In this SOOC shot, you can see just how down and dirty this setup was. The backdrop is not pulled out very far and taped down only in a couple of spots. In the top left edge of the image you can see the corner of the 50 inch Apollo. This also shows that the right edge of the light is hitting the subject, allowing for a soft feathered look, but more importantly for this setup, it's allowing the rest of the box to light our background.
I am helping a friend’s daughter with her wedding planning and want to make a backdrop like this for the wedding ceremony. Can you elaborate on how the strings of lights were plugged in and whether they all “hung” versus the string light hanging down and then looping back up, if that makes sense? I like the look of them just hanging but it seems like plugging a bunch of individual ones would be hard. Am I making this too complicated?!
Position these lights to point at the backdrop and use manual settings to achieve the “blown out highlights” effect. Make sure the light reading is at least 3 stops higher than the light on your subject. Light bounced off the blown-out background will also create a back-lighting effect on your subject, the degree of back-lighting depends on the angle at which background light are pointed at the background.
Chromakey gives you the ability to insert your photography client into a background of your choosing by having them pose in front of a vibrantly colored screen. You can do this in post-processing programs by removing and replacing the chromakeyed color with the background of your choosing. While you can technically chromakey any color, opting for a very exaggerated color, neon green or blue, will reduce the chance of your client accidentally looking like a floating head without a body because you chromakeyed the color of their dress.
Easy to assemble with a whole lot of party magic, our design-a-room sets take the term scene setters to another level. You can turn any space into an immersive party environment with our unique selection. Create unforgettable photo ops and completely transform your party space or venue with these disposable party backdrops. Host a safari with the jungle journey design-a-room background. A carnival backdrop banner kit puts the big tent right in your living room. Mardi Gras street scenes let you bring New Orleans to your guests, no matter where you actually live. The best part? These kits feature cutouts to put over the backdrops for a layered look.
Cheryl Woods is an accomplished photographer, designer and branding consultant with a career spanning 20+ years. Her photographic work includes editorial, fashion, portraiture and product photography for major companies in the consumer products field including QVC and Hanover Direct. She received a B.F.A. in Photography from the University of the Arts and an M.F.A. in Media Design from Full Sail University. Cheryl's work has been exhibited at the Lowes Museum of Art in Coral Gables, FL, The New York Independent Film Festival and the Rosenwald Wolf Gallery in Philadelphia, PA. Check out her website here!
This project is simple and doesn’t take very long at all, maybe about an hour from start to finish. After you’re finished, you will want to roll up the fabric and lights for storage until the wedding. Consider covering it as well, to keep and dirt or dust from settling on it. We covered ours with garbage bags since black dog fur and white curtains are not exactly friends.
Once I got the equipment out of the box, the entire kit took about 20-30 minutes to set up and break down. I'm expecting it'll be quicker once I've gotten used to it, but the kit's otherwise simple enough to handle. The backdrops are rather thin, but enough for my current needs. I'll need to be more aware of what's behind the muslin, and the sheets can be easily replaced by thicker material when necessary. The metal supports on the umbrellas are enough to keep the things open, but aren't very tolerant of, say, a klutz who knocks the stand over while setting up. (Nothing's broken, and everything's still useful, but... yeah, that bend wasn't there in the umbrella before.) The bag is sturdy enough for lugging things around, but it isn't padded - I've been using the muslins for that purpose. I'm keeping all the equipment boxes and plastic baggies to make sure things stay tidy, but if you wanted to, you could cut it down to just the containers for the light bulbs. Overall, pretty chuffed with this kit.
Features: 1.5-In-1 Design: Fill-in light ring, Bluetooth shutter, Selfie Stick, Phone Holder, Tripod Lamp 2.Wide Application: Widely applied to podcast, live video, video chat, selfie fill light, makeup, filling light indoors, portrait, fashion, wedding art, advertisement photography, etc.3.With Controller: Brightness up and down(10-level brightness), light color switching and power on/off easily handled through the controller 4.3-Light Color: Warm Light, Soft Light, White light. Different light color delivers differetn shooting results. 5.Eye Protection Light Source: Soft light photography light with stepless dimming, can be adjusted to your desired level. 6.Designed to Last: High quality led bead equipepd, flicker-free, no light ra.
