When I received this it was folded down to 1'x6" package. After unfolding it, every fold line is very visible. Also the interior lights on top are part of the drop. This is an old time type of backdrop that depicts like a French street in late 1800 to early 1900 why there is a interior ceiling with lights on the top of this backdrop is in my opinion stupid. Also the seams should have been glued in a downward overlay application. Instead they are in a upward application which makes the top of the seam fold down exposing the white backside of the drop. Avoid. And by something that is actually cloth and not vinyl.
I purchased this for a Christmas party at my daughters school and it was a major hit with the kids and teachers! They set it up the evening before and on the day of the party I didn't notice any wrinkles. The props were so much fun and such a nice bonus! I was also pleasantly surprised by the quality - with the price being so affordable, I wasn't sure what to expect but it looked amazing and can be used for years to come.
The StudioPRO 3000W's included backdrops add a lot of value and a professional touch that users love. The 10-foot power cord often eliminates the need for an extension, and can reduce anxiety over tripping on a taut line. The lightweight equipment and small case store easily, and if you travel a lot, you would be hard-pressed to find a more portable model.
Great photography doesn’t always involve buying the most expensive camera on the market. Certainly, great cameras yield very good results. But even the best camera can’t perform to its best level without great lighting in the scene. Quite often, that great lighting will come from the sun with outdoor photos. However, when you have to shoot indoors, you need to provide your own lighting. Although you can produce this lighting with an on-camera flash unit, photography lighting sets provide the best quality of light. You also can make significant adjustments to the intensity and direction of light when using a set, giving you maximum control of the photo quality.
Users love the portable carrying bag, but some do note that it’s not heavy-duty or suitable for heavy fabrics. The ePhoto support stand kit is made of lightweight aluminum for portability, and you can adjust the height up to 8 ft. and the width to 10 ft. Another great thing about this product is that you can set it up in minutes, store it in the included carry bag and take it with you.
This is one of the best purchases I've made! I have a Talk Show and wanted good lighting and a place for my banner without spending hundreds of dollars. Well this was it! The stand where you hang your back drop, extends. It can go extremely wide or small enough to hang a small banner for an event. Same thing with the length. It can go as high as 6/7ft and as low as 2/3ft. Everything came new, nothing broke, everything worked. All four light stands can raise high or go low. For people using this for photography I strongly recommend getting some brighter light bulbs. This would be my only issue and recommendation. The bulbs are not bright enough at all. Its ok for the mean time or if you don't really need bright lights. It's amazing how this entire set up can be broken down quickly and all packed into a large, black, gym bag looking thingy that it comes in (of course inside the delivery box). I've had it for about a year and have taken it down atleast twice. My daughter and I put it back together when we moved in about 20 min or less. It comes with 4 light stands, 2 with umbrellas & 2 with the square light covers, 2 light covers, 1 backdrop stand, 3 sheets (black, green, white), 4 light bulbs, 3/4 clips for sheets & large black gym bag. Highly Recommend!
To start constructing this DIY backdrop, measure how thick your elbow is compared to your curtain rod, and add electrical tape around the end of the rod until you have a tight fit. For most people, it will be easier to put a little bit of tape on at a time, testing the fit every so often until it’s snug, but measurements can give you a good base to start with. Don’t attach the rod to the elbow yet, however.
Nice strong clamp. Seems well made for an inexpensive gadget. Very handy addition to the things you can mount a camera to when either you don't have a tripod or the tripod just won't work. I have not tried it with the SLR but should hold well unless the camera is quite large or with a long heavy lens. Probably best with P&S or the smaller SLR & lenses.
Overall I am very happy with this purchase. I wanted to get a decent lighting studio with backdrop without dropping a lot of cash in for now. I will say when ordering it I was very hesitant. I have found things that are priced cheap,are generally cheap quality. This I think was fair. Everything was in the bag, all lights worked, no bent poles, or broken lights. The fabric of the muslin is rather thin, but I had no problem with transparency on the white. My only complaints are that the bag's strap feels very frail in the stitching where it connects to the bag, which I can easily fix with a needle and thread, and the aluminum poles for the stands/poles are very light and tip with ease. I'm sure a few sandbags hanging would fix that though. Other than that I am very happy with my purchase. I have attached a photo from a quick shoot I did to test the kit out with my oldest husky. A good product for the price, and someone wanting to keep it cheap and simple for a while.
In summary, the key factors to getting the backdrop and subject lit in a similar exposure zone is distance; The distance of the subject to the background and the distance of the light source to the subject. Decrease the distance of the subject to background and increase the distance of the main light to the subject to make this easier. The key factor for getting a soft and directional quality to the light is also distance, but it's the opposite. By getting the light closer to the subject, we can create a softer light with more directional qualities. Also remember that these qualities of the light are relative to the size of the light source. If you are using a smaller light source, you will need to get it in closer to hold those transitional values. If you are using a larger light source, you may be able to get your light further back and still hold those soft-light qualities. Also, if the examples and basic principles here make sense to you, you have kind of just learned the inverse square law!
When it comes to special effect backgrounds, the chroma key backdrops are the most common used in tandem with special effects. The chroma key or key backgrounds are usually set to perfect blue or green helping a computer differentiate the background from the subject easily. This background can be used to superimpose a second image over the first one to show the chroma key color section.
