You can channel our cavemen ancestry with Custom Photo Prop’s Faux Fur Mat, safe in the knowledge that no animals were harmed in their making. These synthetic mats are PETA-approved, machine-washable and hypoallergenic. They can be ordered as a basket stuffer in a 20 x 32-inch size. It’s sold as a 15 x 15-inch layer or in 3 x 5-foot and 5 x 6-foot sizes. They’re super comfortable on baby’s skin as well.
Backdrops tend to be at the center of your event, whether it's a photo booth backdrop, standard photography, or a tradeshow booth. They bring life, charm, and enjoyment to your subjects. With a photo booth in particular, your customers get to play. So...they're necessary. With over 500 hundred to choose from (and the option to custom-design your own), PB Backdrops has you covered.
Easy to use and looks good in portraits. I used a stand by Fancierstudio and clips by LimoStudio and got this backdrop set up nicely. It's plenty long, and looks like you could cut it up and use it to cover a larger area, however I wish it were wider. It's just barely wide enough for a good portrait, but not any wider. It looks good if you put your subject a foot or so in front of it with a large aperture and get some bokeh on it.

A. Regardless of the lighting system you’ve selected, you should have at least some control over the light intensity. A basic lighting system should allow you to adjust the power of the lighting to half or full. More complex systems will give you several settings options to control the intensity of the lighting. If you purchase an inexpensive lighting system, you’ll have to spend more time adjusting the physical position of the light to achieve the exact intensity of light on the subject you want.
The package arrived in a Manila folder therefore had lot of creases. I follow the instructions and ironed it and as you can see in the photos the creases diminished greatly. My husband made a 2x4 frame for it with wood already available as we do no have a photographer stand. It came out lovely. I can’t wait for the final result as the date arrives. Well worth the money! Not the greatest quality of material but it’s also not bad for what’s intended for.
A user also mentions that the frame feels slightly flimsy, but he hasn’t had any problems with it. He adds that he is satisfied with its performance so far and that the carrying bag is a nice bonus. However, one customer complains that the product’s measurements are not correct and that it’s not strong enough to hold the vinyl in place without dipping.
The backdrop support system typically mounts backdrops that feature a pole pocket. This pocket simply slides onto the cross bars. Backdrops without a pole pocket can also be mounted to the backdrop support system with spring clamps. Spring clamps (AKA A-Clamps) can be found at any hardware store and typically only cost a few dollars. These clamps are great to have around your studio, as they also allow you to clamp backdrops taut at the bottom to eliminate wrinkles or shadows.
Express your love of geology with ProStudio’s Hard Rock Poser. They may look back-breaking, but these posers are made from plastic and are hollow inside so you can move them around your studio, or to a location, with ease. (Pro tip: Pretend they’re real and lift one over your head to impress friends and clients.) The poser has a flat top and is sturdy enough for an adult to sit on. The small rock measures in at 19 x 14 x 12 inches while a large model is 27 x 21 x 25 inches. Additional sizes and rock colors are also available.
Made from styrene, a wrinkle-free plastic, this versatile backdrop can be used as a light table, prop setup or a seamless background. Props or people on the other side of the backdrop are seen as shapes and eerie silhouettes. Placed in front of a light, it delivers a frosted glass effect. You can cut Translum with scissors, so you can whittle down a roll into any shape you desire. It’s available in three grades: lightweight, for a soft light effect with a 3/4-stop light loss, medium grade that eliminates most of the shadows and delivers a 1.5-stop light loss and a heavy grade that knocks back two stops of light (this grade is recommended for shooting tables and is cleanable). Medium and lightweight grades are sold in 60-inch x 18-foot rolls while the heavyweight grade is available in 54-inch x 18-foot rolls.

When it comes to special effect backgrounds, the chroma key backdrops are the most common used in tandem with special effects. The chroma key or key backgrounds are usually set to perfect blue or green helping a computer differentiate the background from the subject easily. This background can be used to superimpose a second image over the first one to show the chroma key color section.
This is my first DIY project. I decided to make this backdrop stand so when I film my YouTube videos. I bought all of the products used from my local Home Depot. I bought three 10 feet long PCV pipes. 4 end caps, 4 T-caps and 2 Elbow Caps. I had a Home Depot Employee cut the PCV pipe for me in store. The 1st PCV was cut in TWO 54 inch long pieces. The 2nd PCV pipe was cut into FOUR 30 inch long pieces. The 3rd PCV pipe was cut into FOUR 12 inch long pieces. I got this idea from Pinterest and I found it very helpful. I spent $10.23 total, including tax, and it took me less than 10 minutes to construct this project. This is great for Vlogging, low-budget photography studios or even a photo-booth at an or birthday party!
We had so much fun on Christmas with this backdrop and the accessories. We had an ugly Christmas sweater dinner and we took so many photos using this. It was like an ongoing photo session. The back drop is very sturdy and was put up for the next holiday season. I used a hot glue gun to attach the sticks to the props rather than using the tape strips that were included.

I love this backdrop for photos; I used it for my daughters pictures to use on her first birthday card. However, as other reviewers stated, getting the creases out is nearly impossible. I took another persons idea of wrapping it around a pole (one of those long, skinny paint rollers meant for painting ceilings - so very skinny). I wrapped it around the pole and used tape to hold it in place for TWO WEEKS. While it helped with the creases a little bit, they were still pretty visible. I would love to purchase more of these for future use but am hesitant; I wish the supplier would ship them rolled in tubes as opposed to folding them.
I've purchased a few backdrops with this company (LB) now, and though I **HATE** the sizing of their backdrops (way too short and not wide enough), the quality of them are so good for the price. This one is versatile in my opinion: we used it for a murder mystery party that took place in ancient China (oh yeah!), but I've seen pictures of people using this as a studio backup for couple pictures and so forth. I think it's a fun one that deserves to be purchased more often.
This is my first DIY project. I decided to make this backdrop stand so when I film my YouTube videos. I bought all of the products used from my local Home Depot. I bought three 10 feet long PCV pipes. 4 end caps, 4 T-caps and 2 Elbow Caps. I had a Home Depot Employee cut the PCV pipe for me in store. The 1st PCV was cut in TWO 54 inch long pieces. The 2nd PCV pipe was cut into FOUR 30 inch long pieces. The 3rd PCV pipe was cut into FOUR 12 inch long pieces. I got this idea from Pinterest and I found it very helpful. I spent $10.23 total, including tax, and it took me less than 10 minutes to construct this project. This is great for Vlogging, low-budget photography studios or even a photo-booth at an or birthday party!
To see if ShippingPass is right for you, try a 30-day free trial. Also, with ShippingPass, there is no need to worry about commitment. If you decide you want to discontinue the service, you can cancel your subscription at any time. No matter what your shipping needs, Walmart's got you covered. Sign up for ShippingPass so you can shop more, save money and live better.
×