The backdrop support system typically mounts backdrops that feature a pole pocket. This pocket simply slides onto the cross bars. Backdrops without a pole pocket can also be mounted to the backdrop support system with spring clamps. Spring clamps (AKA A-Clamps) can be found at any hardware store and typically only cost a few dollars. These clamps are great to have around your studio, as they also allow you to clamp backdrops taut at the bottom to eliminate wrinkles or shadows.
The Julius Studio background curtain set features an aluminum alloy construction to ensure durability and portability, and photo clams made of synthetic nylon to provide a strong grip and prevent the canvas from slipping out. Another great thing is that it’s adjustable in width (5-10.3 ft) and height (2.6 -7.5 ft). In addition to this, the set includes quality sandbags for stability.

A traditional backdrop support system is the most common mounting solution for photography studios. The backdrop support system consists of a 3-section cross bar and two light stands. By utilizing two of the included cross bars, the backdrop support system can mount backdrops up to 7-feet wide. By utilizing all three cross bars, this system can mount backdrops up to 10.5-feet wide. The included  stands can extend up to 12-feet high for photographing tall people, high movement, or products.


With a 20 or 24-foot long backdrop you’ll be able to cover just about every style of portraiture and product photography. These backdrops are great if you want to photograph a larger family full-length, or have a video shoot that requires movement. These long backdrops are great for when you want to pull your subjects far from your backdrop as well.
Shooting on a clean white backdrop can be one of the more complex in-studio lighting setups around. Properly exposing for full lengths while giving your models room to work can require four or more extra lights and considerable amount of setup time. While taking the time to take care of the details is important for getting the perfect image and saving yourself hours of retouching on the back end, sometimes you just want to get a nice clean background without the hours of prep.
Drops & Props custom work is professional, high quality, and accurate. They were responsive to our needs and hustled to complete an order that had an impossibly tight turn around time. We ordered backdrops not only for our photo booth but to have a shared experience in every Etsy office across the globe. They made this happen for us and we are so grateful.

I was a little thrown off that it came folded up in an envelop, as this lead to some significant "creasing". However, I just laid the material flat, rolled it up and hung it vertically so gravity would pull the creases out. After a couple of days of hanging, it is pretty much wrinkle free. I had been a little concerned about other reviewers' comments about the image quality (digital printing) on the actual backdrop, but mine is perfectly fine. Again, my only "negative" is that the backdrop appears to have a greater "floor depth" than what I currently have.
The right camera lighting kit is the key to transforming mediocre photos and videos into quality memories or media. Photography light kits are not just for professional photographers any more thanks to the progression of technology and manufacturing that allows even beginners to have access to these photo game-changing tools. Whether you're a beginner looking for the right home studio lighting kit or a professional looking for new and used photography lighting kits for your business, eBay can help you find what you're looking for at a great price.
Nice strong clamp. Seems well made for an inexpensive gadget. Very handy addition to the things you can mount a camera to when either you don't have a tripod or the tripod just won't work. I have not tried it with the SLR but should hold well unless the camera is quite large or with a long heavy lens. Probably best with P&S or the smaller SLR & lenses.

I've purchased a few backdrops with this company (LB) now, and though I **HATE** the sizing of their backdrops (way too short and not wide enough), the quality of them are so good for the price. This one is versatile in my opinion: we used it for a murder mystery party that took place in ancient China (oh yeah!), but I've seen pictures of people using this as a studio backup for couple pictures and so forth. I think it's a fun one that deserves to be purchased more often.


The Little Studio System is a must-have backdrop solution for photographing newborns, infants, toddlers, pets, and products.  The Little Studio is essentially a 3.5 x 3.5 x 3.5-foot room in a box. This system is completely collapsible and can be paired with hundreds of available backdrops and floordrops. These backdrops attach to the system with Velcro, allowing for instant set changes and clean up.
I love this backdrop for photos; I used it for my daughters pictures to use on her first birthday card. However, as other reviewers stated, getting the creases out is nearly impossible. I took another persons idea of wrapping it around a pole (one of those long, skinny paint rollers meant for painting ceilings - so very skinny). I wrapped it around the pole and used tape to hold it in place for TWO WEEKS. While it helped with the creases a little bit, they were still pretty visible. I would love to purchase more of these for future use but am hesitant; I wish the supplier would ship them rolled in tubes as opposed to folding them.
To start constructing this DIY backdrop, measure how thick your elbow is compared to your curtain rod, and add electrical tape around the end of the rod until you have a tight fit. For most people, it will be easier to put a little bit of tape on at a time, testing the fit every so often until it’s snug, but measurements can give you a good base to start with. Don’t attach the rod to the elbow yet, however.
I ordered this backdrop, because I've been recently getting into some basic photography and needed a backdrop in a standard, simple color. Please note that included with your purchase is ONLY the backdrop and clamps for it. The stand is sold separately. It came shipped to me in a smaller flat box. The backdrop itself was wrapped in a cellophane bag inside the box. The five spring clamps were in a smaller cellophane bag inside the box as well. The clamps were very good quality-they stayed closed without any slipping. The stitching and fabric quality looked very good, especially for the price. It's not thick enough to completely block out any light behind so be prepared to plan accordingly. It is not too thin either though in my opinion. The thinner material makes for easier storage. And yes it does have wrinkles when you unfold it, but that is easy ... full review
I was a little thrown off that it came folded up in an envelop, as this lead to some significant "creasing". However, I just laid the material flat, rolled it up and hung it vertically so gravity would pull the creases out. After a couple of days of hanging, it is pretty much wrinkle free. I had been a little concerned about other reviewers' comments about the image quality (digital printing) on the actual backdrop, but mine is perfectly fine. Again, my only "negative" is that the backdrop appears to have a greater "floor depth" than what I currently have.

