The idea is to hang this backdrop so that some of the floor print is actually hanging up off the floor and this works very well. The full-length photo shows this way of hanging the backdrop. However, it also works very well if you just hang the backdrop so that the brick is straight up and the floor print is on the floor. The creases from the item being folded are not avoidable, but I did not do a thing to try to remove them and, as you can see, they did not cause any problems in these photos. I am very careful to fold the backdrop when I'm done with it on exactly the same creases so as not cause any further creases or wrinkles. It's easy to do, but a large floor area is very helpful when folding. The smaller sized one might be a better option if you shooting only single subjects. I bought the LimoStudio backdrop frame LimoStudio Photo Video Studio Adjustable Muslin Background Backdrop Support System Stand & Cross Bar, AGG1111and the two together are awesome. I truly love this product!
Users love the price and the quality of the product, but some do note that it’s too light for their liking. The Linco T-shaped backdrop stand features a sturdy design, a set of crossbars, and clamps to keep the fabric in place. Another great thing about this product is that it’s light – just four lbs., and you don’t need any special skills to assemble it. What’s more, you can adjust it from 2.6 ft. to 6.7 ft. 
This project is simple and doesn’t take very long at all, maybe about an hour from start to finish. After you’re finished, you will want to roll up the fabric and lights for storage until the wedding. Consider covering it as well, to keep and dirt or dust from settling on it. We covered ours with garbage bags since black dog fur and white curtains are not exactly friends.
The main cause of this working is distance. Notice how close the subject is standing to the background and how far away the main light is from the subject. In this example, the subject is approximately 2 feet from the backdrop and the main light is approximately 4 feet from the subject. If you're new to this, I would recommend starting with your main light a bit further back to make it a little less challenging. You will see why in a second.
At Backdrop Express we offer a wide selection of backdrop support systems, with options for every type of photographer. Whether you're a student, have limited storage space, or have been in the industry for many years and are just looking for an upgrade, we have a backdrop stand to meet your needs. All our backdrop stands are secure, reliable and professional-quality! These easy-to-use and easy-to-store backdrop stands are cost-effective and versatile, easily supporting most standard photography backdrops, including muslin backdrops and seamless paper. Check out our wide selection of Backdrop Kits & save money when you purchase a backdrop with your backdrop stand!
Stock up on extra drive components such as chains, switches, and weights, so you can quickly replace broken or missing parts. Be sure to keep plenty of spare clips, hooks, and brackets on hand so portrait backgrounds and video backdrops stay in place during shoots. Maintain clean and organized work spaces by storing paper rolls and mounting poles on wall-mounted and freestanding storage racks.
Express your love of geology with ProStudio’s Hard Rock Poser. They may look back-breaking, but these posers are made from plastic and are hollow inside so you can move them around your studio, or to a location, with ease. (Pro tip: Pretend they’re real and lift one over your head to impress friends and clients.) The poser has a flat top and is sturdy enough for an adult to sit on. The small rock measures in at 19 x 14 x 12 inches while a large model is 27 x 21 x 25 inches. Additional sizes and rock colors are also available.
The backdrops used for photography are usually made of lighter material which makes it easy for the photographers to carry them around while traveling. The backdrops are usually hung as panels or can be easily draped over anything to give a particular effect. They can also be suspended from background stands by using clamps. Depending upon the type of effect needed by the photographer, the type and size of backdrop can be selected from the wide variety available. Since backdrops require some support, there are many types of background supports available that are well-suited for location work, or even sophisticated permanent studios.
Please keep your expectations realistic: this is a $30 backdrop that will be delivered to your door. This is not fancy. This isn't printed on the best of materials, but do you need it to be? If you're a professional photographer who has worked with backdrops that are $200 a pop, you shouldn't waste your time with this one. But if you're like me, just cutting my teeth out on this business, this is a fine investment that is fun and easy.
