On 3...2...1...say cheese! If you're looking for smile-worthy photo booth picks but don't want to spend a ton of cheddar, then you've come to the right place. With this superb selection, you can stock your photo booth with a variety of props, decorations, photo backdrops, hats, accessories and so much more. All this in one convenient place? That's reason enough to smile big!
A. Regardless of the lighting system you’ve selected, you should have at least some control over the light intensity. A basic lighting system should allow you to adjust the power of the lighting to half or full. More complex systems will give you several settings options to control the intensity of the lighting. If you purchase an inexpensive lighting system, you’ll have to spend more time adjusting the physical position of the light to achieve the exact intensity of light on the subject you want.

This project is simple and doesn’t take very long at all, maybe about an hour from start to finish. After you’re finished, you will want to roll up the fabric and lights for storage until the wedding. Consider covering it as well, to keep and dirt or dust from settling on it. We covered ours with garbage bags since black dog fur and white curtains are not exactly friends.


I would definitely play around with it. Your not going to want to go too wide with 4 because odds are they will move around a bit and you’ll end up with some soft faces. Some key things to remember would be try to keep their faces all on the same plane of focus, that will allow you to shoot a little wider. Generally with 4 kids I would aim to shoot around f/4 but certainly play around. At that aperture you may want to consider moving them further away from the background. Keep in mind the closer you are to them and the further away from the background they are the more bokeh you will get!
The fill light for this shoot is also a Profoto D1 1,000W strobe in a Westcott Apollo Orb, which is camera right and with the light sitting about waist height. This light is also pulled back a bit further than the main to give a wider spill. Since I am using my lights to do two jobs, lighting the subject and the background, I am not gridding and instead placing them so that one edge of the modifier is pointing towards the edge of the seamless and the other is towards the subject.
The folks at the slanted lens are anything but low value so it was kinda surprising to see that many of their setups are actually low-budget DIYs. The short below shows six of those tricks including a plumbing backdrop hanger, a ton of budgety lighting solutions (some of which we have covered in the past, but their softbox is pure budget geniusity) and my favorite, another use for a tarp.
Want to tweak one of our images? Have your own custom image you'd like to print? The possibilities are endless and our customer service department is ready to help. We print using forced perspective to help give you the most realistic image possible so that your portraits will look realistic as if you were actually on location. If you have an image that you own or have rights to, we'll help you get it formatted correctly for our printing process. Email us your artwork to start the process. If you're wanting a custom Hollywood style photo backdrop with your logo(s) repeated all over it, we do that too with one of our step and repeat backdrops!
×