For gear, I used my Canon 50mm 1.4 lens. My camera settings for most of the shots you saw were f1.8,  ISO 640 and shutter speed around 250. No flash. Just natural light. You really just need to play around with it a bit depending on your lighting situation and what not.  Be brave and use that manual mode on your camera or at least the aperture priority setting. I did test shots using stuffed toys while the little guy was napping so as not to “waste” any precious time with him and risk missing any good shots. If you have older kids that will sit still you can get some really cool shots! If only Mr. C was old enough for an M&M bribe. Mr Moose did well though…. Here’s a test shot…..
I just received this in the mail. It does smell a little like oil based paint, but you have to put your nose up to the fabric. The white and gray is what I ordered so alternating contrast is to be expected. First thing I did was throw it in a dryer with a wet towel to remove the creases and randomize the wrinkles. It's a backdrop of the same quality as the all black backdrop. I expect to be using it in a maternity shoot this weekend and I think it will be wonderful. What I ordered and what I expected. It isn't heavy which makes it portable for other locations, but it means it may not be what some people expect. I'm happy and looking forward to a lot of use. I think it will work for what ... full review
I love this backdrop for photos; I used it for my daughters pictures to use on her first birthday card. However, as other reviewers stated, getting the creases out is nearly impossible. I took another persons idea of wrapping it around a pole (one of those long, skinny paint rollers meant for painting ceilings - so very skinny). I wrapped it around the pole and used tape to hold it in place for TWO WEEKS. While it helped with the creases a little bit, they were still pretty visible. I would love to purchase more of these for future use but am hesitant; I wish the supplier would ship them rolled in tubes as opposed to folding them.
A traditional backdrop support system is the most common mounting solution for photography studios. The backdrop support system consists of a 3-section cross bar and two light stands. By utilizing two of the included cross bars, the backdrop support system can mount backdrops up to 7-feet wide. By utilizing all three cross bars, this system can mount backdrops up to 10.5-feet wide. The included  stands can extend up to 12-feet high for photographing tall people, high movement, or products.
I love this backdrop for photos; I used it for my daughters pictures to use on her first birthday card. However, as other reviewers stated, getting the creases out is nearly impossible. I took another persons idea of wrapping it around a pole (one of those long, skinny paint rollers meant for painting ceilings - so very skinny). I wrapped it around the pole and used tape to hold it in place for TWO WEEKS. While it helped with the creases a little bit, they were still pretty visible. I would love to purchase more of these for future use but am hesitant; I wish the supplier would ship them rolled in tubes as opposed to folding them.
The key to getting those gorgeous big bubbles of light in the background is to locate your subject a decent distance from the lights while at the same time positioning yourself as close to your subject as you can be to get the shot you want and setting the aperture on your camera just about as wide open as you can. The further away your subject is from the lights, the closer your are to your subject and the wider the aperture…..the bigger the lights.
These lights worked perfectly for what I purchased them for - as part of the backdrop for my Christmas pictures. They are a great, long length and width and shine brightly, but they are not overpowering. I had no issues stringing them up at all. They have a steady on mode as well as several different blinking modes. My only complaint is that the plug did not fit into my standard outlet - it was very loose and kept sliding out, so I had to tape it in to use it. Also, there is no off switch, so these have to be unplugged when not in use. Like I said, though, they worked great for my intended purpose.
Features: 1.5-In-1 Design: Fill-in light ring, Bluetooth shutter, Selfie Stick, Phone Holder, Tripod Lamp 2.Wide Application: Widely applied to podcast, live video, video chat, selfie fill light, makeup, filling light indoors, portrait, fashion, wedding art, advertisement photography, etc.3.With Controller: Brightness up and down(10-level brightness), light color switching and power on/off easily handled through the controller 4.3-Light Color: Warm Light, Soft Light, White light. Different light color delivers differetn shooting results. 5.Eye Protection Light Source: Soft light photography light with stepless dimming, can be adjusted to your desired level. 6.Designed to Last: High quality led bead equipepd, flicker-free, no light ra.
Made from styrene, a wrinkle-free plastic, this versatile backdrop can be used as a light table, prop setup or a seamless background. Props or people on the other side of the backdrop are seen as shapes and eerie silhouettes. Placed in front of a light, it delivers a frosted glass effect. You can cut Translum with scissors, so you can whittle down a roll into any shape you desire. It’s available in three grades: lightweight, for a soft light effect with a 3/4-stop light loss, medium grade that eliminates most of the shadows and delivers a 1.5-stop light loss and a heavy grade that knocks back two stops of light (this grade is recommended for shooting tables and is cleanable). Medium and lightweight grades are sold in 60-inch x 18-foot rolls while the heavyweight grade is available in 54-inch x 18-foot rolls.

