A good beginner, entry-level, infrequent use backdrop. If you take the time to remove the wrinkles, and there are quite a few due to shipping restrictions, it turns out to be a good first backdrop. I rolled it tightly on a 1” pvc, leaving it that way for several days, and hung it afterwards. There were a few places I needed to use a hair dryer to get them out but once done it’s a nice backdrop. It’s lightweight being vinyl but the printing on it looks much richer. For the price you know you will need to do some work but in the end it’s well worth it.
Though I had an idea for the DIY photo booth backdrop a long time ago, it took awhile for me and my fiance to get around to constructing it. We decided we wanted a backdrop with a sheer white curtain and bright string lights. We settled on the string lights because of their warm vibe. Plus, we thought they tied in nicely with our loosely light-themed wedding.
This was a great value for the price. The backdrops photograph well, the lights are great and the stand is good. The stand didn't come with instructions to put it together, but wasn't too difficult to figure out. The backdrops did come with some wrinkles from being folded for shipping, but I have them rolled up together on a wrapping paper roll and they seem to be much better (and I haven't even ironed them yet.) I would recommend this product, especially for beginners like myself.
This was my first order with this product and I like it. The only thing that threw me off is that I expected it to be as pictured. Brick all as the 9x6 and the extra white on the bottom. It is in fact 9x6. I have included a couple test shots. The product works as expected. I love white back grounds. I think that this adds just a little bit of texture to them. Also important to not be right up against the backdrop. make sure that you get some distant between the subject and the back drop.
Summer may be drawing to a close soon, but ice cream is everyone’s year-round fave. Unlike the real stuff, Ink & Elm’s Dip n Dots backdrop won’t melt on you and its matte vinyl is tear resistant, so you can use it as a floor drop, too. It’s water resistant in case some real ice cream spills from your subject’s hands (or yours, we’re not judging). You can order the backdrop with grommets along the top for an extra $8, or spend $15 to get a pole pocket along the top. Sizes range from 3 x 2 feet up to 10 x 6 feet. Yum.
For our session I tried to keep Mr. C about 3/4 of the way up from the lights on the wall and towards me (right around where you are seeing the garland and red ornaments in the above photo). I was sitting only as far back from him as I had to, to get what I wanted of him in the frame (keeping in mind the three criteria above). Using the garland and ornaments for props helped because he just played with them wherever I set them down.
Any photo op is just as exciting as the party itself with our unique photo booth props. Stick props that include everything from emojis to silly monsters to zoo animals? Check. Costume accessories that you can wear and share like hats, masks and glasses? Yep, we got 'em. Novelty jewelry in every color and style? You better believe it! Set all of these fun finds out next to your DIY photo booth for guests to grab as the prepare to pose. Best of all, they double as take home party favors once the celebration wraps.
Having skills in a variety of lighting techniques for your photo backdrop can give you some wonderful options for creating beautiful imagery for either products or portraits. By brushing up on your exposure and composition know-how along with practicing prior to your actual shoot date you’ll quickly be able to build a portfolio showing off your creative depth.
A traditional backdrop support system is the most common mounting solution for photography studios. The backdrop support system consists of a 3-section cross bar and two light stands. By utilizing two of the included cross bars, the backdrop support system can mount backdrops up to 7-feet wide. By utilizing all three cross bars, this system can mount backdrops up to 10.5-feet wide. The included stands can extend up to 12-feet high for photographing tall people, high movement, or products.
Chromakey gives you the ability to insert your photography client into a background of your choosing by having them pose in front of a vibrantly colored screen. You can do this in post-processing programs by removing and replacing the chromakeyed color with the background of your choosing. While you can technically chromakey any color, opting for a very exaggerated color, neon green or blue, will reduce the chance of your client accidentally looking like a floating head without a body because you chromakeyed the color of their dress.
