Arrived damaged with small holes from the folds but I thought I could work with it. It is not wide enough for full frame, edged in white and printed so poorly that the design looks like it has a flaw. Look carefully at the seller's images. Several are photoshopped to appear better than the product. The last shot the seller uses shows a huge printing flaw. From a design standpoint, this makes no sense whatsoever to blow out that area with white. It isn't simulated light to give depth, it's just a flaw from the printer. Really, really bad photoshop to begin with in the first place, with other areas showing white artifacts on the design. China quality and standards. Not recommended unless you can shoot around them or photoshop them out later.
The backdrop support system typically mounts backdrops that feature a pole pocket. This pocket simply slides onto the cross bars. Backdrops without a pole pocket can also be mounted to the backdrop support system with spring clamps. Spring clamps (AKA A-Clamps) can be found at any hardware store and typically only cost a few dollars. These clamps are great to have around your studio, as they also allow you to clamp backdrops taut at the bottom to eliminate wrinkles or shadows.
Important Disclaimer: The information contained on Top5Reviewed.com is intended for informational and educational purposes only. Any statements made on this website have not been evaluated by the FDA and any information or products discussed are not intended to diagnose, cure, treat or prevent any disease or illness. Please consult a healthcare practitioner before making changes to your diet or taking supplements that may interfere with medications.
As with lighting systems and camera equipment, backdrops require some kind of support to keep them in place. Background supports can be simple or sophisticated systems. The simple ones are easy to set up and break down and are well suited for location work, while sophisticated, permanent studio systems can hold multiple backgrounds that can be raised or lowered either manually or at the flip of a switch.

They are plastic, but very strong and the clamping power is quite good. The only annoyance is the little red pads on the end, swivel all the way around so if you are trying to attach something up high with one hand, sometimes they flip backwards and don't grab correctly. You just need to make sure they are facing inwards before you reach up high. I used all 6 clamps to attach a large king size sheet to a linco backdrop stand and it was enough - ... full review

We used this backdrop for an at-home photo shoot with a newborn. It worked great for us, the only downside is that it is folded when it comes and came with instructions to get the creases out adding some more work than just opening the package and taking pictures. Regardless, it flattened perfectly fine in about 10 minutes and we’ll be using it again so it was definitely worth it for the price and effort.
The type of material that you choose for photo backdrops can impact the photos that you take in several ways. Materials such as cotton, muslin, or canvas, may absorb and soften your studio lighting whereas materials such as vinyl, polyester, and velvet may reflect some of your studio lighting in your photos. Different situations will call for different photo material options, so it's a good idea to have a range of colors and prints in different material types. Many of these materials are available in this eBay category. Other photo background materials may include:
The picture posted here is definitely deceiving, but overall I am happy with the product. I don't know how the photographer edited and/or modified the print in the listing to have the "depth" of the floor like that. I have two pictures that I will submit to show what I received - these are UN-EDITED photos (not run through Photoshop, only added my name to the bottom). I ended up using a floor cloth, as you can clearly see in the image. If the photographer used a separate floor cloth to achieve the extended "brick" look, I could understand it, but as the photo stands it is very deceiving. Obviously there were some adjustments made to bring out the colors in the background too. I can easily achieve the same "rich" colors in Photoshop or some other similar photo editing program.
In summary, the key factors to getting the backdrop and subject lit in a similar exposure zone is distance; The distance of the subject to the background and the distance of the light source to the subject. Decrease the distance of the subject to background and increase the distance of the main light to the subject to make this easier. The key factor for getting a soft and directional quality to the light is also distance, but it's the opposite. By getting the light closer to the subject, we can create a softer light with more directional qualities. Also remember that these qualities of the light are relative to the size of the light source. If you are using a smaller light source, you will need to get it in closer to hold those transitional values. If you are using a larger light source, you may be able to get your light further back and still hold those soft-light qualities. Also, if the examples and basic principles here make sense to you, you have kind of just learned the inverse square law!
Look no further! This is an awesome kit. I was very impressed with the weight and quality of the hardware. The poles are thick and sturdy, and it includes a brochure with basic instructions. The set comes with multiple bags: the large primary bag that holds everything, and smaller "set" bags (two for the umbrellas/softboxes and one for the back muslin stand). Overall I am very satisfied with this purchase and highly recommend this set. Also, the seller was great with communication.
Stands often come with crossbars that can support a cloth, vinyl, muslin, or paper backdrop and are secured by either slipping it through a pole pocket or by clamps. For many stands, a crossbar is not needed if the backdrop is canvas or vinyl and has a wooden mounting. Single portable backdrop stands are also available. Portable photography stands are easy to set up, break down, and transport to locations.
You can channel our cavemen ancestry with Custom Photo Prop’s Faux Fur Mat, safe in the knowledge that no animals were harmed in their making. These synthetic mats are PETA-approved, machine-washable and hypoallergenic. They can be ordered as a basket stuffer in a 20 x 32-inch size. It’s sold as a 15 x 15-inch layer or in 3 x 5-foot and 5 x 6-foot sizes. They’re super comfortable on baby’s skin as well.
Browse our collection of photography props including posing stools, steps for seated and standing shots, numbers, and more. These photography props are also ideal for theatre productions, catalog shoots, school portraits and more. With multiple options available, you are sure to find the photography props you need at the low prices you want. Interested in learning more about photography props? Check out What Posing Props Can Do For Your Photo Shoot!
Wholesale Decorating PhotographyWholesale Make PhotographyWholesale Open PhotographyWholesale Christmas Photography BackgroundsWholesale Outdoor Wedding PhotographyWholesale Red Wedding PhotographyWholesale Vinyl Photography Backdrops SeniorWholesale Photography MusicWholesale Umbrella White PhotographyWholesale Baby Photography WoolWholesale Photography Backdrops OldWholesale Hot Girl PhotographyWholesale Studio Background For Wedding PhotographyWholesale Photography Background Printed DigitalWholesale Vinyl Printed Photography Backdrops Christmas
Stock up on extra drive components such as chains, switches, and weights, so you can quickly replace broken or missing parts. Be sure to keep plenty of spare clips, hooks, and brackets on hand so portrait backgrounds and video backdrops stay in place during shoots. Maintain clean and organized work spaces by storing paper rolls and mounting poles on wall-mounted and freestanding storage racks.
×