No space? No problem. The 42 x 42 x 42-inch Little Studio unfolds to deliver a corner studio setting in any location. Its metal frame is shrouded in white diffusion fabric and has hook-and-loop edges so you can mount backdrops and floor mats with ease. When the shoot is over, the Little Studio folds down and slips into an included nylon carrying case. You can completely disassemble the studio if you really need to pack it down. 
This project is simple and doesn’t take very long at all, maybe about an hour from start to finish. After you’re finished, you will want to roll up the fabric and lights for storage until the wedding. Consider covering it as well, to keep and dirt or dust from settling on it. We covered ours with garbage bags since black dog fur and white curtains are not exactly friends.
It was higher quality then I had expected . One side is a very soft and silky/shiny material. The photo is only on one side , just to let you know . Needs to be ironed but ours broke and we do not have an iron at the moment. If the lines were out it would look absolutely gorgeous. Totally changed the feel of a room. Bought the 60”W by 80”L . Not disappointed.
These are better than I expected. Good solid build. Takes about a good solid hour to assemble everything. Everything worked perfectly after assembly. No sand for the sandbag, so I put a bottle of water in the pouch. Worked perfect as a counterweight. I live in a one bedroom apartment, so I put two of the lights away after testing and keep one assembled for impulse shoots.
Important Disclaimer: The information contained on Top5Reviewed.com is intended for informational and educational purposes only. Any statements made on this website have not been evaluated by the FDA and any information or products discussed are not intended to diagnose, cure, treat or prevent any disease or illness. Please consult a healthcare practitioner before making changes to your diet or taking supplements that may interfere with medications.
I just got this today and attached it to my back drop stand using A Clamps across the top. There are some crease marks where it was folded so I will try various tricks I found on the internet to get them out, hopefully, without melting or ruining it. I didn't give it 5 stars because it is a little small at 5'x7' for anything but a seated subject. That's not the sellers fault as it clearly states 5'x7' but I would definitely recommend it if it were 6'x9' or larger. Even with the folded creases, it works well out of the box.
To start constructing this DIY backdrop, measure how thick your elbow is compared to your curtain rod, and add electrical tape around the end of the rod until you have a tight fit. For most people, it will be easier to put a little bit of tape on at a time, testing the fit every so often until it’s snug, but measurements can give you a good base to start with. Don’t attach the rod to the elbow yet, however.

Having skills in a variety of lighting techniques for your photo backdrop can give you some wonderful options for creating beautiful imagery for either products or portraits. By brushing up on your exposure and composition know-how along with practicing prior to your actual shoot date you’ll quickly be able to build a portfolio showing off your creative depth.


It may be our summer issue but winter isn’t all that far off (sorry), and with White House Custom Color’s Through the Woods backdrop, you can put your subjects in a Robert Frost-esque scene without the frostbite. Like the other backdrops in WHCC’s collection, this one is made of wrinkle-free, 100 percent polyester fabric. It’s sold in either 10 x 8-feet or 6 x 8-feet sizes.  
Package Included: 1 x 2x3m Backdrop Crossbar Kit 1 x Carry CASE 4x Background Clamps(FREE GIFT) Description: This brand new portable background/backdrop support stand kit is extremely suitable for all level photographers from amateurs to professionals. It is a perfect solution to produce photo and video for web retailers and commercial product catalog, especially for costume and portrait. Very easy to use and set up in minutes.