Among a raft of new products, Denny’s Fair Tale Trail puts your subject in a whimsical (dare we say Hobbit-esque) setting. The backdrop is available in your choice of three materials: Freedom Cloth, which is a wrinkle-free polyster that’s washable and dryer safe; Twist Flex, which uses the Freedom Cloth material but mounts it to a wire frame that can be folded down tight if you envision travelling a lot with the backdrop. Lastly, it’s available in canvas, which is a more delicate backdrop that ships with a wood mounting and Velcro straps. Sizes vary with Freedom Cloth, giving you the widest selection of size options.
So why only 4 stars and not 5? I personally don't like the very top of the backdrop. If you look at the pictures carefully (I don't know if you can actually see this because I tried to crop these out), it looks like there are ceiling lights on a dark alley street. Scientifically, that's impossible and realistically, it looks WEIRD. But other than that, it's near perfect for what you're paying for.
This is my first DIY project. I decided to make this backdrop stand so when I film my YouTube videos. I bought all of the products used from my local Home Depot. I bought three 10 feet long PCV pipes. 4 end caps, 4 T-caps and 2 Elbow Caps. I had a Home Depot Employee cut the PCV pipe for me in store. The 1st PCV was cut in TWO 54 inch long pieces. The 2nd PCV pipe was cut into FOUR 30 inch long pieces. The 3rd PCV pipe was cut into FOUR 12 inch long pieces. I got this idea from Pinterest and I found it very helpful. I spent $10.23 total, including tax, and it took me less than 10 minutes to construct this project. This is great for Vlogging, low-budget photography studios or even a photo-booth at an or birthday party!
Cheryl Woods is an accomplished photographer, designer and branding consultant with a career spanning 20+ years. Her photographic work includes editorial, fashion, portraiture and product photography for major companies in the consumer products field including QVC and Hanover Direct. She received a B.F.A. in Photography from the University of the Arts and an M.F.A. in Media Design from Full Sail University. Cheryl's work has been exhibited at the Lowes Museum of Art in Coral Gables, FL, The New York Independent Film Festival and the Rosenwald Wolf Gallery in Philadelphia, PA. Check out her website here!
This Studio portrait umbrella Kit is easy to use and setup. These lights work great with digital cameras. It is ideal for all level photographers. It is a complete kit with a complete background supporting system with case. 3 section cross bar open up to 9ft and 8ft height. THREE 6' x 9' muslin backdrop(black, white and green) and a continuous lighting umbrellas kit.
This kind of fabric has an amazing quality that absorbs light from flashes around the studio. It enables you to have a pitch-black (if using black velour) portrait background that will not reflect the light from your flash or lighting equipment. This way, you don’t have to worry about the direction of light affecting the background because it leaves no detail.
The package arrived in a Manila folder therefore had lot of creases. I follow the instructions and ironed it and as you can see in the photos the creases diminished greatly. My husband made a 2x4 frame for it with wood already available as we do no have a photographer stand. It came out lovely. I can’t wait for the final result as the date arrives. Well worth the money! Not the greatest quality of material but it’s also not bad for what’s intended for.
In summary, the key factors to getting the backdrop and subject lit in a similar exposure zone is distance; The distance of the subject to the background and the distance of the light source to the subject. Decrease the distance of the subject to background and increase the distance of the main light to the subject to make this easier. The key factor for getting a soft and directional quality to the light is also distance, but it's the opposite. By getting the light closer to the subject, we can create a softer light with more directional qualities. Also remember that these qualities of the light are relative to the size of the light source. If you are using a smaller light source, you will need to get it in closer to hold those transitional values. If you are using a larger light source, you may be able to get your light further back and still hold those soft-light qualities. Also, if the examples and basic principles here make sense to you, you have kind of just learned the inverse square law!
One of the advantages of using a chroma key background is that it can shorten production time by doing away with the need to change from one background to another. This kind of photo backdrop allows the photographer to freely take pictures without thinking of what background will best fit the image, as they can decide on that part later in the post-processing stage.