They are plastic, but very strong and the clamping power is quite good. The only annoyance is the little red pads on the end, swivel all the way around so if you are trying to attach something up high with one hand, sometimes they flip backwards and don't grab correctly. You just need to make sure they are facing inwards before you reach up high. I used all 6 clamps to attach a large king size sheet to a linco backdrop stand and it was enough - ... full review

The latest addition to our lineup, these are serious solutions for serious exhibitors who need much more powerful and attention-grabbing setups than backdrops or backgrounds: a single system and they will create the perfect walk-in booth for your expo or promotional event. They assemble swiftly, they're lightweight, durable, highly portable, and you can add vivid custom graphics.
This is my first DIY project. I decided to make this backdrop stand so when I film my YouTube videos. I bought all of the products used from my local Home Depot. I bought three 10 feet long PCV pipes. 4 end caps, 4 T-caps and 2 Elbow Caps. I had a Home Depot Employee cut the PCV pipe for me in store. The 1st PCV was cut in TWO 54 inch long pieces. The 2nd PCV pipe was cut into FOUR 30 inch long pieces. The 3rd PCV pipe was cut into FOUR 12 inch long pieces. I got this idea from Pinterest and I found it very helpful. I spent $10.23 total, including tax, and it took me less than 10 minutes to construct this project. This is great for Vlogging, low-budget photography studios or even a photo-booth at an or birthday party!
In summary, the key factors to getting the backdrop and subject lit in a similar exposure zone is distance; The distance of the subject to the background and the distance of the light source to the subject. Decrease the distance of the subject to background and increase the distance of the main light to the subject to make this easier. The key factor for getting a soft and directional quality to the light is also distance, but it's the opposite. By getting the light closer to the subject, we can create a softer light with more directional qualities. Also remember that these qualities of the light are relative to the size of the light source. If you are using a smaller light source, you will need to get it in closer to hold those transitional values. If you are using a larger light source, you may be able to get your light further back and still hold those soft-light qualities. Also, if the examples and basic principles here make sense to you, you have kind of just learned the inverse square law!
Alright so at first I was kinda debating on whether or not to get it because of all of the mixed reviews but I'm glad I got it because it's perfect for what I needed. I'm a free lance illustrator and besides working at home, I go to conventiontions quite frequently and I needed something that would help the whole set up process go by faster and opted for this and honestly, I'm glad I did.
For a dramatic or edgy appearance, go with low-key lighting. Low-key lighting also focuses attention onto your subject by surrounding them in shadows instead of light. To do this, you want to ensure that your solid black backdrop is at least 3 stops darker than the light on your subject. With low-key lighting, you also need to ensure that none of the light from your subject is hitting your backdrop. Grids and flag are very helpful for this.
well my fault i didnt pay attention to other posted reviews that said order multiples. i only ordered one and of course it was no where near enough to do a proper back drop. so i will need to buy maybe 2 more. the picture seems a tad misleading cos it looks like just one solid panel. One Panel is the equivalent of one of my House curtains. which is where i hung this up, over my windows, to make a back drop for our New years eve family party. LOL it was real conversation piece.
This is my first DIY project. I decided to make this backdrop stand so when I film my YouTube videos. I bought all of the products used from my local Home Depot. I bought three 10 feet long PCV pipes. 4 end caps, 4 T-caps and 2 Elbow Caps. I had a Home Depot Employee cut the PCV pipe for me in store. The 1st PCV was cut in TWO 54 inch long pieces. The 2nd PCV pipe was cut into FOUR 30 inch long pieces. The 3rd PCV pipe was cut into FOUR 12 inch long pieces. I got this idea from Pinterest and I found it very helpful. I spent $10.23 total, including tax, and it took me less than 10 minutes to construct this project. This is great for Vlogging, low-budget photography studios or even a photo-booth at an or birthday party!

One of the advantages of using a chroma key background is that it can shorten production time by doing away with the need to change from one background to another. This kind of photo backdrop allows the photographer to freely take pictures without thinking of what background will best fit the image, as they can decide on that part later in the post-processing stage.

Arrived damaged with small holes from the folds but I thought I could work with it. It is not wide enough for full frame, edged in white and printed so poorly that the design looks like it has a flaw. Look carefully at the seller's images. Several are photoshopped to appear better than the product. The last shot the seller uses shows a huge printing flaw. From a design standpoint, this makes no sense whatsoever to blow out that area with white. It isn't simulated light to give depth, it's just a flaw from the printer. Really, really bad photoshop to begin with in the first place, with other areas showing white artifacts on the design. China quality and standards. Not recommended unless you can shoot around them or photoshop them out later.

Vinyl backdrops are thick, rolled and durable, and are recommended for professional studio work. They generally come in solids, but there are a few with printed patterns that can be very inexpensive. While most vinyl backgrounds have a glossy sheen, there are some (including a recently announced line by Savage, which includes the Savage Matte Finish Gray Infinity Series vinyl background) that have a matte finish to eliminate glare and reflections.

The backdrops used for photography are usually made of lighter material which makes it easy for the photographers to carry them around while traveling. The backdrops are usually hung as panels or can be easily draped over anything to give a particular effect. They can also be suspended from background stands by using clamps. Depending upon the type of effect needed by the photographer, the type and size of backdrop can be selected from the wide variety available. Since backdrops require some support, there are many types of background supports available that are well-suited for location work, or even sophisticated permanent studios.

An additional piece to go in the kitchen! with some matching dish towels and foam dish drying mats,everything was pulled together nicely. The window in the kitchen is as big as the curtains here and when the sunlight shines in at the end of the day it looks like you are strolling through this valley, very beautiful. Wouldn't recommend this unless you have a very large window so the panels can open all the way so you can see the entire picture.


We had so much fun on Christmas with this backdrop and the accessories. We had an ugly Christmas sweater dinner and we took so many photos using this. It was like an ongoing photo session. The back drop is very sturdy and was put up for the next holiday season. I used a hot glue gun to attach the sticks to the props rather than using the tape strips that were included.
Browse our collection of photography props including posing stools, steps for seated and standing shots, numbers, and more. These photography props are also ideal for theatre productions, catalog shoots, school portraits and more. With multiple options available, you are sure to find the photography props you need at the low prices you want. Interested in learning more about photography props? Check out What Posing Props Can Do For Your Photo Shoot!
The Julius Studio background curtain set features an aluminum alloy construction to ensure durability and portability, and photo clams made of synthetic nylon to provide a strong grip and prevent the canvas from slipping out. Another great thing is that it’s adjustable in width (5-10.3 ft) and height (2.6 -7.5 ft). In addition to this, the set includes quality sandbags for stability.
Users love the portable carrying bag, but some do note that it’s not heavy-duty or suitable for heavy fabrics. The ePhoto support stand kit is made of lightweight aluminum for portability, and you can adjust the height up to 8 ft. and the width to 10 ft. Another great thing about this product is that you can set it up in minutes, store it in the included carry bag and take it with you.
Planning a luau or surf party? Transport your party guests to a tropical paradise with our ocean-themed scene setters. Choose a beach backdrop for a luau prom or a shipwrecked party or pick out a water backdrop or surfboard banner. However you choose to set up your photo booth space, make sure you check out our assortment of photo stick props and other photo booth props to help make your snapshots one of a kind. We have a variety of themes with supporting props, so shop around for movie nights, western parties and even weddings! We also offer personalized backdrops that make it look like you're posing for a mug shot!
×