In the shot above I used a two light setup. The main light, camera left, is a Profoto D1 1,000Ws head inside of a 50 inch Westcott Apollo Softbox. While the idea of mixing what is considered to be a high-end strobe with a budget softbox my not sit right with some, I find the indirect lighting source from a Westcott or Photek to give a really nice and even light. The 60 inch Photek Softlighter, which I also enjoy using, may only cost $95 but gives a really nice, soft, and even light. If these lower cost indirect sources are good enough for the likes of Mario Testino and Annie Leibovitz, then they are good enough for me. Clay Cook did an great article on these lighting sources, "Lighting Like Leibovitz," that you can find here.
Look no further! This is an awesome kit. I was very impressed with the weight and quality of the hardware. The poles are thick and sturdy, and it includes a brochure with basic instructions. The set comes with multiple bags: the large primary bag that holds everything, and smaller "set" bags (two for the umbrellas/softboxes and one for the back muslin stand). Overall I am very satisfied with this purchase and highly recommend this set. Also, the seller was great with communication.
Having skills in a variety of lighting techniques for your photo backdrop can give you some wonderful options for creating beautiful imagery for either products or portraits. By brushing up on your exposure and composition know-how along with practicing prior to your actual shoot date you’ll quickly be able to build a portfolio showing off your creative depth.
Important Disclaimer: The information contained on Top5Reviewed.com is intended for informational and educational purposes only. Any statements made on this website have not been evaluated by the FDA and any information or products discussed are not intended to diagnose, cure, treat or prevent any disease or illness. Please consult a healthcare practitioner before making changes to your diet or taking supplements that may interfere with medications.
This kit is truly jaw dropping. First of all, the quality of all of the products are amazing. The fabrics on the backdrops is professional level and the quality of the fabric of the soft boxes is even better. the lights are really strong and bright but the soft boxes make it... softer. The Background support is really sturdy and it is something that you can rely on. The reflectors comes in handy if you are one of those people who like to use it. Every product comes with well packaged and most come with a carry bag which is very nice. The second thing that is that the price is unbelievable. It comes with 4 lights, three different backdrops and all of the metal pieces! YOU WON"T FIND A BETTER DEAL! This is a great product for the professional photographer or for those starting out and want to have ... full review
Made from styrene, a wrinkle-free plastic, this versatile backdrop can be used as a light table, prop setup or a seamless background. Props or people on the other side of the backdrop are seen as shapes and eerie silhouettes. Placed in front of a light, it delivers a frosted glass effect. You can cut Translum with scissors, so you can whittle down a roll into any shape you desire. It’s available in three grades: lightweight, for a soft light effect with a 3/4-stop light loss, medium grade that eliminates most of the shadows and delivers a 1.5-stop light loss and a heavy grade that knocks back two stops of light (this grade is recommended for shooting tables and is cleanable). Medium and lightweight grades are sold in 60-inch x 18-foot rolls while the heavyweight grade is available in 54-inch x 18-foot rolls.
I was really excited to get this backdrop for my new YouTube channel (Nia Knows Best) and it did not fail. The quality is thick (which is good), and it is NOT transparent. That's perfect because I have a wall of magazine pictures behind this backdrop and yet you can't see anything but the shimmer of the rose gold glitter. The only thing I would say is that depending on the lighting the rose gold turns into a silver ish glitter which can be a little frustrating. In the last photo you can see how just because of the lighting switching, the rose gold turns into silver. Other than that it is perfect.
If you’d like to do a little further reading,  here are a couple of links to tutorials that I found helpful before trying this myself. Prop Insanity has a great one with pictures of their actual studio set up using this type of background and Digitial Photography School has a great article on How to Take Beautiful Bokeh Christmas Images . (Bokeh being that gorgeous background blur we all love). You can also check out my Photography board on pinterest for more ideas.  If you do try this, I would LOVE to see your finished product so please come share with us on Facebook.

I ordered this backdrop, because I've been recently getting into some basic photography and needed a backdrop in a standard, simple color. Please note that included with your purchase is ONLY the backdrop and clamps for it. The stand is sold separately. It came shipped to me in a smaller flat box. The backdrop itself was wrapped in a cellophane bag inside the box. The five spring clamps were in a smaller cellophane bag inside the box as well. The clamps were very good quality-they stayed closed without any slipping. The stitching and fabric quality looked very good, especially for the price. It's not thick enough to completely block out any light behind so be prepared to plan accordingly. It is not too thin either though in my opinion. The thinner material makes for easier storage. And yes it does have wrinkles when you unfold it, but that is easy ... full review
The Emart portable background support kit features adjustable crossbars, an aluminum alloy construction for portability and durability, heavy-duty spring clamps, and heavy-duty nylon sandbags. Another great thing about this product is that it comes with a bag so that you can take it with you on your trips. What’s more, you can adjust the height from 2.6 to 7 ft and the width from 5 to 10 ft.
You don’t have to browse Instagram long before you see images of people in dangerous places. You can satisfy the thrill-seeking selfie shooter with PhotoPie’s vertigo-inducing Bird’s Eye View floor mat. The bottom is made of non-slip rubber that will stay in place once it’s on the floor. The top material is felt and is imaged using a fade-resistant dye-sublimation process. Sizes range from 4 x 5 to 8 x 10 feet. 
