For gear, I used my Canon 50mm 1.4 lens. My camera settings for most of the shots you saw were f1.8, ISO 640 and shutter speed around 250. No flash. Just natural light. You really just need to play around with it a bit depending on your lighting situation and what not. Be brave and use that manual mode on your camera or at least the aperture priority setting. I did test shots using stuffed toys while the little guy was napping so as not to “waste” any precious time with him and risk missing any good shots. If you have older kids that will sit still you can get some really cool shots! If only Mr. C was old enough for an M&M bribe. Mr Moose did well though…. Here’s a test shot…..
This Studio portrait umbrella Kit is easy to use and setup. These lights work great with digital cameras. It is ideal for all level photographers. It is a complete kit with a complete background supporting system with case. 3 section cross bar open up to 9ft and 8ft height. THREE 6' x 9' muslin backdrop(black, white and green) and a continuous lighting umbrellas kit.
In summary, the key factors to getting the backdrop and subject lit in a similar exposure zone is distance; The distance of the subject to the background and the distance of the light source to the subject. Decrease the distance of the subject to background and increase the distance of the main light to the subject to make this easier. The key factor for getting a soft and directional quality to the light is also distance, but it's the opposite. By getting the light closer to the subject, we can create a softer light with more directional qualities. Also remember that these qualities of the light are relative to the size of the light source. If you are using a smaller light source, you will need to get it in closer to hold those transitional values. If you are using a larger light source, you may be able to get your light further back and still hold those soft-light qualities. Also, if the examples and basic principles here make sense to you, you have kind of just learned the inverse square law!
SquareTrade Protection Plans are only valid for new or Amazon certified refurbished products purchased at Amazon in the last 30 days. By purchasing this Protection Plan you agree to the Protection Plan Terms & Conditions (http://www.squaretrade.com/terms-standard). Your Protection Plan Terms & Conditions will be delivered via email within 24 hours of purchase
I am helping a friend’s daughter with her wedding planning and want to make a backdrop like this for the wedding ceremony. Can you elaborate on how the strings of lights were plugged in and whether they all “hung” versus the string light hanging down and then looping back up, if that makes sense? I like the look of them just hanging but it seems like plugging a bunch of individual ones would be hard. Am I making this too complicated?!
Again, if you are starting out or having trouble I would recommend getting the light a little further back (somewhere between 4 to 8 feet if using a similar sized light source). You will also notice that the right side of my backdrop is actually not 100 percent white, it fades to a light gray shade. I could increase my fill or correct this in post-processing, but the slight shift is intentional in this image.
Great for the price point! Will get lots of use out of it. Biggest issue was setting it up, theres absolutely no instructions that comes with this set. There is a piece of paper titled “instructions” BUT it’s literally just a list of what’s inside the packaging and not how to put it together. Had to watch a video online to figure it out. This was my first time setting up something like this. Also the polls are a little flimsy and I’m always worried about it falling over however again you pay what you get, don’t expect top of the line equipment when you’re purchasing relatively cheap stuff. Anyways thumbs up from me, it’s basically exactly what I needed.
What can I say? This background is flimsy and cheap and you can see right through it and it's packed folded and the creases never come out. It arrived with a few runs which is frustrating but you get what you pay for. All of that being said, under the right conditions the backdrop does photograph well, if you know what your doing. Shallow DOF and creative lighting and it did what it was needed for, which in my case was a quick set up for a baby holiday portrait.
I was really excited to get this backdrop for my new YouTube channel (Nia Knows Best) and it did not fail. The quality is thick (which is good), and it is NOT transparent. That's perfect because I have a wall of magazine pictures behind this backdrop and yet you can't see anything but the shimmer of the rose gold glitter. The only thing I would say is that depending on the lighting the rose gold turns into a silver ish glitter which can be a little frustrating. In the last photo you can see how just because of the lighting switching, the rose gold turns into silver. Other than that it is perfect.
One of the main questions are customers ask us is “what is the difference between continuous and strobe lighting?” Continuous lighting uses a constant light source to light your subject, meaning that your lights will stay on during the entirety of your photo shoot. Continuous lighting is recommended for beginners. Strobe lighting uses a flash of light at the moment your camera shutter opens to illuminate your subject. Many professionals use this type of lighting because it offers more control of the light.
Browse our collection of photography props including posing stools, steps for seated and standing shots, numbers, and more. These photography props are also ideal for theatre productions, catalog shoots, school portraits and more. With multiple options available, you are sure to find the photography props you need at the low prices you want. Interested in learning more about photography props? Check out What Posing Props Can Do For Your Photo Shoot!
This is one of the best purchases I've made! I have a Talk Show and wanted good lighting and a place for my banner without spending hundreds of dollars. Well this was it! The stand where you hang your back drop, extends. It can go extremely wide or small enough to hang a small banner for an event. Same thing with the length. It can go as high as 6/7ft and as low as 2/3ft. Everything came new, nothing broke, everything worked. All four light stands can raise high or go low. For people using this for photography I strongly recommend getting some brighter light bulbs. This would be my only issue and recommendation. The bulbs are not bright enough at all. Its ok for the mean time or if you don't really need bright lights. It's amazing how this entire set up can be broken down quickly and all packed into a large, black, gym bag looking thingy that it comes in (of course inside the delivery box). I've had it for about a year and have taken it down atleast twice. My daughter and I put it back together when we moved in about 20 min or less. It comes with 4 light stands, 2 with umbrellas & 2 with the square light covers, 2 light covers, 1 backdrop stand, 3 sheets (black, green, white), 4 light bulbs, 3/4 clips for sheets & large black gym bag. Highly Recommend!
To start constructing this DIY backdrop, measure how thick your elbow is compared to your curtain rod, and add electrical tape around the end of the rod until you have a tight fit. For most people, it will be easier to put a little bit of tape on at a time, testing the fit every so often until it’s snug, but measurements can give you a good base to start with. Don’t attach the rod to the elbow yet, however.
A Computer Printed Photography Backdrop can be printed either on a canvas material, a wrinkle free material (Freedom Cloth), or even as a pop up portable backdrop (Twist Flex). Printed backdrops are available in a variety of styles and sizes. If you have any questions or need a little help choosing the perfect design for your backdrop, please don't hesitate to contact us at 1-800-844-5616.