This was my first order with this product and I like it. The only thing that threw me off is that I expected it to be as pictured. Brick all as the 9x6 and the extra white on the bottom. It is in fact 9x6. I have included a couple test shots. The product works as expected. I love white back grounds. I think that this adds just a little bit of texture to them. Also important to not be right up against the backdrop. make sure that you get some distant between the subject and the back drop.
The seller describes this as “seamless”.... not even close! This is the CHEAPEST photo backdrop I’ve ever bought. It was folded in packaging in a way that there were folds every 8 x 10 inches- completely unusable. I tried to steam out the wrinkles (because this in no way is fabric- I didn’t want to risk putting it in the dryer). The steaming was unsuccessful. I tried putting it in the dryer for a minute or 2 and the wrinkles were all still there but the ink was not!
Overall a beautiful backdrop. More yellow than I was expecting though. The yellowish center on mine is very large and bright, with much less brown/green than the one pictured. I used it for a dance troupe portrait and the yellow wasn’t flattering with everyone’s skin tone. Too bland. However, I changed the color in post and I LOVE the result. The yellow center became a natural bright spot under whatever color I painted with, and is a lovely effect. I have included pictures. The first one is mostly unaltered in color, just darkened a little. I am keeping the backdrop, knowing that I’ll have to be careful with subject/lighting or paint it in post-processing.
Everyone wants to feel special, and when you buy a Drop It Modern fabric backdrop you’ll be one of 15 photographers to gain access to that style—the company maintains a limited inventory so that each style is more exclusive. These non-reflective canvas linen fabric backdrops are sold in 54- or 98-inch widths and 108-inch lengths. Wrinkle resistant and seamless, these backdrops can be machine washed and tumbled dry on low heat. Pictured here is Sunray.
Last is the Julius Studio, which is another crossbar set up that spans up to 10 ft. Like the others, this one also comes with a carry bag and the necessary clamps for securing your backdrop of choice. Also, like the others, this one is made of lightweight tubing that makes it easy to carry. Lastly, while users said this was easy to set up and use, they recommend using sandbags or some other type of weight to keep the system secure due to the light weight of the tubing.
Features: 1.5-In-1 Design: Fill-in light ring, Bluetooth shutter, Selfie Stick, Phone Holder, Tripod Lamp 2.Wide Application: Widely applied to podcast, live video, video chat, selfie fill light, makeup, filling light indoors, portrait, fashion, wedding art, advertisement photography, etc.3.With Controller: Brightness up and down(10-level brightness), light color switching and power on/off easily handled through the controller 4.3-Light Color: Warm Light, Soft Light, White light. Different light color delivers differetn shooting results. 5.Eye Protection Light Source: Soft light photography light with stepless dimming, can be adjusted to your desired level. 6.Designed to Last: High quality led bead equipepd, flicker-free, no light ra.
This is the Meking background support system with a crossbar that telescopes from 77cm to 200cm. It can hold paper or cloth backgrounds to a maximum of almost 200cm. Item features: Heavy duty 18mm,22mm and 25mm diameter tubes holds the heavy backdrop or drapes light background stand convenient for on-location work where portability is required The three legs spread out quickly and are freestanding Special locking system and the power clamp designed for stability and secure the backdrop usage Item features: The lowest height of tripod: 77cm The highest height of tripod:200cm Crossbar length: 3 segments about 200cm Crossbar diameter:25mm.
In this SOOC shot, you can see just how down and dirty this setup was. The backdrop is not pulled out very far and taped down only in a couple of spots. In the top left edge of the image you can see the corner of the 50 inch Apollo. This also shows that the right edge of the light is hitting the subject, allowing for a soft feathered look, but more importantly for this setup, it's allowing the rest of the box to light our background.
I was a little thrown off that it came folded up in an envelop, as this lead to some significant "creasing". However, I just laid the material flat, rolled it up and hung it vertically so gravity would pull the creases out. After a couple of days of hanging, it is pretty much wrinkle free. I had been a little concerned about other reviewers' comments about the image quality (digital printing) on the actual backdrop, but mine is perfectly fine. Again, my only "negative" is that the backdrop appears to have a greater "floor depth" than what I currently have.
One of the main questions are customers ask us is “what is the difference between continuous and strobe lighting?” Continuous lighting uses a constant light source to light your subject, meaning that your lights will stay on during the entirety of your photo shoot. Continuous lighting is recommended for beginners. Strobe lighting uses a flash of light at the moment your camera shutter opens to illuminate your subject. Many professionals use this type of lighting because it offers more control of the light.
This is my first DIY project. I decided to make this backdrop stand so when I film my YouTube videos. I bought all of the products used from my local Home Depot. I bought three 10 feet long PCV pipes. 4 end caps, 4 T-caps and 2 Elbow Caps. I had a Home Depot Employee cut the PCV pipe for me in store. The 1st PCV was cut in TWO 54 inch long pieces. The 2nd PCV pipe was cut into FOUR 30 inch long pieces. The 3rd PCV pipe was cut into FOUR 12 inch long pieces. I got this idea from Pinterest and I found it very helpful. I spent $10.23 total, including tax, and it took me less than 10 minutes to construct this project. This is great for Vlogging, low-budget photography studios or even a photo-booth at an or birthday party!
The backdrop support system typically mounts backdrops that feature a pole pocket. This pocket simply slides onto the cross bars. Backdrops without a pole pocket can also be mounted to the backdrop support system with spring clamps. Spring clamps (AKA A-Clamps) can be found at any hardware store and typically only cost a few dollars. These clamps are great to have around your studio, as they also allow you to clamp backdrops taut at the bottom to eliminate wrinkles or shadows.
I am helping a friend’s daughter with her wedding planning and want to make a backdrop like this for the wedding ceremony. Can you elaborate on how the strings of lights were plugged in and whether they all “hung” versus the string light hanging down and then looping back up, if that makes sense? I like the look of them just hanging but it seems like plugging a bunch of individual ones would be hard. Am I making this too complicated?!
If you're looking for photography backdrops suitable for outdoor or portable use, collapsible backgrounds are both economical and space-efficient choices. Many fold down to a third of their size, and come with convenient carrying bags so you have room to pack and protect multiple backgrounds. Several styles feature reversible designs, to give clients a choice of colors and patterns. Pastel pink and blue backgrounds work well for baby showers. Urban-inspired prints let kids and teens show off their more expressive side. You'll also find options in camera-ready, chroma-key colors suitable for special effects projects.