What can I say? This background is flimsy and cheap and you can see right through it and it's packed folded and the creases never come out. It arrived with a few runs which is frustrating but you get what you pay for. All of that being said, under the right conditions the backdrop does photograph well, if you know what your doing. Shallow DOF and creative lighting and it did what it was needed for, which in my case was a quick set up for a baby holiday portrait.
This is an 10ft*10 ft (300cm*300cm) spring backdrop with general appearance of a picture, there is a floor for person to stand on, and not seamless, mean it's two pieces backdrops. Backgrounds are suitable for Wedding, Children Photography, Holiday Party, Birthday or Photo Booths etc. If you need size that larger than 150 cm*200 cm, please contact us and additional charges is needed, also large size backgrounds have seams, please don't worry because the seam will not interfere with the photos. For any questions and problems please feel free to contact with me, I will do my best to answer and help you.
These lights worked perfectly for what I purchased them for - as part of the backdrop for my Christmas pictures. They are a great, long length and width and shine brightly, but they are not overpowering. I had no issues stringing them up at all. They have a steady on mode as well as several different blinking modes. My only complaint is that the plug did not fit into my standard outlet - it was very loose and kept sliding out, so I had to tape it in to use it. Also, there is no off switch, so these have to be unplugged when not in use. Like I said, though, they worked great for my intended purpose.
Though I had an idea for the DIY photo booth backdrop a long time ago, it took awhile for me and my fiance to get around to constructing it. We decided we wanted a backdrop with a sheer white curtain and bright string lights. We settled on the string lights because of their warm vibe. Plus, we thought they tied in nicely with our loosely light-themed wedding.
Though I had an idea for the DIY photo booth backdrop a long time ago, it took awhile for me and my fiance to get around to constructing it. We decided we wanted a backdrop with a sheer white curtain and bright string lights. We settled on the string lights because of their warm vibe. Plus, we thought they tied in nicely with our loosely light-themed wedding.
This is my first DIY project. I decided to make this backdrop stand so when I film my YouTube videos. I bought all of the products used from my local Home Depot. I bought three 10 feet long PCV pipes. 4 end caps, 4 T-caps and 2 Elbow Caps. I had a Home Depot Employee cut the PCV pipe for me in store. The 1st PCV was cut in TWO 54 inch long pieces. The 2nd PCV pipe was cut into FOUR 30 inch long pieces. The 3rd PCV pipe was cut into FOUR 12 inch long pieces. I got this idea from Pinterest and I found it very helpful. I spent $10.23 total, including tax, and it took me less than 10 minutes to construct this project. This is great for Vlogging, low-budget photography studios or even a photo-booth at an or birthday party!
The backdrops not high definition, will some blurred,so need distance to take pictures. Also many large format images may seem a little pixelated when you view it up close but I make sure that only suitable images are used for the drops to provide the most realistic look possible.Please keep in mind that all computer screens vary in color calibration.
Backdrops and backgrounds have become indispensable to the photo booth and tradeshow experience as well as to so many other events. Does that mean you need one? Absolutely. And PB Backdrops has just the right one for you. With one of the largest selections anywhere, you can make your choice from pillow cover tension fabrics or single-sided tensions, all of which are custom printed  with hundreds of themes, or you can select from specific styles including rosette and mermaid.
The backdrop support system typically mounts backdrops that feature a pole pocket. This pocket simply slides onto the cross bars. Backdrops without a pole pocket can also be mounted to the backdrop support system with spring clamps. Spring clamps (AKA A-Clamps) can be found at any hardware store and typically only cost a few dollars. These clamps are great to have around your studio, as they also allow you to clamp backdrops taut at the bottom to eliminate wrinkles or shadows.
You can channel our cavemen ancestry with Custom Photo Prop’s Faux Fur Mat, safe in the knowledge that no animals were harmed in their making. These synthetic mats are PETA-approved, machine-washable and hypoallergenic. They can be ordered as a basket stuffer in a 20 x 32-inch size. It’s sold as a 15 x 15-inch layer or in 3 x 5-foot and 5 x 6-foot sizes. They’re super comfortable on baby’s skin as well.
The idea is to hang this backdrop so that some of the floor print is actually hanging up off the floor and this works very well. The full-length photo shows this way of hanging the backdrop. However, it also works very well if you just hang the backdrop so that the brick is straight up and the floor print is on the floor. The creases from the item being folded are not avoidable, but I did not do a thing to try to remove them and, as you can see, they did not cause any problems in these photos. I am very careful to fold the backdrop when I'm done with it on exactly the same creases so as not cause any further creases or wrinkles. It's easy to do, but a large floor area is very helpful when folding. The smaller sized one might be a better option if you shooting only single subjects. I bought the LimoStudio backdrop frame LimoStudio Photo Video Studio Adjustable Muslin Background Backdrop Support System Stand & Cross Bar, AGG1111and the two together are awesome. I truly love this product!
This is my first DIY project. I decided to make this backdrop stand so when I film my YouTube videos. I bought all of the products used from my local Home Depot. I bought three 10 feet long PCV pipes. 4 end caps, 4 T-caps and 2 Elbow Caps. I had a Home Depot Employee cut the PCV pipe for me in store. The 1st PCV was cut in TWO 54 inch long pieces. The 2nd PCV pipe was cut into FOUR 30 inch long pieces. The 3rd PCV pipe was cut into FOUR 12 inch long pieces. I got this idea from Pinterest and I found it very helpful. I spent $10.23 total, including tax, and it took me less than 10 minutes to construct this project. This is great for Vlogging, low-budget photography studios or even a photo-booth at an or birthday party!
Among a raft of new products, Denny’s Fair Tale Trail puts your subject in a whimsical (dare we say Hobbit-esque) setting. The backdrop is available in your choice of three materials: Freedom Cloth, which is a wrinkle-free polyster that’s washable and dryer safe; Twist Flex, which uses the Freedom Cloth material but mounts it to a wire frame that can be folded down tight if you envision travelling a lot with the backdrop. Lastly, it’s available in canvas, which is a more delicate backdrop that ships with a wood mounting and Velcro straps. Sizes vary with Freedom Cloth, giving you the widest selection of size options.
If you're looking for photography backdrops suitable for outdoor or portable use, collapsible backgrounds are both economical and space-efficient choices. Many fold down to a third of their size, and come with convenient carrying bags so you have room to pack and protect multiple backgrounds. Several styles feature reversible designs, to give clients a choice of colors and patterns. Pastel pink and blue backgrounds work well for baby showers. Urban-inspired prints let kids and teens show off their more expressive side. You'll also find options in camera-ready, chroma-key colors suitable for special effects projects.
×