A user also mentions that the frame feels slightly flimsy, but he hasn’t had any problems with it. He adds that he is satisfied with its performance so far and that the carrying bag is a nice bonus. However, one customer complains that the product’s measurements are not correct and that it’s not strong enough to hold the vinyl in place without dipping.


For gear, I used my Canon 50mm 1.4 lens. My camera settings for most of the shots you saw were f1.8,  ISO 640 and shutter speed around 250. No flash. Just natural light. You really just need to play around with it a bit depending on your lighting situation and what not.  Be brave and use that manual mode on your camera or at least the aperture priority setting. I did test shots using stuffed toys while the little guy was napping so as not to “waste” any precious time with him and risk missing any good shots. If you have older kids that will sit still you can get some really cool shots! If only Mr. C was old enough for an M&M bribe. Mr Moose did well though…. Here’s a test shot…..
The main cause of this working is distance. Notice how close the subject is standing to the background and how far away the main light is from the subject. In this example, the subject is approximately 2 feet from the backdrop and the main light is approximately 4 feet from the subject. If you're new to this, I would recommend starting with your main light a bit further back to make it a little less challenging. You will see why in a second.
Fast delivery. The product arrived in it's original box only. There was obvious wear on the box where the product inside fits snuggly against the box. There was also a hole in the lower portion of the box. When you open the box the two stands are in seperate bags (as pictured) and the two poles are together in plastic. I could see several small holes in both bags where they rubbed against the box. The biggest hole is really a cut about 1/2 long. I was disappointed but then I didn't buy the product for the bags. Taking the stands out of the bags I was surprised to find them undamaged. So, I had to put it together. It was easy to assemble and disassemble by myself. I've done it twice. (Hint: if you can't unsnap the ... full review
If you're looking for photography backdrops suitable for outdoor or portable use, collapsible backgrounds are both economical and space-efficient choices. Many fold down to a third of their size, and come with convenient carrying bags so you have room to pack and protect multiple backgrounds. Several styles feature reversible designs, to give clients a choice of colors and patterns. Pastel pink and blue backgrounds work well for baby showers. Urban-inspired prints let kids and teens show off their more expressive side. You'll also find options in camera-ready, chroma-key colors suitable for special effects projects.
This is my first DIY project. I decided to make this backdrop stand so when I film my YouTube videos. I bought all of the products used from my local Home Depot. I bought three 10 feet long PCV pipes. 4 end caps, 4 T-caps and 2 Elbow Caps. I had a Home Depot Employee cut the PCV pipe for me in store. The 1st PCV was cut in TWO 54 inch long pieces. The 2nd PCV pipe was cut into FOUR 30 inch long pieces. The 3rd PCV pipe was cut into FOUR 12 inch long pieces. I got this idea from Pinterest and I found it very helpful. I spent $10.23 total, including tax, and it took me less than 10 minutes to construct this project. This is great for Vlogging, low-budget photography studios or even a photo-booth at an or birthday party!

To start constructing this DIY backdrop, measure how thick your elbow is compared to your curtain rod, and add electrical tape around the end of the rod until you have a tight fit. For most people, it will be easier to put a little bit of tape on at a time, testing the fit every so often until it’s snug, but measurements can give you a good base to start with. Don’t attach the rod to the elbow yet, however.


Again, if you are starting out or having trouble I would recommend getting the light a little further back (somewhere between 4 to 8 feet if using a similar sized light source). You will also notice that the right side of my backdrop is actually not 100 percent white, it fades to a light gray shade. I could increase my fill or correct this in post-processing, but the slight shift is intentional in this image.
Position these lights to point at the backdrop and use manual settings to achieve the “blown out highlights” effect. Make sure the light reading is at least 3 stops higher than the light on your subject. Light bounced off the blown-out background will also create a back-lighting effect on your subject, the degree of back-lighting depends on the angle at which background light are pointed at the background.
well my fault i didnt pay attention to other posted reviews that said order multiples. i only ordered one and of course it was no where near enough to do a proper back drop. so i will need to buy maybe 2 more. the picture seems a tad misleading cos it looks like just one solid panel. One Panel is the equivalent of one of my House curtains. which is where i hung this up, over my windows, to make a back drop for our New years eve family party. LOL it was real conversation piece.
Buyer beware!! Fell apart after 1 use :( The plastic pieces separate from the poles. The adjustment valve on one side is completely stuck so I cannot adjust sizing. Seller dismissed my contact...I'd honestly just like to exchange for hopefully one that is not defective but seller in not responding. Very disappointed in this purchase. I buy from Amazon very often and this has been my first issue with low quality merchandise.
Package Included: 1 x 2x3m Backdrop Crossbar Kit 1 x Carry CASE 4x Background Clamps(FREE GIFT) Description: This brand new portable background/backdrop support stand kit is extremely suitable for all level photographers from amateurs to professionals. It is a perfect solution to produce photo and video for web retailers and commercial product catalog, especially for costume and portrait. Very easy to use and set up in minutes.
The idea is to hang this backdrop so that some of the floor print is actually hanging up off the floor and this works very well. The full-length photo shows this way of hanging the backdrop. However, it also works very well if you just hang the backdrop so that the brick is straight up and the floor print is on the floor. The creases from the item being folded are not avoidable, but I did not do a thing to try to remove them and, as you can see, they did not cause any problems in these photos. I am very careful to fold the backdrop when I'm done with it on exactly the same creases so as not cause any further creases or wrinkles. It's easy to do, but a large floor area is very helpful when folding. The smaller sized one might be a better option if you shooting only single subjects. I bought the LimoStudio backdrop frame LimoStudio Photo Video Studio Adjustable Muslin Background Backdrop Support System Stand & Cross Bar, AGG1111and the two together are awesome. I truly love this product!
Welcome to PB Backdrops, here to help you bring your photo booth to life. The photo booth has come a long way since the days of the little kiosk at the mall, we know that, you know that. No longer the tiny thing with the curtain, it's now big and lavish, accessorized by the ton, and people are flocking to it, making it the center of any well-thrown party. At PB Backdrops we'll set you up with greatest backdrops, whether you're looking for tension fabric, pillowcase, pipe and drape - doesn't matter; we have it all, and we have it at the best price. So step on into our online store and take a look around. Anything you have questions about - don't be afraid to ask. We're here to help.
This is a durable and well made photography back drop. All stitching is tight with no loose threads. It includes 5 spring clamps for hanging, or it can be hung using the sewn in rod pockets. It's made of 100% cotton and is a nice weight without being too heavy. Overall I'm very happy with this backdrop and recommend it to anyone looking for a nice white one.
No more wasting your money on cheap vinyl. We've got just what you're looking for in a professional fabric photo backdrop. We print on high quality, matte finish, non-glare cloth with a dye sublimation process that exceeds expectations. We even have three different fabrics to choose from, allowing for further individualization! Other companies either print on subpar materials (like vinyl, muslin, or even paper!) or they print direct to fabric, which lessens the resolution and leaves you wanting more. Here at Photo Pie, we pride ourselves on providing excellent customer service through your entire ordering process. Whether you're needing a one time backdrop for a party or needing durable, wrinkle free backdrops for your photography studio, we've got professionally sublimated backdrops just for you!
×