As I expected with cotton it came quite wrinkled, but as any cotton the wrinkles come out well. Of course, ironing requires work and on such large piece of fabric it took about 15 minutes. Cotton will wrinkle again if it is folded for storage, so ideally it would be best to store it mounted on the stands, but for me it is not possible due to lack of space. So I expect that I will need to iron it again, but hopefully it will take less time compared to the initial ironing as I packed it less tightly. Steam ironing works best. For a large piece of fabric like this I use a separate bottle to spray mist on ... full review


Fast delivery. The product arrived in it's original box only. There was obvious wear on the box where the product inside fits snuggly against the box. There was also a hole in the lower portion of the box. When you open the box the two stands are in seperate bags (as pictured) and the two poles are together in plastic. I could see several small holes in both bags where they rubbed against the box. The biggest hole is really a cut about 1/2 long. I was disappointed but then I didn't buy the product for the bags. Taking the stands out of the bags I was surprised to find them undamaged. So, I had to put it together. It was easy to assemble and disassemble by myself. I've done it twice. (Hint: if you can't unsnap the ... full review
This is the Meking background support system with a crossbar that telescopes from 77cm to 200cm. It can hold paper or cloth backgrounds to a maximum of almost 200cm.   Item features: Heavy duty 18mm,22mm and 25mm diameter tubes holds the heavy backdrop or drapes light background stand convenient for on-location work where portability is required The three legs spread out quickly and are freestanding Special locking system and the power clamp designed for stability and secure the backdrop usage   Item features: The lowest height of tripod: 77cm The highest height of tripod:200cm Crossbar length: 3 segments about 200cm Crossbar diameter:25mm.
Cotton is a great photo background because it works well with the subject, especially if the lighting is properly set up. Also, if you want a backdrop that’s perfect for traveling, invest in a cotton fabric backdrop. It’s portable and easy to transport, set up, and collapse. It varies in size, too, so make sure to pick the right one before going to your location.
I love this backdrop for photos; I used it for my daughters pictures to use on her first birthday card. However, as other reviewers stated, getting the creases out is nearly impossible. I took another persons idea of wrapping it around a pole (one of those long, skinny paint rollers meant for painting ceilings - so very skinny). I wrapped it around the pole and used tape to hold it in place for TWO WEEKS. While it helped with the creases a little bit, they were still pretty visible. I would love to purchase more of these for future use but am hesitant; I wish the supplier would ship them rolled in tubes as opposed to folding them.
The StudioPRO 3000W's included backdrops add a lot of value and a professional touch that users love. The 10-foot power cord often eliminates the need for an extension, and can reduce anxiety over tripping on a taut line. The lightweight equipment and small case store easily, and if you travel a lot, you would be hard-pressed to find a more portable model.
What can I say? This background is flimsy and cheap and you can see right through it and it's packed folded and the creases never come out. It arrived with a few runs which is frustrating but you get what you pay for. All of that being said, under the right conditions the backdrop does photograph well, if you know what your doing. Shallow DOF and creative lighting and it did what it was needed for, which in my case was a quick set up for a baby holiday portrait.
Once I got the equipment out of the box, the entire kit took about 20-30 minutes to set up and break down. I'm expecting it'll be quicker once I've gotten used to it, but the kit's otherwise simple enough to handle. The backdrops are rather thin, but enough for my current needs. I'll need to be more aware of what's behind the muslin, and the sheets can be easily replaced by thicker material when necessary. The metal supports on the umbrellas are enough to keep the things open, but aren't very tolerant of, say, a klutz who knocks the stand over while setting up. (Nothing's broken, and everything's still useful, but... yeah, that bend wasn't there in the umbrella before.) The bag is sturdy enough for lugging things around, but it isn't padded - I've been using the muslins for that purpose. I'm keeping all the equipment boxes and plastic baggies to make sure things stay tidy, but if you wanted to, you could cut it down to just the containers for the light bulbs. Overall, pretty chuffed with this kit.
