This project is simple and doesn’t take very long at all, maybe about an hour from start to finish. After you’re finished, you will want to roll up the fabric and lights for storage until the wedding. Consider covering it as well, to keep and dirt or dust from settling on it. We covered ours with garbage bags since black dog fur and white curtains are not exactly friends.
You don’t have to browse Instagram long before you see images of people in dangerous places. You can satisfy the thrill-seeking selfie shooter with PhotoPie’s vertigo-inducing Bird’s Eye View floor mat. The bottom is made of non-slip rubber that will stay in place once it’s on the floor. The top material is felt and is imaged using a fade-resistant dye-sublimation process. Sizes range from 4 x 5 to 8 x 10 feet. 
Nice strong clamp. Seems well made for an inexpensive gadget. Very handy addition to the things you can mount a camera to when either you don't have a tripod or the tripod just won't work. I have not tried it with the SLR but should hold well unless the camera is quite large or with a long heavy lens. Probably best with P&S or the smaller SLR & lenses.
I just got this today and attached it to my back drop stand using A Clamps across the top. There are some crease marks where it was folded so I will try various tricks I found on the internet to get them out, hopefully, without melting or ruining it. I didn't give it 5 stars because it is a little small at 5'x7' for anything but a seated subject. That's not the sellers fault as it clearly states 5'x7' but I would definitely recommend it if it were 6'x9' or larger. Even with the folded creases, it works well out of the box.
Once I got the equipment out of the box, the entire kit took about 20-30 minutes to set up and break down. I'm expecting it'll be quicker once I've gotten used to it, but the kit's otherwise simple enough to handle. The backdrops are rather thin, but enough for my current needs. I'll need to be more aware of what's behind the muslin, and the sheets can be easily replaced by thicker material when necessary. The metal supports on the umbrellas are enough to keep the things open, but aren't very tolerant of, say, a klutz who knocks the stand over while setting up. (Nothing's broken, and everything's still useful, but... yeah, that bend wasn't there in the umbrella before.) The bag is sturdy enough for lugging things around, but it isn't padded - I've been using the muslins for that purpose. I'm keeping all the equipment boxes and plastic baggies to make sure things stay tidy, but if you wanted to, you could cut it down to just the containers for the light bulbs. Overall, pretty chuffed with this kit.
The fill light for this shoot is also a Profoto D1 1,000W strobe in a Westcott Apollo Orb, which is camera right and with the light sitting about waist height. This light is also pulled back a bit further than the main to give a wider spill. Since I am using my lights to do two jobs, lighting the subject and the background, I am not gridding and instead placing them so that one edge of the modifier is pointing towards the edge of the seamless and the other is towards the subject.
Photography Studio Green Screen Video Photo Quick Softbox Lighting Light Kit, 600 Watt Output, EZ1624GREENSCREENKIT Photo Studio Premium Reflector Umbrella Continuous 500 Watt Lighting kit, Background Support, and Muslin Background, NEWCB_BWG_FL-08 KIT Photo Studio Continous Lighting kit, Background Support, and Black & White Backgrounds, NEWCB_BW_26KIT 600 Watt Photo Studio Continous Lighting kit, Background Support, and Muslin Background, NEWCB_BWG_600WKIT
Our full line of photo props and accessories will help you create the perfect portrait. From props that interact wonderfully with subjects to those that simply give your photos a little more interest. Our props are sure to help with creating magical photographs each and every time. Our realistic prop designs are often used in theatrical settings, special events, portraits, and even the motion picture industry.
Nice strong clamp. Seems well made for an inexpensive gadget. Very handy addition to the things you can mount a camera to when either you don't have a tripod or the tripod just won't work. I have not tried it with the SLR but should hold well unless the camera is quite large or with a long heavy lens. Probably best with P&S or the smaller SLR & lenses.
Our full line of photo props and accessories will help you create the perfect portrait. From props that interact wonderfully with subjects to those that simply give your photos a little more interest. Our props are sure to help with creating magical photographs each and every time. Our realistic prop designs are often used in theatrical settings, special events, portraits, and even the motion picture industry.
For gear, I used my Canon 50mm 1.4 lens. My camera settings for most of the shots you saw were f1.8,  ISO 640 and shutter speed around 250. No flash. Just natural light. You really just need to play around with it a bit depending on your lighting situation and what not.  Be brave and use that manual mode on your camera or at least the aperture priority setting. I did test shots using stuffed toys while the little guy was napping so as not to “waste” any precious time with him and risk missing any good shots. If you have older kids that will sit still you can get some really cool shots! If only Mr. C was old enough for an M&M bribe. Mr Moose did well though…. Here’s a test shot…..
I needed a small kit that I would be ablt to take with me to anywhere i needed some extra lighting or a backdrop. This kit looked compact and had the essentials as well. I'm actually surprised at how much I've done using this kit, ive done amateur and commercial photography using this kit (mostly the lighting as supplemental). It works great for on the go projects and the case it all comes in is well made and easy to carry.
The picture posted here is definitely deceiving, but overall I am happy with the product. I don't know how the photographer edited and/or modified the print in the listing to have the "depth" of the floor like that. I have two pictures that I will submit to show what I received - these are UN-EDITED photos (not run through Photoshop, only added my name to the bottom). I ended up using a floor cloth, as you can clearly see in the image. If the photographer used a separate floor cloth to achieve the extended "brick" look, I could understand it, but as the photo stands it is very deceiving. Obviously there were some adjustments made to bring out the colors in the background too. I can easily achieve the same "rich" colors in Photoshop or some other similar photo editing program.
I just got this today and attached it to my back drop stand using A Clamps across the top. There are some crease marks where it was folded so I will try various tricks I found on the internet to get them out, hopefully, without melting or ruining it. I didn't give it 5 stars because it is a little small at 5'x7' for anything but a seated subject. That's not the sellers fault as it clearly states 5'x7' but I would definitely recommend it if it were 6'x9' or larger. Even with the folded creases, it works well out of the box.