A purchaser comments that the adjustable backdrop stand is sturdy enough to do the job and that it’s easy to put it together. He adds that it’s light and easy to transport and that he highly recommends it to anyone looking for portable background stands. Another reviewer shares that he bought three adjustable support frames and that he is pleased with the construction and the stability.
Shooting on a clean white backdrop can be one of the more complex in-studio lighting setups around. Properly exposing for full lengths while giving your models room to work can require four or more extra lights and considerable amount of setup time. While taking the time to take care of the details is important for getting the perfect image and saving yourself hours of retouching on the back end, sometimes you just want to get a nice clean background without the hours of prep.
As I expected with cotton it came quite wrinkled, but as any cotton the wrinkles come out well. Of course, ironing requires work and on such large piece of fabric it took about 15 minutes. Cotton will wrinkle again if it is folded for storage, so ideally it would be best to store it mounted on the stands, but for me it is not possible due to lack of space. So I expect that I will need to iron it again, but hopefully it will take less time compared to the initial ironing as I packed it less tightly. Steam ironing works best. For a large piece of fabric like this I use a separate bottle to spray mist on ... full review
I am helping a friend’s daughter with her wedding planning and want to make a backdrop like this for the wedding ceremony. Can you elaborate on how the strings of lights were plugged in and whether they all “hung” versus the string light hanging down and then looping back up, if that makes sense? I like the look of them just hanging but it seems like plugging a bunch of individual ones would be hard. Am I making this too complicated?!

The fill light for this shoot is also a Profoto D1 1,000W strobe in a Westcott Apollo Orb, which is camera right and with the light sitting about waist height. This light is also pulled back a bit further than the main to give a wider spill. Since I am using my lights to do two jobs, lighting the subject and the background, I am not gridding and instead placing them so that one edge of the modifier is pointing towards the edge of the seamless and the other is towards the subject.
Features: 1.5-In-1 Design: Fill-in light ring, Bluetooth shutter, Selfie Stick, Phone Holder, Tripod Lamp 2.Wide Application: Widely applied to podcast, live video, video chat, selfie fill light, makeup, filling light indoors, portrait, fashion, wedding art, advertisement photography, etc.3.With Controller: Brightness up and down(10-level brightness), light color switching and power on/off easily handled through the controller 4.3-Light Color: Warm Light, Soft Light, White light. Different light color delivers differetn shooting results. 5.Eye Protection Light Source: Soft light photography light with stepless dimming, can be adjusted to your desired level. 6.Designed to Last: High quality led bead equipepd, flicker-free, no light ra.
SquareTrade Protection Plans are only valid for new or Amazon certified refurbished products purchased at Amazon in the last 30 days. By purchasing this Protection Plan you agree to the Protection Plan Terms & Conditions (http://www.squaretrade.com/terms-standard). Your Protection Plan Terms & Conditions will be delivered via email within 24 hours of purchase
This is my first DIY project. I decided to make this backdrop stand so when I film my YouTube videos. I bought all of the products used from my local Home Depot. I bought three 10 feet long PCV pipes. 4 end caps, 4 T-caps and 2 Elbow Caps. I had a Home Depot Employee cut the PCV pipe for me in store. The 1st PCV was cut in TWO 54 inch long pieces. The 2nd PCV pipe was cut into FOUR 30 inch long pieces. The 3rd PCV pipe was cut into FOUR 12 inch long pieces. I got this idea from Pinterest and I found it very helpful. I spent $10.23 total, including tax, and it took me less than 10 minutes to construct this project. This is great for Vlogging, low-budget photography studios or even a photo-booth at an or birthday party!
A user also mentions that the frame feels slightly flimsy, but he hasn’t had any problems with it. He adds that he is satisfied with its performance so far and that the carrying bag is a nice bonus. However, one customer complains that the product’s measurements are not correct and that it’s not strong enough to hold the vinyl in place without dipping.

The picture posted here is definitely deceiving, but overall I am happy with the product. I don't know how the photographer edited and/or modified the print in the listing to have the "depth" of the floor like that. I have two pictures that I will submit to show what I received - these are UN-EDITED photos (not run through Photoshop, only added my name to the bottom). I ended up using a floor cloth, as you can clearly see in the image. If the photographer used a separate floor cloth to achieve the extended "brick" look, I could understand it, but as the photo stands it is very deceiving. Obviously there were some adjustments made to bring out the colors in the background too. I can easily achieve the same "rich" colors in Photoshop or some other similar photo editing program.
Planning a luau or surf party? Transport your party guests to a tropical paradise with our ocean-themed scene setters. Choose a beach backdrop for a luau prom or a shipwrecked party or pick out a water backdrop or surfboard banner. However you choose to set up your photo booth space, make sure you check out our assortment of photo stick props and other photo booth props to help make your snapshots one of a kind. We have a variety of themes with supporting props, so shop around for movie nights, western parties and even weddings! We also offer personalized backdrops that make it look like you're posing for a mug shot!
×