Having skills in a variety of lighting techniques for your photo backdrop can give you some wonderful options for creating beautiful imagery for either products or portraits. By brushing up on your exposure and composition know-how along with practicing prior to your actual shoot date you’ll quickly be able to build a portfolio showing off your creative depth.
This is my first DIY project. I decided to make this backdrop stand so when I film my YouTube videos. I bought all of the products used from my local Home Depot. I bought three 10 feet long PCV pipes. 4 end caps, 4 T-caps and 2 Elbow Caps. I had a Home Depot Employee cut the PCV pipe for me in store. The 1st PCV was cut in TWO 54 inch long pieces. The 2nd PCV pipe was cut into FOUR 30 inch long pieces. The 3rd PCV pipe was cut into FOUR 12 inch long pieces. I got this idea from Pinterest and I found it very helpful. I spent $10.23 total, including tax, and it took me less than 10 minutes to construct this project. This is great for Vlogging, low-budget photography studios or even a photo-booth at an or birthday party!
This is my first DIY project. I decided to make this backdrop stand so when I film my YouTube videos. I bought all of the products used from my local Home Depot. I bought three 10 feet long PCV pipes. 4 end caps, 4 T-caps and 2 Elbow Caps. I had a Home Depot Employee cut the PCV pipe for me in store. The 1st PCV was cut in TWO 54 inch long pieces. The 2nd PCV pipe was cut into FOUR 30 inch long pieces. The 3rd PCV pipe was cut into FOUR 12 inch long pieces. I got this idea from Pinterest and I found it very helpful. I spent $10.23 total, including tax, and it took me less than 10 minutes to construct this project. This is great for Vlogging, low-budget photography studios or even a photo-booth at an or birthday party!

Everyone wants to feel special, and when you buy a Drop It Modern fabric backdrop you’ll be one of 15 photographers to gain access to that style—the company maintains a limited inventory so that each style is more exclusive. These non-reflective canvas linen fabric backdrops are sold in 54- or 98-inch widths and 108-inch lengths. Wrinkle resistant and seamless, these backdrops can be machine washed and tumbled dry on low heat. Pictured here is Sunray. 
Backdrops tend to be at the center of your event, whether it's a photo booth backdrop, standard photography, or a tradeshow booth. They bring life, charm, and enjoyment to your subjects. With a photo booth in particular, your customers get to play. So...they're necessary. With over 500 hundred to choose from (and the option to custom-design your own), PB Backdrops has you covered.
Yes all the "bad" stuff they say about this product is true, it's essentially a very long roll of wrapping paper, thin, wrinkles easily. BUT that being said, if you treat it with just a little TLC this stuff performs beautifully. Photographs extremely well. Perfect for the beginner photographer on a limited budget, or like myself a more seasoned photographer with a small studio, I highly recommend this product. For the price it can't be beat! This photo was taken on the "barn wood" version.
So why only 4 stars and not 5? I personally don't like the very top of the backdrop. If you look at the pictures carefully (I don't know if you can actually see this because I tried to crop these out), it looks like there are ceiling lights on a dark alley street. Scientifically, that's impossible and realistically, it looks WEIRD. But other than that, it's near perfect for what you're paying for.
6× Photo Studio Light Photography Background Clips Backdrop Clamps Peg Package Contents: 6 clamps Description: These Set of 6 Universal Pro Clamps are easy to use and would be a great addition to your studio. These clamps are extremely useful in positioning or stretching your background onto backdrop support systems. Clamps are perfect when you need to attach any kind of fabric background to a support system. They work perfectly for Muslin, paper, and even canvas backdrops. These clamps are also known as spring clamps, A-clamps, and even studio tongs.
Users love the price and the quality of the product, but some do note that it’s too light for their liking. The Linco T-shaped backdrop stand features a sturdy design, a set of crossbars, and clamps to keep the fabric in place. Another great thing about this product is that it’s light – just four lbs., and you don’t need any special skills to assemble it. What’s more, you can adjust it from 2.6 ft. to 6.7 ft. 