Arrived damaged with small holes from the folds but I thought I could work with it. It is not wide enough for full frame, edged in white and printed so poorly that the design looks like it has a flaw. Look carefully at the seller's images. Several are photoshopped to appear better than the product. The last shot the seller uses shows a huge printing flaw. From a design standpoint, this makes no sense whatsoever to blow out that area with white. It isn't simulated light to give depth, it's just a flaw from the printer. Really, really bad photoshop to begin with in the first place, with other areas showing white artifacts on the design. China quality and standards. Not recommended unless you can shoot around them or photoshop them out later.
These lights worked perfectly for what I purchased them for - as part of the backdrop for my Christmas pictures. They are a great, long length and width and shine brightly, but they are not overpowering. I had no issues stringing them up at all. They have a steady on mode as well as several different blinking modes. My only complaint is that the plug did not fit into my standard outlet - it was very loose and kept sliding out, so I had to tape it in to use it. Also, there is no off switch, so these have to be unplugged when not in use. Like I said, though, they worked great for my intended purpose.
I recently bought this 3 days ago and used it to shoot 38 headshots and a group photo for a university. The images came out fantastic!! I was amazed that the light quality was excellent and the light stands were sturdy without sandbags to fasten it. I bought a used kit but it was greatly taken cared of. I wanted an easy portable light kit and this is perfect very light weight and cost effective. Backgroynd stand is great, Muslim is thin in black but just double it up and youll be fine for headshots.
Having skills in a variety of lighting techniques for your photo backdrop can give you some wonderful options for creating beautiful imagery for either products or portraits. By brushing up on your exposure and composition know-how along with practicing prior to your actual shoot date you’ll quickly be able to build a portfolio showing off your creative depth.
For gear, I used my Canon 50mm 1.4 lens. My camera settings for most of the shots you saw were f1.8, ISO 640 and shutter speed around 250. No flash. Just natural light. You really just need to play around with it a bit depending on your lighting situation and what not. Be brave and use that manual mode on your camera or at least the aperture priority setting. I did test shots using stuffed toys while the little guy was napping so as not to “waste” any precious time with him and risk missing any good shots. If you have older kids that will sit still you can get some really cool shots! If only Mr. C was old enough for an M&M bribe. Mr Moose did well though…. Here’s a test shot…..
Our full line of photo props and accessories will help you create the perfect portrait. From props that interact wonderfully with subjects to those that simply give your photos a little more interest. Our props are sure to help with creating magical photographs each and every time. Our realistic prop designs are often used in theatrical settings, special events, portraits, and even the motion picture industry.
Position these lights to point at the backdrop and use manual settings to achieve the “blown out highlights” effect. Make sure the light reading is at least 3 stops higher than the light on your subject. Light bounced off the blown-out background will also create a back-lighting effect on your subject, the degree of back-lighting depends on the angle at which background light are pointed at the background.
The fill light for this shoot is also a Profoto D1 1,000W strobe in a Westcott Apollo Orb, which is camera right and with the light sitting about waist height. This light is also pulled back a bit further than the main to give a wider spill. Since I am using my lights to do two jobs, lighting the subject and the background, I am not gridding and instead placing them so that one edge of the modifier is pointing towards the edge of the seamless and the other is towards the subject.
This was my first order with this product and I like it. The only thing that threw me off is that I expected it to be as pictured. Brick all as the 9x6 and the extra white on the bottom. It is in fact 9x6. I have included a couple test shots. The product works as expected. I love white back grounds. I think that this adds just a little bit of texture to them. Also important to not be right up against the backdrop. make sure that you get some distant between the subject and the back drop.
The Emart portable background support kit features adjustable crossbars, an aluminum alloy construction for portability and durability, heavy-duty spring clamps, and heavy-duty nylon sandbags. Another great thing about this product is that it comes with a bag so that you can take it with you on your trips. What’s more, you can adjust the height from 2.6 to 7 ft and the width from 5 to 10 ft.
Look no further! This is an awesome kit. I was very impressed with the weight and quality of the hardware. The poles are thick and sturdy, and it includes a brochure with basic instructions. The set comes with multiple bags: the large primary bag that holds everything, and smaller "set" bags (two for the umbrellas/softboxes and one for the back muslin stand). Overall I am very satisfied with this purchase and highly recommend this set. Also, the seller was great with communication.
Get an austere rustic look with Background Town’s Wall Yellow. It’s available in two materials. NewFab is a tear resistant “paper-like” substrate that’s wrinkle resistant and won’t reflect light. It’s sold in 3.9 x 5-foot and 5 x 6.8-foot sizes. NewFab backdrops won’t come with rod pockets and aren’t machine washable. If you need a backdrop with those attributes, spring for Background Town’s UltraCloth material, a machine-washable backdrop that’s wrinkle-free and has rod pockets sewn in. It’s sold in sizes ranging from 6 x 8 to 8 x 12 feet.
A 5 or 6-foot wide backdrop is a great size for headshots and ¾-length portraits. These backdrops are easy to manage and still only requires minimal space to set up. These backgrounds are ideal for event photographers who often work in busy spaces or for photographers working in a small home studio. While 5 to 6-foot backdrops offer more flexibility than 3.5-foot backdrops, they still become a bit tight if when photographing a couple or full-length portrait.