I just got this today and attached it to my back drop stand using A Clamps across the top. There are some crease marks where it was folded so I will try various tricks I found on the internet to get them out, hopefully, without melting or ruining it. I didn't give it 5 stars because it is a little small at 5'x7' for anything but a seated subject. That's not the sellers fault as it clearly states 5'x7' but I would definitely recommend it if it were 6'x9' or larger. Even with the folded creases, it works well out of the box.
Fast delivery. The product arrived in it's original box only. There was obvious wear on the box where the product inside fits snuggly against the box. There was also a hole in the lower portion of the box. When you open the box the two stands are in seperate bags (as pictured) and the two poles are together in plastic. I could see several small holes in both bags where they rubbed against the box. The biggest hole is really a cut about 1/2 long. I was disappointed but then I didn't buy the product for the bags. Taking the stands out of the bags I was surprised to find them undamaged. So, I had to put it together. It was easy to assemble and disassemble by myself. I've done it twice. (Hint: if you can't unsnap the ... full review
Backdrops tend to be at the center of your event, whether it's a photo booth backdrop, standard photography, or a tradeshow booth. They bring life, charm, and enjoyment to your subjects. With a photo booth in particular, your customers get to play. So...they're necessary. With over 500 hundred to choose from (and the option to custom-design your own), PB Backdrops has you covered.
In summary, the key factors to getting the backdrop and subject lit in a similar exposure zone is distance; The distance of the subject to the background and the distance of the light source to the subject. Decrease the distance of the subject to background and increase the distance of the main light to the subject to make this easier. The key factor for getting a soft and directional quality to the light is also distance, but it's the opposite. By getting the light closer to the subject, we can create a softer light with more directional qualities. Also remember that these qualities of the light are relative to the size of the light source. If you are using a smaller light source, you will need to get it in closer to hold those transitional values. If you are using a larger light source, you may be able to get your light further back and still hold those soft-light qualities. Also, if the examples and basic principles here make sense to you, you have kind of just learned the inverse square law!
The most simple way to hang a backdrop is by using wall hooks. This solution is suitable for people using smaller and lighter backdrops. 5 x 7-foot X-Drop Backdrops and 3.5 x 3.5-foot backdrops feature built-in grommets for use with hooks. While you can install these into your wall, we recommend picking up a pack of removable wall hooks to protect your walls. They are usually under $10 USD per pack.
I recently bought this 3 days ago and used it to shoot 38 headshots and a group photo for a university. The images came out fantastic!! I was amazed that the light quality was excellent and the light stands were sturdy without sandbags to fasten it. I bought a used kit but it was greatly taken cared of. I wanted an easy portable light kit and this is perfect very light weight and cost effective. Backgroynd stand is great, Muslim is thin in black but just double it up and youll be fine for headshots.
The fill light for this shoot is also a Profoto D1 1,000W strobe in a Westcott Apollo Orb, which is camera right and with the light sitting about waist height. This light is also pulled back a bit further than the main to give a wider spill. Since I am using my lights to do two jobs, lighting the subject and the background, I am not gridding and instead placing them so that one edge of the modifier is pointing towards the edge of the seamless and the other is towards the subject.
For gear, I used my Canon 50mm 1.4 lens. My camera settings for most of the shots you saw were f1.8, ISO 640 and shutter speed around 250. No flash. Just natural light. You really just need to play around with it a bit depending on your lighting situation and what not. Be brave and use that manual mode on your camera or at least the aperture priority setting. I did test shots using stuffed toys while the little guy was napping so as not to “waste” any precious time with him and risk missing any good shots. If you have older kids that will sit still you can get some really cool shots! If only Mr. C was old enough for an M&M bribe. Mr Moose did well though…. Here’s a test shot…..
The picture posted here is definitely deceiving, but overall I am happy with the product. I don't know how the photographer edited and/or modified the print in the listing to have the "depth" of the floor like that. I have two pictures that I will submit to show what I received - these are UN-EDITED photos (not run through Photoshop, only added my name to the bottom). I ended up using a floor cloth, as you can clearly see in the image. If the photographer used a separate floor cloth to achieve the extended "brick" look, I could understand it, but as the photo stands it is very deceiving. Obviously there were some adjustments made to bring out the colors in the background too. I can easily achieve the same "rich" colors in Photoshop or some other similar photo editing program.
There's no hiding the fact that the LimoStudio 3-Piece Softbox Set is a bare-bones package. The only accessories included with this package are three stands, three softboxes, 12 bulbs, and a case. The boxes and stands are of a good size, and the stands are adjustable to different angles. In the end, however, brightness (and a budget price) are the features that make the LimoStudio a standout.
The Hand Painted Background is made from durable high quality muslin material and is 100% cotton to help absorb the light and eliminate reflection. It is completely seamless being made from one piece of material. It comes with a 4" rod pocket at one end. It is machine washable and crimped along the edges to prevent tears. It is light weight and easy to fold. Please allow for 5-8% manufacturing shrinkage. Package Contents One (1) 10 'x 12 ' W001 Muslin Backdrop Specifications -100% cotton to absorb the light and help eliminate reflection -completely Seamless, made from one piece of material -3.5" rod pocket at one end -Allow for 5-8% manufacturing shrinkage.
A Computer Printed Photography Backdrop can be printed either on a canvas material, a wrinkle free material (Freedom Cloth), or even as a pop up portable backdrop (Twist Flex). Printed backdrops are available in a variety of styles and sizes. If you have any questions or need a little help choosing the perfect design for your backdrop, please don't hesitate to contact us at 1-800-844-5616.