The backdrop support system typically mounts backdrops that feature a pole pocket. This pocket simply slides onto the cross bars. Backdrops without a pole pocket can also be mounted to the backdrop support system with spring clamps. Spring clamps (AKA A-Clamps) can be found at any hardware store and typically only cost a few dollars. These clamps are great to have around your studio, as they also allow you to clamp backdrops taut at the bottom to eliminate wrinkles or shadows.


I recently bought this 3 days ago and used it to shoot 38 headshots and a group photo for a university. The images came out fantastic!! I was amazed that the light quality was excellent and the light stands were sturdy without sandbags to fasten it. I bought a used kit but it was greatly taken cared of. I wanted an easy portable light kit and this is perfect very light weight and cost effective. Backgroynd stand is great, Muslim is thin in black but just double it up and youll be fine for headshots.
You can channel our cavemen ancestry with Custom Photo Prop’s Faux Fur Mat, safe in the knowledge that no animals were harmed in their making. These synthetic mats are PETA-approved, machine-washable and hypoallergenic. They can be ordered as a basket stuffer in a 20 x 32-inch size. It’s sold as a 15 x 15-inch layer or in 3 x 5-foot and 5 x 6-foot sizes. They’re super comfortable on baby’s skin as well.
Don't take this review too critical to the overall worth of the product. Ultimately you pay for what you get and this is a very reasonable price for a starter home studio setup. I've been working with freelance photography for a few years now, primarily as a hobby, and decided to buy this as a portable setup I can take just about anywhere I want. Everything was functional for that purpose and works wonderfully. The light fixtures come with lights that aren't dimmable but adjustment of height and distance from the umbrella to the bulb can suffice. The carrying bag is fairly poor quality but it's kind of just a nice little extra you get with the package so I didn't take that to heart. The stand pieces, both for the backdrop and the lights, are fairly well made but if you aren't gentle they can be easily broken. As for the backdrops themselves, you get a white, black and green one; all of which are the expected colors and are decent material. However, if you intend to set these up indoors (or outdoors for that matter) be sure to have a background that is plain. These are not the thickest back drops and you can really see just about everything behind them if you aren't caring enough to have a plain backing. Overall, I am satisfied, but you shouldn't expect this to be the only kit you will ever need. Adequate for the beginner but once you really want to make a serious home studio, you will need something much more advanced.
I am helping a friend’s daughter with her wedding planning and want to make a backdrop like this for the wedding ceremony. Can you elaborate on how the strings of lights were plugged in and whether they all “hung” versus the string light hanging down and then looping back up, if that makes sense? I like the look of them just hanging but it seems like plugging a bunch of individual ones would be hard. Am I making this too complicated?!
This is the Meking background support system with a crossbar that telescopes from 77cm to 200cm. It can hold paper or cloth backgrounds to a maximum of almost 200cm.   Item features: Heavy duty 18mm,22mm and 25mm diameter tubes holds the heavy backdrop or drapes light background stand convenient for on-location work where portability is required The three legs spread out quickly and are freestanding Special locking system and the power clamp designed for stability and secure the backdrop usage   Item features: The lowest height of tripod: 77cm The highest height of tripod:200cm Crossbar length: 3 segments about 200cm Crossbar diameter:25mm.
Easy to assemble with a whole lot of party magic, our design-a-room sets take the term scene setters to another level. You can turn any space into an immersive party environment with our unique selection. Create unforgettable photo ops and completely transform your party space or venue with these disposable party backdrops. Host a safari with the jungle journey design-a-room background. A carnival backdrop banner kit puts the big tent right in your living room. Mardi Gras street scenes let you bring New Orleans to your guests, no matter where you actually live. The best part? These kits feature cutouts to put over the backdrops for a layered look.
×