hanging it asap. A little work with a steamer got the creases out with not much effort. It has small faded spots from the creases but i cant see them in the picture. I was worried the color would be lighter than the people in the picture but that is not the case. Great buy :)
In the shot above I used a two light setup. The main light, camera left, is a Profoto D1 1,000Ws head inside of a 50 inch Westcott Apollo Softbox. While the idea of mixing what is considered to be a high-end strobe with a budget softbox my not sit right with some, I find the indirect lighting source from a Westcott or Photek to give a really nice and even light. The 60 inch Photek Softlighter, which I also enjoy using, may only cost $95 but gives a really nice, soft, and even light. If these lower cost indirect sources are good enough for the likes of Mario Testino and Annie Leibovitz, then they are good enough for me. Clay Cook did an great article on these lighting sources, "Lighting Like Leibovitz," that you can find here.
To see if ShippingPass is right for you, try a 30-day free trial. Also, with ShippingPass, there is no need to worry about commitment. If you decide you want to discontinue the service, you can cancel your subscription at any time. No matter what your shipping needs, Walmart's got you covered. Sign up for ShippingPass so you can shop more, save money and live better.
×