This is the Meking background support system with a crossbar that telescopes from 77cm to 200cm. It can hold paper or cloth backgrounds to a maximum of almost 200cm.   Item features: Heavy duty 18mm,22mm and 25mm diameter tubes holds the heavy backdrop or drapes light background stand convenient for on-location work where portability is required The three legs spread out quickly and are freestanding Special locking system and the power clamp designed for stability and secure the backdrop usage   Item features: The lowest height of tripod: 77cm The highest height of tripod:200cm Crossbar length: 3 segments about 200cm Crossbar diameter:25mm.
In summary, the key factors to getting the backdrop and subject lit in a similar exposure zone is distance; The distance of the subject to the background and the distance of the light source to the subject. Decrease the distance of the subject to background and increase the distance of the main light to the subject to make this easier. The key factor for getting a soft and directional quality to the light is also distance, but it's the opposite. By getting the light closer to the subject, we can create a softer light with more directional qualities. Also remember that these qualities of the light are relative to the size of the light source. If you are using a smaller light source, you will need to get it in closer to hold those transitional values. If you are using a larger light source, you may be able to get your light further back and still hold those soft-light qualities. Also, if the examples and basic principles here make sense to you, you have kind of just learned the inverse square law!

This is my first DIY project. I decided to make this backdrop stand so when I film my YouTube videos. I bought all of the products used from my local Home Depot. I bought three 10 feet long PCV pipes. 4 end caps, 4 T-caps and 2 Elbow Caps. I had a Home Depot Employee cut the PCV pipe for me in store. The 1st PCV was cut in TWO 54 inch long pieces. The 2nd PCV pipe was cut into FOUR 30 inch long pieces. The 3rd PCV pipe was cut into FOUR 12 inch long pieces. I got this idea from Pinterest and I found it very helpful. I spent $10.23 total, including tax, and it took me less than 10 minutes to construct this project. This is great for Vlogging, low-budget photography studios or even a photo-booth at an or birthday party!
Alright so at first I was kinda debating on whether or not to get it because of all of the mixed reviews but I'm glad I got it because it's perfect for what I needed. I'm a free lance illustrator and besides working at home, I go to conventiontions quite frequently and I needed something that would help the whole set up process go by faster and opted for this and honestly, I'm glad I did.
The fill light for this shoot is also a Profoto D1 1,000W strobe in a Westcott Apollo Orb, which is camera right and with the light sitting about waist height. This light is also pulled back a bit further than the main to give a wider spill. Since I am using my lights to do two jobs, lighting the subject and the background, I am not gridding and instead placing them so that one edge of the modifier is pointing towards the edge of the seamless and the other is towards the subject.
The folks at the slanted lens are anything but low value so it was kinda surprising to see that many of their setups are actually low-budget DIYs. The short below shows six of those tricks including a plumbing backdrop hanger, a ton of budgety lighting solutions (some of which we have covered in the past, but their softbox is pure budget geniusity) and my favorite, another use for a tarp.
Get an austere rustic look with Background Town’s Wall Yellow. It’s available in two materials. NewFab is a tear resistant “paper-like” substrate that’s wrinkle resistant and won’t reflect light. It’s sold in 3.9 x 5-foot and 5 x 6.8-foot sizes. NewFab backdrops won’t come with rod pockets and aren’t machine washable. If you need a backdrop with those attributes, spring for Background Town’s UltraCloth material, a machine-washable backdrop that’s wrinkle-free and has rod pockets sewn in. It’s sold in sizes ranging from 6 x 8 to 8 x 12 feet.

Photo Floors or as we like to call them Roll Up Floors are the perfect compliment to any backdrop. Lightweight, easy to roll for storage, and very realistic.  Photography floors are made of a thick durable neoprene rubber backed material which provides an anti slip faux flooring mat.  Whether you are looking for a faux wood photography flooring or trying to bring the grass fields indoors, there are tons of options.
×