Great for the price point! Will get lots of use out of it. Biggest issue was setting it up, theres absolutely no instructions that comes with this set. There is a piece of paper titled “instructions” BUT it’s literally just a list of what’s inside the packaging and not how to put it together. Had to watch a video online to figure it out. This was my first time setting up something like this. Also the polls are a little flimsy and I’m always worried about it falling over however again you pay what you get, don’t expect top of the line equipment when you’re purchasing relatively cheap stuff. Anyways thumbs up from me, it’s basically exactly what I needed.
These lights worked perfectly for what I purchased them for - as part of the backdrop for my Christmas pictures. They are a great, long length and width and shine brightly, but they are not overpowering. I had no issues stringing them up at all. They have a steady on mode as well as several different blinking modes. My only complaint is that the plug did not fit into my standard outlet - it was very loose and kept sliding out, so I had to tape it in to use it. Also, there is no off switch, so these have to be unplugged when not in use. Like I said, though, they worked great for my intended purpose.
The main cause of this working is distance. Notice how close the subject is standing to the background and how far away the main light is from the subject. In this example, the subject is approximately 2 feet from the backdrop and the main light is approximately 4 feet from the subject. If you're new to this, I would recommend starting with your main light a bit further back to make it a little less challenging. You will see why in a second.
The fill light for this shoot is also a Profoto D1 1,000W strobe in a Westcott Apollo Orb, which is camera right and with the light sitting about waist height. This light is also pulled back a bit further than the main to give a wider spill. Since I am using my lights to do two jobs, lighting the subject and the background, I am not gridding and instead placing them so that one edge of the modifier is pointing towards the edge of the seamless and the other is towards the subject.
Alright so at first I was kinda debating on whether or not to get it because of all of the mixed reviews but I'm glad I got it because it's perfect for what I needed. I'm a free lance illustrator and besides working at home, I go to conventiontions quite frequently and I needed something that would help the whole set up process go by faster and opted for this and honestly, I'm glad I did.
There are a few things to consider when choosing a backdrop size, including the size of your studio and the size of your subject. Portrait subjects should typically be pulled at least 3’ away from your backdrop to prevent shadows and allow for easy lighting. Of course, this distance your subject will be from the backdrop will be altered when taking overhead or backlit/high key shots. Below, we’ll discuss both the length and width restrictions of common backdrops.
Express your love of geology with ProStudio’s Hard Rock Poser. They may look back-breaking, but these posers are made from plastic and are hollow inside so you can move them around your studio, or to a location, with ease. (Pro tip: Pretend they’re real and lift one over your head to impress friends and clients.) The poser has a flat top and is sturdy enough for an adult to sit on. The small rock measures in at 19 x 14 x 12 inches while a large model is 27 x 21 x 25 inches. Additional sizes and rock colors are also available.
Any photo op is just as exciting as the party itself with our unique photo booth props. Stick props that include everything from emojis to silly monsters to zoo animals? Check. Costume accessories that you can wear and share like hats, masks and glasses? Yep, we got 'em. Novelty jewelry in every color and style? You better believe it! Set all of these fun finds out next to your DIY photo booth for guests to grab as the prepare to pose. Best of all, they double as take home party favors once the celebration wraps.
For gear, I used my Canon 50mm 1.4 lens. My camera settings for most of the shots you saw were f1.8,  ISO 640 and shutter speed around 250. No flash. Just natural light. You really just need to play around with it a bit depending on your lighting situation and what not.  Be brave and use that manual mode on your camera or at least the aperture priority setting. I did test shots using stuffed toys while the little guy was napping so as not to “waste” any precious time with him and risk missing any good shots. If you have older kids that will sit still you can get some really cool shots! If only Mr. C was old enough for an M&M bribe. Mr Moose did well though…. Here’s a test shot…..
A user also mentions that the frame feels slightly flimsy, but he hasn’t had any problems with it. He adds that he is satisfied with its performance so far and that the carrying bag is a nice bonus. However, one customer complains that the product’s measurements are not correct and that it’s not strong enough to hold the vinyl in place without dipping.
The key to getting those gorgeous big bubbles of light in the background is to locate your subject a decent distance from the lights while at the same time positioning yourself as close to your subject as you can be to get the shot you want and setting the aperture on your camera just about as wide open as you can. The further away your subject is from the lights, the closer your are to your subject and the wider the aperture…..the bigger the lights.
Easy to use and looks good in portraits. I used a stand by Fancierstudio and clips by LimoStudio and got this backdrop set up nicely. It's plenty long, and looks like you could cut it up and use it to cover a larger area, however I wish it were wider. It's just barely wide enough for a good portrait, but not any wider. It looks good if you put your subject a foot or so in front of it with a large aperture and get some bokeh on it.
Material:Thin Vinyl plastic cloth(not washable). Features: Light absorbant Non-reflective.No pocket Type: Computer-printed for realism. For: different sizes for wedding, audlt, children, holiday party etc. Vinyl cloth backdrops is our latest and greatest computer painted wrinkle-free fleece-like fabric. This lightweight fabric will give you the intense vivid color that you have been looking for in a backdrop.
This project is simple and doesn’t take very long at all, maybe about an hour from start to finish. After you’re finished, you will want to roll up the fabric and lights for storage until the wedding. Consider covering it as well, to keep and dirt or dust from settling on it. We covered ours with garbage bags since black dog fur and white curtains are not exactly friends.

What can I say? This background is flimsy and cheap and you can see right through it and it's packed folded and the creases never come out. It arrived with a few runs which is frustrating but you get what you pay for. All of that being said, under the right conditions the backdrop does photograph well, if you know what your doing. Shallow DOF and creative lighting and it did what it was needed for, which in my case was a quick set up for a baby holiday portrait.
There are a few things to consider when choosing a backdrop size, including the size of your studio and the size of your subject. Portrait subjects should typically be pulled at least 3’ away from your backdrop to prevent shadows and allow for easy lighting. Of course, this distance your subject will be from the backdrop will be altered when taking overhead or backlit/high key shots. Below, we’ll discuss both the length and width restrictions of common backdrops.
×