This is my first DIY project. I decided to make this backdrop stand so when I film my YouTube videos. I bought all of the products used from my local Home Depot. I bought three 10 feet long PCV pipes. 4 end caps, 4 T-caps and 2 Elbow Caps. I had a Home Depot Employee cut the PCV pipe for me in store. The 1st PCV was cut in TWO 54 inch long pieces. The 2nd PCV pipe was cut into FOUR 30 inch long pieces. The 3rd PCV pipe was cut into FOUR 12 inch long pieces. I got this idea from Pinterest and I found it very helpful. I spent $10.23 total, including tax, and it took me less than 10 minutes to construct this project. This is great for Vlogging, low-budget photography studios or even a photo-booth at an or birthday party!

Another buyer mentions that it’s easy to adjust the portable backdrop stand and that it’s perfect for light-weight backdrops. He highly recommends it as one of the best background stands available. However, a couple of users have noted that the product is flimsy and breaks because the plastic is of poor quality. Some also complain that they received a damaged unit.
In the shot above I used a two light setup. The main light, camera left, is a Profoto D1 1,000Ws head inside of a 50 inch Westcott Apollo Softbox. While the idea of mixing what is considered to be a high-end strobe with a budget softbox my not sit right with some, I find the indirect lighting source from a Westcott or Photek to give a really nice and even light. The 60 inch Photek Softlighter, which I also enjoy using, may only cost $95 but gives a really nice, soft, and even light. If these lower cost indirect sources are good enough for the likes of Mario Testino and Annie Leibovitz, then they are good enough for me. Clay Cook did an great article on these lighting sources, "Lighting Like Leibovitz," that you can find here.
A purchaser comments that the adjustable backdrop stand is sturdy enough to do the job and that it’s easy to put it together. He adds that it’s light and easy to transport and that he highly recommends it to anyone looking for portable background stands. Another reviewer shares that he bought three adjustable support frames and that he is pleased with the construction and the stability.
Want to tweak one of our images? Have your own custom image you'd like to print? The possibilities are endless and our customer service department is ready to help. We print using forced perspective to help give you the most realistic image possible so that your portraits will look realistic as if you were actually on location. If you have an image that you own or have rights to, we'll help you get it formatted correctly for our printing process. Email us your artwork to start the process. If you're wanting a custom Hollywood style photo backdrop with your logo(s) repeated all over it, we do that too with one of our step and repeat backdrops!
×