Material:Thin Vinyl plastic cloth(not washable). Features: Light absorbant Non-reflective.No pocket Type: Computer-printed for realism. For: different sizes for wedding, audlt, children, holiday party etc. Vinyl cloth backdrops is our latest and greatest computer painted wrinkle-free fleece-like fabric. This lightweight fabric will give you the intense vivid color that you have been looking for in a backdrop.
The Little Studio System is a must-have backdrop solution for photographing newborns, infants, toddlers, pets, and products.  The Little Studio is essentially a 3.5 x 3.5 x 3.5-foot room in a box. This system is completely collapsible and can be paired with hundreds of available backdrops and floordrops. These backdrops attach to the system with Velcro, allowing for instant set changes and clean up.
I am helping a friend’s daughter with her wedding planning and want to make a backdrop like this for the wedding ceremony. Can you elaborate on how the strings of lights were plugged in and whether they all “hung” versus the string light hanging down and then looping back up, if that makes sense? I like the look of them just hanging but it seems like plugging a bunch of individual ones would be hard. Am I making this too complicated?!

6× Photo Studio Light Photography Background Clips Backdrop Clamps Peg Package Contents: 6 clamps Description: These Set of 6 Universal Pro Clamps are easy to use and would be a great addition to your studio. These clamps are extremely useful in positioning or stretching your background onto backdrop support systems. Clamps are perfect when you need to attach any kind of fabric background to a support system. They work perfectly for Muslin, paper, and even canvas backdrops. These clamps are also known as spring clamps, A-clamps, and even studio tongs.
Features: 1.5-In-1 Design: Fill-in light ring, Bluetooth shutter, Selfie Stick, Phone Holder, Tripod Lamp 2.Wide Application: Widely applied to podcast, live video, video chat, selfie fill light, makeup, filling light indoors, portrait, fashion, wedding art, advertisement photography, etc.3.With Controller: Brightness up and down(10-level brightness), light color switching and power on/off easily handled through the controller 4.3-Light Color: Warm Light, Soft Light, White light. Different light color delivers differetn shooting results. 5.Eye Protection Light Source: Soft light photography light with stepless dimming, can be adjusted to your desired level. 6.Designed to Last: High quality led bead equipepd, flicker-free, no light ra.
ALL backdrops/floordrops found in our "NEW Design Arrivals" section are *ON SALE* for 30% off now through Sunday night. Shop here: http://www.backdropsandfloors.com/NEW-Design-Arrivals_c_221.html Enter coupon code: "newarrival" at checkout ----------------------------------------------------------- Sale rules can be found in the shopping cart before checkout.
Anyone that does any kind of handy work around the house (or anywhere for that matter) definitely needs to keep a few of these on hand. They are simple. They are plastic, but they feel very strong. The spring inside is REALLY strong! It's got a tight grip for sure! I have around 40-50 of these (different brands) that I've acquired over the years doing woodworking projects. These rank right up there with the best ones! If you're gluing something, these are a must to clamp the parts together. Great grip and as inexpensive as you're going to find! (currently $9.99/1.67ea). Hard to argue with that!
These lights worked perfectly for what I purchased them for - as part of the backdrop for my Christmas pictures. They are a great, long length and width and shine brightly, but they are not overpowering. I had no issues stringing them up at all. They have a steady on mode as well as several different blinking modes. My only complaint is that the plug did not fit into my standard outlet - it was very loose and kept sliding out, so I had to tape it in to use it. Also, there is no off switch, so these have to be unplugged when not in use. Like I said, though, they worked great for my intended purpose.
If you're looking for photography backdrops suitable for outdoor or portable use, collapsible backgrounds are both economical and space-efficient choices. Many fold down to a third of their size, and come with convenient carrying bags so you have room to pack and protect multiple backgrounds. Several styles feature reversible designs, to give clients a choice of colors and patterns. Pastel pink and blue backgrounds work well for baby showers. Urban-inspired prints let kids and teens show off their more expressive side. You'll also find options in camera-ready, chroma-key colors suitable for special effects projects.
×