For gear, I used my Canon 50mm 1.4 lens. My camera settings for most of the shots you saw were f1.8, ISO 640 and shutter speed around 250. No flash. Just natural light. You really just need to play around with it a bit depending on your lighting situation and what not. Be brave and use that manual mode on your camera or at least the aperture priority setting. I did test shots using stuffed toys while the little guy was napping so as not to “waste” any precious time with him and risk missing any good shots. If you have older kids that will sit still you can get some really cool shots! If only Mr. C was old enough for an M&M bribe. Mr Moose did well though…. Here’s a test shot…..
A traditional backdrop support system is the most common mounting solution for photography studios. The backdrop support system consists of a 3-section cross bar and two light stands. By utilizing two of the included cross bars, the backdrop support system can mount backdrops up to 7-feet wide. By utilizing all three cross bars, this system can mount backdrops up to 10.5-feet wide. The included stands can extend up to 12-feet high for photographing tall people, high movement, or products.
I was a little thrown off that it came folded up in an envelop, as this lead to some significant "creasing". However, I just laid the material flat, rolled it up and hung it vertically so gravity would pull the creases out. After a couple of days of hanging, it is pretty much wrinkle free. I had been a little concerned about other reviewers' comments about the image quality (digital printing) on the actual backdrop, but mine is perfectly fine. Again, my only "negative" is that the backdrop appears to have a greater "floor depth" than what I currently have.
I recently bought this 3 days ago and used it to shoot 38 headshots and a group photo for a university. The images came out fantastic!! I was amazed that the light quality was excellent and the light stands were sturdy without sandbags to fasten it. I bought a used kit but it was greatly taken cared of. I wanted an easy portable light kit and this is perfect very light weight and cost effective. Backgroynd stand is great, Muslim is thin in black but just double it up and youll be fine for headshots.
Important Disclaimer: The information contained on Top5Reviewed.com is intended for informational and educational purposes only. Any statements made on this website have not been evaluated by the FDA and any information or products discussed are not intended to diagnose, cure, treat or prevent any disease or illness. Please consult a healthcare practitioner before making changes to your diet or taking supplements that may interfere with medications.
In summary, the key factors to getting the backdrop and subject lit in a similar exposure zone is distance; The distance of the subject to the background and the distance of the light source to the subject. Decrease the distance of the subject to background and increase the distance of the main light to the subject to make this easier. The key factor for getting a soft and directional quality to the light is also distance, but it's the opposite. By getting the light closer to the subject, we can create a softer light with more directional qualities. Also remember that these qualities of the light are relative to the size of the light source. If you are using a smaller light source, you will need to get it in closer to hold those transitional values. If you are using a larger light source, you may be able to get your light further back and still hold those soft-light qualities. Also, if the examples and basic principles here make sense to you, you have kind of just learned the inverse square law!
There are a few things to consider when choosing a backdrop size, including the size of your studio and the size of your subject. Portrait subjects should typically be pulled at least 3’ away from your backdrop to prevent shadows and allow for easy lighting. Of course, this distance your subject will be from the backdrop will be altered when taking overhead or backlit/high key shots. Below, we’ll discuss both the length and width restrictions of common backdrops.
6× Photo Studio Light Photography Background Clips Backdrop Clamps Peg Package Contents: 6 clamps Description： These Set of 6 Universal Pro Clamps are easy to use and would be a great addition to your studio. These clamps are extremely useful in positioning or stretching your background onto backdrop support systems. Clamps are perfect when you need to attach any kind of fabric background to a support system. They work perfectly for Muslin, paper, and even canvas backdrops. These clamps are also known as spring clamps, A-clamps, and even studio tongs.
Display your photographic backdrops, floors, and floordrops using durable support equipment and accessories. You'll find a variety of stands and support kits that come with everything you need for mobile photography projects and studio setups. Many styles feature telescoping crossbars and adjustable bases to suit a variety of image heights and widths. Some support systems also feature multicolored chains so you can easily select the right background for your needs.