I would definitely play around with it. Your not going to want to go too wide with 4 because odds are they will move around a bit and you’ll end up with some soft faces. Some key things to remember would be try to keep their faces all on the same plane of focus, that will allow you to shoot a little wider. Generally with 4 kids I would aim to shoot around f/4 but certainly play around. At that aperture you may want to consider moving them further away from the background. Keep in mind the closer you are to them and the further away from the background they are the more bokeh you will get!
One of the main questions are customers ask us is “what is the difference between continuous and strobe lighting?” Continuous lighting uses a constant light source to light your subject, meaning that your lights will stay on during the entirety of your photo shoot. Continuous lighting is recommended for beginners. Strobe lighting uses a flash of light at the moment your camera shutter opens to illuminate your subject. Many professionals use this type of lighting because it offers more control of the light.
Think of the Pearl photo booth as magic on a stand. Capture the smiles, capture the joy, turn it into top quality photos with customizable messages and graphics, then send these off into the world - all in a flash. Ideal for weddings, corporate functions, birthday parties, proms . . . you get the picture. The Pearl sets up in minutes, creates joy and memories for hours.
What this tells us is that the further away the light source is from the subject and backdrop, the more likely we are to get an equal exposure from one to the other. The quality of the light source can also change with distance. You will notice that as the light gets further away it becomes a harder light with less transitional values. Also, if the subject appears to be further away from the backdrop in the last image, it's due to me needing to use a shorter focal length (zoom out) to avoid getting the softbox in the shot. The shorter focal length exaggerates perspective.
This is my first DIY project. I decided to make this backdrop stand so when I film my YouTube videos. I bought all of the products used from my local Home Depot. I bought three 10 feet long PCV pipes. 4 end caps, 4 T-caps and 2 Elbow Caps. I had a Home Depot Employee cut the PCV pipe for me in store. The 1st PCV was cut in TWO 54 inch long pieces. The 2nd PCV pipe was cut into FOUR 30 inch long pieces. The 3rd PCV pipe was cut into FOUR 12 inch long pieces. I got this idea from Pinterest and I found it very helpful. I spent $10.23 total, including tax, and it took me less than 10 minutes to construct this project. This is great for Vlogging, low-budget photography studios or even a photo-booth at an or birthday party!
Vinyl backdrops are thick, rolled and durable, and are recommended for professional studio work. They generally come in solids, but there are a few with printed patterns that can be very inexpensive. While most vinyl backgrounds have a glossy sheen, there are some (including a recently announced line by Savage, which includes the Savage Matte Finish Gray Infinity Series vinyl background) that have a matte finish to eliminate glare and reflections.
A. Regardless of the lighting system you’ve selected, you should have at least some control over the light intensity. A basic lighting system should allow you to adjust the power of the lighting to half or full. More complex systems will give you several settings options to control the intensity of the lighting. If you purchase an inexpensive lighting system, you’ll have to spend more time adjusting the physical position of the light to achieve the exact intensity of light on the subject you want.
The Emart portable background support kit features adjustable crossbars, an aluminum alloy construction for portability and durability, heavy-duty spring clamps, and heavy-duty nylon sandbags. Another great thing about this product is that it comes with a bag so that you can take it with you on your trips. What’s more, you can adjust the height from 2.6 to 7 ft and the width from 5 to 10 ft.
Canvas backgrounds are made of a moderately thick, heavy fabric. These backdrops are mostly painted to look like classic paintings or have imagery of scenic realism. They are also known as roll drops or scenics and need a suspension system. Usually, photographers use motorized backdrop stands though background rollers can also be used to clamp the canvas. A good canvas backdrop can provide an amazing look to the photographers scenes and can even last for a longer span of time. These backdrops are also available with subtle patterns or even neutral backgrounds which highlights the portrait subject.
These are better than I expected. Good solid build. Takes about a good solid hour to assemble everything. Everything worked perfectly after assembly. No sand for the sandbag, so I put a bottle of water in the pouch. Worked perfect as a counterweight. I live in a one bedroom apartment, so I put two of the lights away after testing and keep one assembled for impulse shoots.
I ordered this backdrop, because I've been recently getting into some basic photography and needed a backdrop in a standard, simple color. Please note that included with your purchase is ONLY the backdrop and clamps for it. The stand is sold separately. It came shipped to me in a smaller flat box. The backdrop itself was wrapped in a cellophane bag inside the box. The five spring clamps were in a smaller cellophane bag inside the box as well. The clamps were very good quality-they stayed closed without any slipping. The stitching and fabric quality looked very good, especially for the price. It's not thick enough to completely block out any light behind so be prepared to plan accordingly. It is not too thin either though in my opinion. The thinner material makes for easier storage. And yes it does have wrinkles when you unfold it, but that is easy ... full review
Though I had an idea for the DIY photo booth backdrop a long time ago, it took awhile for me and my fiance to get around to constructing it. We decided we wanted a backdrop with a sheer white curtain and bright string lights. We settled on the string lights because of their warm vibe. Plus, we thought they tied in nicely with our loosely light-themed wedding.
The fill light for this shoot is also a Profoto D1 1,000W strobe in a Westcott Apollo Orb, which is camera right and with the light sitting about waist height. This light is also pulled back a bit further than the main to give a wider spill. Since I am using my lights to do two jobs, lighting the subject and the background, I am not gridding and instead placing them so that one edge of the modifier is pointing towards the edge of the seamless and the other is towards the subject.
The picture posted here is definitely deceiving, but overall I am happy with the product. I don't know how the photographer edited and/or modified the print in the listing to have the "depth" of the floor like that. I have two pictures that I will submit to show what I received - these are UN-EDITED photos (not run through Photoshop, only added my name to the bottom). I ended up using a floor cloth, as you can clearly see in the image. If the photographer used a separate floor cloth to achieve the extended "brick" look, I could understand it, but as the photo stands it is very deceiving. Obviously there were some adjustments made to bring out the colors in the background too. I can easily achieve the same "rich" colors in Photoshop or some other similar photo editing program.
Great for the price point! Will get lots of use out of it. Biggest issue was setting it up, theres absolutely no instructions that comes with this set. There is a piece of paper titled “instructions” BUT it’s literally just a list of what’s inside the packaging and not how to put it together. Had to watch a video online to figure it out. This was my first time setting up something like this. Also the polls are a little flimsy and I’m always worried about it falling over however again you pay what you get, don’t expect top of the line equipment when you’re purchasing relatively cheap stuff. Anyways thumbs up from me, it’s basically exactly what I needed.
If you do many in-studio portrait sessions, you probably have a lot of space set aside for background materials, props, and supports. Add to your stash with canvas backdrops for photography, and selections made of durable, low-maintenance materials, such as cotton and wrinkle-resistant polyester. Several backgrounds come on rolls so you can mount them to autopoles and smoothly swap out designs between poses. Seamless paper works particularly well for everyday needs, as you can roll sheets out to the desired length and then reuse or trim away pieces for easy recycling. Muslin photo and video backdrops feature non-reflective surfaces that diffuse light more naturally, which can help keep the focus on your subject. If you prefer materials that allow for fast and efficient cleanup, vinyl and PVC backgrounds are a solid choice, especially when you use them in potentially messy situations involving pets, babies, and toddlers.