For gear, I used my Canon 50mm 1.4 lens. My camera settings for most of the shots you saw were f1.8,  ISO 640 and shutter speed around 250. No flash. Just natural light. You really just need to play around with it a bit depending on your lighting situation and what not.  Be brave and use that manual mode on your camera or at least the aperture priority setting. I did test shots using stuffed toys while the little guy was napping so as not to “waste” any precious time with him and risk missing any good shots. If you have older kids that will sit still you can get some really cool shots! If only Mr. C was old enough for an M&M bribe. Mr Moose did well though…. Here’s a test shot…..


For a dramatic or edgy appearance, go with low-key lighting. Low-key lighting also focuses attention onto your subject by surrounding them in shadows instead of light. To do this, you want to ensure that your solid black backdrop is at least 3 stops darker than the light on your subject. With low-key lighting, you also need to ensure that none of the light from your subject is hitting your backdrop. Grids and flag are very helpful for this.
They are plastic, but very strong and the clamping power is quite good. The only annoyance is the little red pads on the end, swivel all the way around so if you are trying to attach something up high with one hand, sometimes they flip backwards and don't grab correctly. You just need to make sure they are facing inwards before you reach up high. I used all 6 clamps to attach a large king size sheet to a linco backdrop stand and it was enough - ... full review

Users love the price and the quality of the product, but some do note that it’s too light for their liking. The Linco T-shaped backdrop stand features a sturdy design, a set of crossbars, and clamps to keep the fabric in place. Another great thing about this product is that it’s light – just four lbs., and you don’t need any special skills to assemble it. What’s more, you can adjust it from 2.6 ft. to 6.7 ft. 
Backdrops tend to be at the center of your event, whether it's a photo booth backdrop, standard photography, or a tradeshow booth. They bring life, charm, and enjoyment to your subjects. With a photo booth in particular, your customers get to play. So...they're necessary. With over 500 hundred to choose from (and the option to custom-design your own), PB Backdrops has you covered.
I was a little thrown off that it came folded up in an envelop, as this lead to some significant "creasing". However, I just laid the material flat, rolled it up and hung it vertically so gravity would pull the creases out. After a couple of days of hanging, it is pretty much wrinkle free. I had been a little concerned about other reviewers' comments about the image quality (digital printing) on the actual backdrop, but mine is perfectly fine. Again, my only "negative" is that the backdrop appears to have a greater "floor depth" than what I currently have.
I love this backdrop for photos; I used it for my daughters pictures to use on her first birthday card. However, as other reviewers stated, getting the creases out is nearly impossible. I took another persons idea of wrapping it around a pole (one of those long, skinny paint rollers meant for painting ceilings - so very skinny). I wrapped it around the pole and used tape to hold it in place for TWO WEEKS. While it helped with the creases a little bit, they were still pretty visible. I would love to purchase more of these for future use but am hesitant; I wish the supplier would ship them rolled in tubes as opposed to folding them.
ALL backdrops/floordrops found in our "NEW Design Arrivals" section are *ON SALE* for 30% off now through Sunday night. Shop here: http://www.backdropsandfloors.com/NEW-Design-Arrivals_c_221.html Enter coupon code: "newarrival" at checkout ----------------------------------------------------------- Sale rules can be found in the shopping cart before checkout.
We’ve warned photographers before about the very real danger (not to mention illegality) of photographing on railroad tracks. With Backdrop Outlet’s Western Steam Train backdrop, you’ll get all of the folksy wanderlust of a track shoot without the immense risk. Like other backdrops in the company’s Western collection, the Steam Train is available in sizes ranging from 5 x 6 feet to 10 x 20 feet, depending on your backdrop material. You’ll have a number of different materials to choose from, including Baby Drops, which is a heavy matte vinyl; Candy Drops, printed on a thin nylon-polyester material; and Candy Stick, a film-backed drop that can be stuck to a wall and peeled off for reuse up to 15 times. If you need something larger, the company’s Platinum is a wrinkle-free fabric that is washer- and dryer-safe.

This is my first DIY project. I decided to make this backdrop stand so when I film my YouTube videos. I bought all of the products used from my local Home Depot. I bought three 10 feet long PCV pipes. 4 end caps, 4 T-caps and 2 Elbow Caps. I had a Home Depot Employee cut the PCV pipe for me in store. The 1st PCV was cut in TWO 54 inch long pieces. The 2nd PCV pipe was cut into FOUR 30 inch long pieces. The 3rd PCV pipe was cut into FOUR 12 inch long pieces. I got this idea from Pinterest and I found it very helpful. I spent $10.23 total, including tax, and it took me less than 10 minutes to construct this project. This is great for Vlogging, low-budget photography studios or even a photo-booth at an or birthday party!
Like other photo backdrop materials, polyester also comes in various sizes and colors. An advantage of this fabric is that it’s wrinkle-free. If there are heavy wrinkles, it can easily be removed by warm ironing from the back or by steam ironing it when it’s hung. It also includes rod holes that are perfect for hanging, especially if you don’t have a place to store it after using.
×