These are better than I expected. Good solid build. Takes about a good solid hour to assemble everything. Everything worked perfectly after assembly. No sand for the sandbag, so I put a bottle of water in the pouch. Worked perfect as a counterweight. I live in a one bedroom apartment, so I put two of the lights away after testing and keep one assembled for impulse shoots.
A good beginner, entry-level, infrequent use backdrop. If you take the time to remove the wrinkles, and there are quite a few due to shipping restrictions, it turns out to be a good first backdrop. I rolled it tightly on a 1” pvc, leaving it that way for several days, and hung it afterwards. There were a few places I needed to use a hair dryer to get them out but once done it’s a nice backdrop. It’s lightweight being vinyl but the printing on it looks much richer. For the price you know you will need to do some work but in the end it’s well worth it.
Vinyl backdrops are thick, rolled and durable, and are recommended for professional studio work. They generally come in solids, but there are a few with printed patterns that can be very inexpensive. While most vinyl backgrounds have a glossy sheen, there are some (including a recently announced line by Savage, which includes the Savage Matte Finish Gray Infinity Series vinyl background) that have a matte finish to eliminate glare and reflections.
This was a great value for the price. The backdrops photograph well, the lights are great and the stand is good. The stand didn't come with instructions to put it together, but wasn't too difficult to figure out. The backdrops did come with some wrinkles from being folded for shipping, but I have them rolled up together on a wrapping paper roll and they seem to be much better (and I haven't even ironed them yet.) I would recommend this product, especially for beginners like myself.
Great backdrop! I had been looking for a hand painted backdrop but had found that most of them were far too expensive for my budget. Some of the more expensive backdrops also appeared to have far too many design and color variations for my needs. This backdrop is excellent quality and the color is perfect! The slight variations between dark and light gray look lovely in my images.
A traditional backdrop support system is the most common mounting solution for photography studios. The backdrop support system consists of a 3-section cross bar and two light stands. By utilizing two of the included cross bars, the backdrop support system can mount backdrops up to 7-feet wide. By utilizing all three cross bars, this system can mount backdrops up to 10.5-feet wide. The included stands can extend up to 12-feet high for photographing tall people, high movement, or products.
To start constructing this DIY backdrop, measure how thick your elbow is compared to your curtain rod, and add electrical tape around the end of the rod until you have a tight fit. For most people, it will be easier to put a little bit of tape on at a time, testing the fit every so often until it’s snug, but measurements can give you a good base to start with. Don’t attach the rod to the elbow yet, however.
As I expected with cotton it came quite wrinkled, but as any cotton the wrinkles come out well. Of course, ironing requires work and on such large piece of fabric it took about 15 minutes. Cotton will wrinkle again if it is folded for storage, so ideally it would be best to store it mounted on the stands, but for me it is not possible due to lack of space. So I expect that I will need to iron it again, but hopefully it will take less time compared to the initial ironing as I packed it less tightly. Steam ironing works best. For a large piece of fabric like this I use a separate bottle to spray mist on ... full review
Anyone that does any kind of handy work around the house (or anywhere for that matter) definitely needs to keep a few of these on hand. They are simple. They are plastic, but they feel very strong. The spring inside is REALLY strong! It's got a tight grip for sure! I have around 40-50 of these (different brands) that I've acquired over the years doing woodworking projects. These rank right up there with the best ones! If you're gluing something, these are a must to clamp the parts together. Great grip and as inexpensive as you're going to find! (currently $9.99/1.67ea). Hard to argue with that!
I would definitely play around with it. Your not going to want to go too wide with 4 because odds are they will move around a bit and you’ll end up with some soft faces. Some key things to remember would be try to keep their faces all on the same plane of focus, that will allow you to shoot a little wider. Generally with 4 kids I would aim to shoot around f/4 but certainly play around. At that aperture you may want to consider moving them further away from the background. Keep in mind the closer you are to them and the further away from the background they are the more bokeh you will get!
Buyer beware!! Fell apart after 1 use :( The plastic pieces separate from the poles. The adjustment valve on one side is completely stuck so I cannot adjust sizing. Seller dismissed my contact...I'd honestly just like to exchange for hopefully one that is not defective but seller in not responding. Very disappointed in this purchase. I buy from Amazon very often and this has been my first issue with low quality merchandise.
This kind of fabric has an amazing quality that absorbs light from flashes around the studio. It enables you to have a pitch-black (if using black velour) portrait background that will not reflect the light from your flash or lighting equipment. This way, you don’t have to worry about the direction of light affecting the background because it leaves no detail.