A. Regardless of the lighting system you’ve selected, you should have at least some control over the light intensity. A basic lighting system should allow you to adjust the power of the lighting to half or full. More complex systems will give you several settings options to control the intensity of the lighting. If you purchase an inexpensive lighting system, you’ll have to spend more time adjusting the physical position of the light to achieve the exact intensity of light on the subject you want.
The folks at the slanted lens are anything but low value so it was kinda surprising to see that many of their setups are actually low-budget DIYs. The short below shows six of those tricks including a plumbing backdrop hanger, a ton of budgety lighting solutions (some of which we have covered in the past, but their softbox is pure budget geniusity) and my favorite, another use for a tarp.
Stands often come with crossbars that can support a cloth, vinyl, muslin, or paper backdrop and are secured by either slipping it through a pole pocket or by clamps. For many stands, a crossbar is not needed if the backdrop is canvas or vinyl and has a wooden mounting. Single portable backdrop stands are also available. Portable photography stands are easy to set up, break down, and transport to locations.
Buyer beware!! Fell apart after 1 use :( The plastic pieces separate from the poles. The adjustment valve on one side is completely stuck so I cannot adjust sizing. Seller dismissed my contact...I'd honestly just like to exchange for hopefully one that is not defective but seller in not responding. Very disappointed in this purchase. I buy from Amazon very often and this has been my first issue with low quality merchandise.
The latest addition to our lineup, these are serious solutions for serious exhibitors who need much more powerful and attention-grabbing setups than backdrops or backgrounds: a single system and they will create the perfect walk-in booth for your expo or promotional event. They assemble swiftly, they're lightweight, durable, highly portable, and you can add vivid custom graphics.
I've purchased a few backdrops with this company (LB) now, and though I **HATE** the sizing of their backdrops (way too short and not wide enough), the quality of them are so good for the price. This one is versatile in my opinion: we used it for a murder mystery party that took place in ancient China (oh yeah!), but I've seen pictures of people using this as a studio backup for couple pictures and so forth. I think it's a fun one that deserves to be purchased more often.
I just got this today and attached it to my back drop stand using A Clamps across the top. There are some crease marks where it was folded so I will try various tricks I found on the internet to get them out, hopefully, without melting or ruining it. I didn't give it 5 stars because it is a little small at 5'x7' for anything but a seated subject. That's not the sellers fault as it clearly states 5'x7' but I would definitely recommend it if it were 6'x9' or larger. Even with the folded creases, it works well out of the box.
When I want new portraits of my kids, I never head to the photography studio. Instead, I head to the kitchen or front room, where I get great window light. I’m willing to spend a lot more time than most photographers would with my kids to get just the photo I want, and I often photograph them right in front of a blank wall for an easy background. This can get old pretty quickly, though, so I’ve collected 20 different options for easy DIY backdrops you can use in your home.
The Emart portable background support kit features adjustable crossbars, an aluminum alloy construction for portability and durability, heavy-duty spring clamps, and heavy-duty nylon sandbags. Another great thing about this product is that it comes with a bag so that you can take it with you on your trips. What’s more, you can adjust the height from 2.6 to 7 ft and the width from 5 to 10 ft.
Anyone that does any kind of handy work around the house (or anywhere for that matter) definitely needs to keep a few of these on hand. They are simple. They are plastic, but they feel very strong. The spring inside is REALLY strong! It's got a tight grip for sure! I have around 40-50 of these (different brands) that I've acquired over the years doing woodworking projects. These rank right up there with the best ones! If you're gluing something, these are a must to clamp the parts together. Great grip and as inexpensive as you're going to find! (currently $9.99/1.67ea). Hard to argue with that!
To start constructing this DIY backdrop, measure how thick your elbow is compared to your curtain rod, and add electrical tape around the end of the rod until you have a tight fit. For most people, it will be easier to put a little bit of tape on at a time, testing the fit every so often until it’s snug, but measurements can give you a good base to start with. Don’t attach the rod to the elbow yet, however.
Users love the portable carrying bag, but some do note that it’s not heavy-duty or suitable for heavy fabrics. The ePhoto support stand kit is made of lightweight aluminum for portability, and you can adjust the height up to 8 ft. and the width to 10 ft. Another great thing about this product is that you can set it up in minutes, store it in the included carry bag and take it with you.

The package arrived in a Manila folder therefore had lot of creases. I follow the instructions and ironed it and as you can see in the photos the creases diminished greatly. My husband made a 2x4 frame for it with wood already available as we do no have a photographer stand. It came out lovely. I can’t wait for the final result as the date arrives. Well worth the money! Not the greatest quality of material but it’s also not bad for what’s intended for.


Breaking news: Bokeh is in! With Lastolite’s Out of Focus Backgrounds, you won’t need to fiddle with your camera’s aperture to mimic that dreamy depth of field. There are a pair of double-sided backdrops in the Out of Focus line: one features a blurred seascape/autumn foliage, and the other sports summer foliage on one side and city lights on the other. At 4 x 5 feet, these backdrops should handle close to full-length portraits and will collapse to about a third of their size for transport. They weigh in at 3.3 pounds and come with their own carrying case. 
The package arrived in a Manila folder therefore had lot of creases. I follow the instructions and ironed it and as you can see in the photos the creases diminished greatly. My husband made a 2x4 frame for it with wood already available as we do no have a photographer stand. It came out lovely. I can’t wait for the final result as the date arrives. Well worth the money! Not the greatest quality of material but it’s also not bad for what’s intended for.
6× Photo Studio Light Photography Background Clips Backdrop Clamps Peg Package Contents: 6 clamps Description: These Set of 6 Universal Pro Clamps are easy to use and would be a great addition to your studio. These clamps are extremely useful in positioning or stretching your background onto backdrop support systems. Clamps are perfect when you need to attach any kind of fabric background to a support system. They work perfectly for Muslin, paper, and even canvas backdrops. These clamps are also known as spring clamps, A-clamps, and even studio tongs.
Hand Painted photography backdrops are at a quality level all their own. With over 45 years of experience, we have mastered creating the perfect hand painted background replica every time. We are capable of handling the most delicate of color changes in our Old Master backgrounds. The Old Master series of hand painted canvases are sure to please and will last for many years if cared for properly.
×