This was my first order with this product and I like it. The only thing that threw me off is that I expected it to be as pictured. Brick all as the 9x6 and the extra white on the bottom. It is in fact 9x6. I have included a couple test shots. The product works as expected. I love white back grounds. I think that this adds just a little bit of texture to them. Also important to not be right up against the backdrop. make sure that you get some distant between the subject and the back drop.


well my fault i didnt pay attention to other posted reviews that said order multiples. i only ordered one and of course it was no where near enough to do a proper back drop. so i will need to buy maybe 2 more. the picture seems a tad misleading cos it looks like just one solid panel. One Panel is the equivalent of one of my House curtains. which is where i hung this up, over my windows, to make a back drop for our New years eve family party. LOL it was real conversation piece.
This is the Meking background support system with a crossbar that telescopes from 77cm to 200cm. It can hold paper or cloth backgrounds to a maximum of almost 200cm.   Item features: Heavy duty 18mm,22mm and 25mm diameter tubes holds the heavy backdrop or drapes light background stand convenient for on-location work where portability is required The three legs spread out quickly and are freestanding Special locking system and the power clamp designed for stability and secure the backdrop usage   Item features: The lowest height of tripod: 77cm The highest height of tripod:200cm Crossbar length: 3 segments about 200cm Crossbar diameter:25mm.

Last is the Julius Studio, which is another crossbar set up that spans up to 10 ft. Like the others, this one also comes with a carry bag and the necessary clamps for securing your backdrop of choice. Also, like the others, this one is made of lightweight tubing that makes it easy to carry. Lastly, while users said this was easy to set up and use, they recommend using sandbags or some other type of weight to keep the system secure due to the light weight of the tubing.
This kind of fabric has an amazing quality that absorbs light from flashes around the studio. It enables you to have a pitch-black (if using black velour) portrait background that will not reflect the light from your flash or lighting equipment. This way, you don’t have to worry about the direction of light affecting the background because it leaves no detail.
Once I got the equipment out of the box, the entire kit took about 20-30 minutes to set up and break down. I'm expecting it'll be quicker once I've gotten used to it, but the kit's otherwise simple enough to handle. The backdrops are rather thin, but enough for my current needs. I'll need to be more aware of what's behind the muslin, and the sheets can be easily replaced by thicker material when necessary. The metal supports on the umbrellas are enough to keep the things open, but aren't very tolerant of, say, a klutz who knocks the stand over while setting up. (Nothing's broken, and everything's still useful, but... yeah, that bend wasn't there in the umbrella before.) The bag is sturdy enough for lugging things around, but it isn't padded - I've been using the muslins for that purpose. I'm keeping all the equipment boxes and plastic baggies to make sure things stay tidy, but if you wanted to, you could cut it down to just the containers for the light bulbs. Overall, pretty chuffed with this kit.
The folks at the slanted lens are anything but low value so it was kinda surprising to see that many of their setups are actually low-budget DIYs. The short below shows six of those tricks including a plumbing backdrop hanger, a ton of budgety lighting solutions (some of which we have covered in the past, but their softbox is pure budget geniusity) and my favorite, another use for a tarp.
Position these lights to point at the backdrop and use manual settings to achieve the “blown out highlights” effect. Make sure the light reading is at least 3 stops higher than the light on your subject. Light bounced off the blown-out background will also create a back-lighting effect on your subject, the degree of back-lighting depends on the angle at which background light are pointed at the background.
There's no hiding the fact that the LimoStudio 3-Piece Softbox Set is a bare-bones package. The only accessories included with this package are three stands, three softboxes, 12 bulbs, and a case. The boxes and stands are of a good size, and the stands are adjustable to different angles. In the end, however, brightness (and a budget price) are the features that make the LimoStudio a standout.
Get an austere rustic look with Background Town’s Wall Yellow. It’s available in two materials. NewFab is a tear resistant “paper-like” substrate that’s wrinkle resistant and won’t reflect light. It’s sold in 3.9 x 5-foot and 5 x 6.8-foot sizes. NewFab backdrops won’t come with rod pockets and aren’t machine washable. If you need a backdrop with those attributes, spring for Background Town’s UltraCloth material, a machine-washable backdrop that’s wrinkle-free and has rod pockets sewn in. It’s sold in sizes ranging from 6 x 8 to 8 x 12 feet.
With a 20 or 24-foot long backdrop you’ll be able to cover just about every style of portraiture and product photography. These backdrops are great if you want to photograph a larger family full-length, or have a video shoot that requires movement. These long backdrops are great for when you want to pull your subjects far from your backdrop as well.
Cotton is a great photo background because it works well with the subject, especially if the lighting is properly set up. Also, if you want a backdrop that’s perfect for traveling, invest in a cotton fabric backdrop. It’s portable and easy to transport, set up, and collapse. It varies in size, too, so make sure to pick the right one before going to your location.

