Users love the price and the quality of the product, but some do note that it’s too light for their liking. The Linco T-shaped backdrop stand features a sturdy design, a set of crossbars, and clamps to keep the fabric in place. Another great thing about this product is that it’s light – just four lbs., and you don’t need any special skills to assemble it. What’s more, you can adjust it from 2.6 ft. to 6.7 ft. 


Yes all the "bad" stuff they say about this product is true, it's essentially a very long roll of wrapping paper, thin, wrinkles easily. BUT that being said, if you treat it with just a little TLC this stuff performs beautifully. Photographs extremely well. Perfect for the beginner photographer on a limited budget, or like myself a more seasoned photographer with a small studio, I highly recommend this product. For the price it can't be beat! This photo was taken on the "barn wood" version.

I would definitely play around with it. Your not going to want to go too wide with 4 because odds are they will move around a bit and you’ll end up with some soft faces. Some key things to remember would be try to keep their faces all on the same plane of focus, that will allow you to shoot a little wider. Generally with 4 kids I would aim to shoot around f/4 but certainly play around. At that aperture you may want to consider moving them further away from the background. Keep in mind the closer you are to them and the further away from the background they are the more bokeh you will get!


The backdrop support system typically mounts backdrops that feature a pole pocket. This pocket simply slides onto the cross bars. Backdrops without a pole pocket can also be mounted to the backdrop support system with spring clamps. Spring clamps (AKA A-Clamps) can be found at any hardware store and typically only cost a few dollars. These clamps are great to have around your studio, as they also allow you to clamp backdrops taut at the bottom to eliminate wrinkles or shadows.
We had so much fun on Christmas with this backdrop and the accessories. We had an ugly Christmas sweater dinner and we took so many photos using this. It was like an ongoing photo session. The back drop is very sturdy and was put up for the next holiday season. I used a hot glue gun to attach the sticks to the props rather than using the tape strips that were included.
This is my first DIY project. I decided to make this backdrop stand so when I film my YouTube videos. I bought all of the products used from my local Home Depot. I bought three 10 feet long PCV pipes. 4 end caps, 4 T-caps and 2 Elbow Caps. I had a Home Depot Employee cut the PCV pipe for me in store. The 1st PCV was cut in TWO 54 inch long pieces. The 2nd PCV pipe was cut into FOUR 30 inch long pieces. The 3rd PCV pipe was cut into FOUR 12 inch long pieces. I got this idea from Pinterest and I found it very helpful. I spent $10.23 total, including tax, and it took me less than 10 minutes to construct this project. This is great for Vlogging, low-budget photography studios or even a photo-booth at an or birthday party!
A user mentions that he was surprised by the quality and that he hasn’t had issues with it. He shares that he bought several to shoot pictures for his website and that it takes a couple of minutes to set them up. Another purchaser states that he would have liked if there were sandbags to keep the frame stable, but it works well nonetheless. However, one customer has noted that the stand is flimsy and that the clips are not holding the fabric well.

This is the Meking background support system with a crossbar that telescopes from 77cm to 200cm. It can hold paper or cloth backgrounds to a maximum of almost 200cm.   Item features: Heavy duty 18mm,22mm and 25mm diameter tubes holds the heavy backdrop or drapes light background stand convenient for on-location work where portability is required The three legs spread out quickly and are freestanding Special locking system and the power clamp designed for stability and secure the backdrop usage   Item features: The lowest height of tripod: 77cm The highest height of tripod:200cm Crossbar length: 3 segments about 200cm Crossbar diameter:25mm.


There are a few things to consider when choosing a backdrop size, including the size of your studio and the size of your subject. Portrait subjects should typically be pulled at least 3’ away from your backdrop to prevent shadows and allow for easy lighting. Of course, this distance your subject will be from the backdrop will be altered when taking overhead or backlit/high key shots. Below, we’ll discuss both the length and width restrictions of common backdrops.
One of the advantages of using a chroma key background is that it can shorten production time by doing away with the need to change from one background to another. This kind of photo backdrop allows the photographer to freely take pictures without thinking of what background will best fit the image, as they can decide on that part later in the post-processing stage.
This kind of fabric has an amazing quality that absorbs light from flashes around the studio. It enables you to have a pitch-black (if using black velour) portrait background that will not reflect the light from your flash or lighting equipment. This way, you don’t have to worry about the direction of light affecting the background because it leaves no detail.
I just got this today and attached it to my back drop stand using A Clamps across the top. There are some crease marks where it was folded so I will try various tricks I found on the internet to get them out, hopefully, without melting or ruining it. I didn't give it 5 stars because it is a little small at 5'x7' for anything but a seated subject. That's not the sellers fault as it clearly states 5'x7' but I would definitely recommend it if it were 6'x9' or larger. Even with the folded creases, it works well out of the box.
While many photographers are experts at their craft and able to utilize natural lighting and landscapes as backgrounds for their portraits, studios that provide a controlled environment are a necessity for many photographers. A key component to any photography studio is your background material as the right background materials can make or break a photo session. To ensure you achieve the overall theme and feel of your photography style, here's a look at what you might consider when choosing affordable background materials offered on eBay .
Think of the Pearl photo booth as magic on a stand. Capture the smiles, capture the joy, turn it into top quality photos with customizable messages and graphics, then send these off into the world - all in a flash. Ideal for weddings, corporate functions, birthday parties, proms . . . you get the picture. The Pearl sets up in minutes, creates joy and memories for hours.
Features: 1.5-In-1 Design: Fill-in light ring, Bluetooth shutter, Selfie Stick, Phone Holder, Tripod Lamp 2.Wide Application: Widely applied to podcast, live video, video chat, selfie fill light, makeup, filling light indoors, portrait, fashion, wedding art, advertisement photography, etc.3.With Controller: Brightness up and down(10-level brightness), light color switching and power on/off easily handled through the controller 4.3-Light Color: Warm Light, Soft Light, White light. Different light color delivers differetn shooting results. 5.Eye Protection Light Source: Soft light photography light with stepless dimming, can be adjusted to your desired level. 6.Designed to Last: High quality led bead equipepd, flicker-free, no light ra.
It was higher quality then I had expected . One side is a very soft and silky/shiny material. The photo is only on one side , just to let you know . Needs to be ironed but ours broke and we do not have an iron at the moment. If the lines were out it would look absolutely gorgeous. Totally changed the feel of a room. Bought the 60”W by 80”L . Not disappointed.
The backdrop support system typically mounts backdrops that feature a pole pocket. This pocket simply slides onto the cross bars. Backdrops without a pole pocket can also be mounted to the backdrop support system with spring clamps. Spring clamps (AKA A-Clamps) can be found at any hardware store and typically only cost a few dollars. These clamps are great to have around your studio, as they also allow you to clamp backdrops taut at the bottom to eliminate wrinkles or shadows.

Made of moderately thick, heavy material, canvas used to be the most popular among photography backdrops. However, due to its bulk and cost, it has been overshadowed by muslin backdrops in terms of popularity. Nevertheless, a good canvas backdrop will last a long time and provide a classy look to your shots. While you can bring canvas photo backdrops with you, they’re best suited for studio work since they easily wrinkle when stored in a duffel bag.
×