This is my first DIY project. I decided to make this backdrop stand so when I film my YouTube videos. I bought all of the products used from my local Home Depot. I bought three 10 feet long PCV pipes. 4 end caps, 4 T-caps and 2 Elbow Caps. I had a Home Depot Employee cut the PCV pipe for me in store. The 1st PCV was cut in TWO 54 inch long pieces. The 2nd PCV pipe was cut into FOUR 30 inch long pieces. The 3rd PCV pipe was cut into FOUR 12 inch long pieces. I got this idea from Pinterest and I found it very helpful. I spent $10.23 total, including tax, and it took me less than 10 minutes to construct this project. This is great for Vlogging, low-budget photography studios or even a photo-booth at an or birthday party!
The idea is to hang this backdrop so that some of the floor print is actually hanging up off the floor and this works very well. The full-length photo shows this way of hanging the backdrop. However, it also works very well if you just hang the backdrop so that the brick is straight up and the floor print is on the floor. The creases from the item being folded are not avoidable, but I did not do a thing to try to remove them and, as you can see, they did not cause any problems in these photos. I am very careful to fold the backdrop when I'm done with it on exactly the same creases so as not cause any further creases or wrinkles. It's easy to do, but a large floor area is very helpful when folding. The smaller sized one might be a better option if you shooting only single subjects. I bought the LimoStudio backdrop frame LimoStudio Photo Video Studio Adjustable Muslin Background Backdrop Support System Stand & Cross Bar, AGG1111and the two together are awesome. I truly love this product!
Anyone that does any kind of handy work around the house (or anywhere for that matter) definitely needs to keep a few of these on hand. They are simple. They are plastic, but they feel very strong. The spring inside is REALLY strong! It's got a tight grip for sure! I have around 40-50 of these (different brands) that I've acquired over the years doing woodworking projects. These rank right up there with the best ones! If you're gluing something, these are a must to clamp the parts together. Great grip and as inexpensive as you're going to find! (currently $9.99/1.67ea). Hard to argue with that!
This is exactly what I needed to help my small photography business get off the ground even more! Great product! Very strong stands, and yes, as other reviewers stated, the backdrops are muslin and are very thin, just hang all three or a thicker material behind it and it's fine! I took some really nice Valentines Photographs of my children to test it out! I'm a very happy photographer right now! I did see a few complain about the light fixtures breaking on them, I think the case might be that they are over tighting the bulbs, don't, and you should be fine! I also read a few complain about everything not fitting back into the bag, I did not have this problem, everything fit back in just great! A very happy customer here!! I've attached some of the photographs I took using the black background.