Position these lights to point at the backdrop and use manual settings to achieve the “blown out highlights” effect. Make sure the light reading is at least 3 stops higher than the light on your subject. Light bounced off the blown-out background will also create a back-lighting effect on your subject, the degree of back-lighting depends on the angle at which background light are pointed at the background.
The idea is to hang this backdrop so that some of the floor print is actually hanging up off the floor and this works very well. The full-length photo shows this way of hanging the backdrop. However, it also works very well if you just hang the backdrop so that the brick is straight up and the floor print is on the floor. The creases from the item being folded are not avoidable, but I did not do a thing to try to remove them and, as you can see, they did not cause any problems in these photos. I am very careful to fold the backdrop when I'm done with it on exactly the same creases so as not cause any further creases or wrinkles. It's easy to do, but a large floor area is very helpful when folding. The smaller sized one might be a better option if you shooting only single subjects. I bought the LimoStudio backdrop frame LimoStudio Photo Video Studio Adjustable Muslin Background Backdrop Support System Stand & Cross Bar, AGG1111and the two together are awesome. I truly love this product!
To start constructing this DIY backdrop, measure how thick your elbow is compared to your curtain rod, and add electrical tape around the end of the rod until you have a tight fit. For most people, it will be easier to put a little bit of tape on at a time, testing the fit every so often until it’s snug, but measurements can give you a good base to start with. Don’t attach the rod to the elbow yet, however.
I would definitely play around with it. Your not going to want to go too wide with 4 because odds are they will move around a bit and you’ll end up with some soft faces. Some key things to remember would be try to keep their faces all on the same plane of focus, that will allow you to shoot a little wider. Generally with 4 kids I would aim to shoot around f/4 but certainly play around. At that aperture you may want to consider moving them further away from the background. Keep in mind the closer you are to them and the further away from the background they are the more bokeh you will get!
Backdrops tend to be at the center of your event, whether it's a photo booth backdrop, standard photography, or a tradeshow booth. They bring life, charm, and enjoyment to your subjects. With a photo booth in particular, your customers get to play. So...they're necessary. With over 500 hundred to choose from (and the option to custom-design your own), PB Backdrops has you covered.

Football season is nearly upon us and Backdrop Express’s sports and stadium-themed printed backdrops are a great way to capitalize on the bone crunching. They’re available in poly paper or vinyl in either 4 x 5-foot or 5 x 6-foot sizes, or a fabric with sizes ranging from 5 x 6.5 feet up to 10 x 10 feet in a choice of light or heavyweight. The poly paper version is water resistant and has a matte finish. If you opt for vinyl, you’ll get a more durable backdrop that’s also water resistant and has a matte finish. The heavyweight fabric is a polyester/cotton knot that’s washable and wrinkle resistant with a sewn-in rod pocket. The lightweight fabric is a 100 percent polyester weave that Backdrop Express likens to a tablecloth. It, too, is wrinkle resistant, though less than the heavyweight fabric. On the plus side, Backdrop Express says the printed design is “slightly clearer” on the lightweight version. Decisions, decisions. 


The backdrops not high definition, will some blurred,so need distance to take pictures. Also many large format images may seem a little pixelated when you view it up close but I make sure that only suitable images are used for the drops to provide the most realistic look possible.Please keep in mind that all computer screens vary in color calibration.
I ordered this backdrop, because I've been recently getting into some basic photography and needed a backdrop in a standard, simple color. Please note that included with your purchase is ONLY the backdrop and clamps for it. The stand is sold separately. It came shipped to me in a smaller flat box. The backdrop itself was wrapped in a cellophane bag inside the box. The five spring clamps were in a smaller cellophane bag inside the box as well. The clamps were very good quality-they stayed closed without any slipping. The stitching and fabric quality looked very good, especially for the price. It's not thick enough to completely block out any light behind so be prepared to plan accordingly. It is not too thin either though in my opinion. The thinner material makes for easier storage. And yes it does have wrinkles when you unfold it, but that is easy ... full review
What this tells us is that the further away the light source is from the subject and backdrop, the more likely we are to get an equal exposure from one to the other. The quality of the light source can also change with distance. You will notice that as the light gets further away it becomes a harder light with less transitional values. Also, if the subject appears to be further away from the backdrop in the last image, it's due to me needing to use a shorter focal length (zoom out) to avoid getting the softbox in the shot. The shorter focal length exaggerates perspective.
Create the ideal setting for your photo shoots with photo backdrops and backdrop equipment. To accommodate a variety of client needs, consider stocking up on a selection of solid color and printed photo backdrops. Whether you own a collection of seamless background paper or you're just starting out in the business, you can choose from numerous designs and accessories suitable for headshots, family portraits, and product photography.
×