The most simple way to hang a backdrop is by using wall hooks. This solution is suitable for people using smaller and lighter backdrops. 5 x 7-foot X-Drop Backdrops and 3.5 x 3.5-foot backdrops feature built-in grommets for use with hooks. While you can install these into your wall, we recommend picking up a pack of removable wall hooks to protect your walls. They are usually under $10 USD per pack.
Material:Thin Vinyl plastic cloth(not washable). Features: Light absorbant Non-reflective.No pocket Type: Computer-printed for realism. For: different sizes for wedding, audlt, children, holiday party etc. Vinyl cloth backdrops is our latest and greatest computer painted wrinkle-free fleece-like fabric. This lightweight fabric will give you the intense vivid color that you have been looking for in a backdrop. 

Our full line of photo props and accessories will help you create the perfect portrait. From props that interact wonderfully with subjects to those that simply give your photos a little more interest. Our props are sure to help with creating magical photographs each and every time. Our realistic prop designs are often used in theatrical settings, special events, portraits, and even the motion picture industry.
Any photo op is just as exciting as the party itself with our unique photo booth props. Stick props that include everything from emojis to silly monsters to zoo animals? Check. Costume accessories that you can wear and share like hats, masks and glasses? Yep, we got 'em. Novelty jewelry in every color and style? You better believe it! Set all of these fun finds out next to your DIY photo booth for guests to grab as the prepare to pose. Best of all, they double as take home party favors once the celebration wraps.

Our full line of photo props and accessories will help you create the perfect portrait. From props that interact wonderfully with subjects to those that simply give your photos a little more interest. Our props are sure to help with creating magical photographs each and every time. Our realistic prop designs are often used in theatrical settings, special events, portraits, and even the motion picture industry.

A. Many photographers choose a continuous lighting set as a introductory set because of its low starting price. Additionally, continuous lighting allows you to control shadows, and to take the time to figure out the exact camera settings to use. However, continuous light generates heat, so if you’re shooting portrait photos, your subjects could grow uncomfortable.

The most simple way to hang a backdrop is by using wall hooks. This solution is suitable for people using smaller and lighter backdrops. 5 x 7-foot X-Drop Backdrops and 3.5 x 3.5-foot backdrops feature built-in grommets for use with hooks. While you can install these into your wall, we recommend picking up a pack of removable wall hooks to protect your walls. They are usually under $10 USD per pack.
Shooting on a clean white backdrop can be one of the more complex in-studio lighting setups around. Properly exposing for full lengths while giving your models room to work can require four or more extra lights and considerable amount of setup time. While taking the time to take care of the details is important for getting the perfect image and saving yourself hours of retouching on the back end, sometimes you just want to get a nice clean background without the hours of prep.
A 5 or 6-foot wide backdrop is a great size for headshots and ¾-length portraits. These backdrops are easy to manage and still only requires minimal space to set up. These backgrounds are ideal for event photographers who often work in busy spaces or for photographers working in a small home studio. While 5 to 6-foot backdrops offer more flexibility than 3.5-foot backdrops, they still become a bit tight if when photographing a couple or full-length portrait.
×