This Studio portrait umbrella Kit is easy to use and setup. These lights work great with digital cameras. It is ideal for all level photographers. It is a complete kit with a complete background supporting system with case. 3 section cross bar open up to 9ft and 8ft height. THREE 6' x 9' muslin backdrop(black, white and green) and a continuous lighting umbrellas kit.
A. Flash lighting, also called a speedlight, appears suddenly, at a high intensity. Flash lighting can “freeze” the action, allowing for a sharp photo of moving objects. Speedlights can be attached to the camera, or they can be placed on mounts away from the camera. Because the light from the flash appears suddenly, however, you won’t know ahead of time exactly what kinds of shadows the light will create.
The main cause of this working is distance. Notice how close the subject is standing to the background and how far away the main light is from the subject. In this example, the subject is approximately 2 feet from the backdrop and the main light is approximately 4 feet from the subject. If you're new to this, I would recommend starting with your main light a bit further back to make it a little less challenging. You will see why in a second.
This project is simple and doesn’t take very long at all, maybe about an hour from start to finish. After you’re finished, you will want to roll up the fabric and lights for storage until the wedding. Consider covering it as well, to keep and dirt or dust from settling on it. We covered ours with garbage bags since black dog fur and white curtains are not exactly friends.
Look no further! This is an awesome kit. I was very impressed with the weight and quality of the hardware. The poles are thick and sturdy, and it includes a brochure with basic instructions. The set comes with multiple bags: the large primary bag that holds everything, and smaller "set" bags (two for the umbrellas/softboxes and one for the back muslin stand). Overall I am very satisfied with this purchase and highly recommend this set. Also, the seller was great with communication.
Cheryl Woods is an accomplished photographer, designer and branding consultant with a career spanning 20+ years. Her photographic work includes editorial, fashion, portraiture and product photography for major companies in the consumer products field including QVC and Hanover Direct. She received a B.F.A. in Photography from the University of the Arts and an M.F.A. in Media Design from Full Sail University. Cheryl's work has been exhibited at the Lowes Museum of Art in Coral Gables, FL, The New York Independent Film Festival and the Rosenwald Wolf Gallery in Philadelphia, PA. Check out her website here!
A user also mentions that the frame feels slightly flimsy, but he hasn’t had any problems with it. He adds that he is satisfied with its performance so far and that the carrying bag is a nice bonus. However, one customer complains that the product’s measurements are not correct and that it’s not strong enough to hold the vinyl in place without dipping.
The backdrop support system typically mounts backdrops that feature a pole pocket. This pocket simply slides onto the cross bars. Backdrops without a pole pocket can also be mounted to the backdrop support system with spring clamps. Spring clamps (AKA A-Clamps) can be found at any hardware store and typically only cost a few dollars. These clamps are great to have around your studio, as they also allow you to clamp backdrops taut at the bottom to eliminate wrinkles or shadows.
They are plastic, but very strong and the clamping power is quite good. The only annoyance is the little red pads on the end, swivel all the way around so if you are trying to attach something up high with one hand, sometimes they flip backwards and don't grab correctly. You just need to make sure they are facing inwards before you reach up high. I used all 6 clamps to attach a large king size sheet to a linco backdrop stand and it was enough - ... full review
Shooting on a clean white backdrop can be one of the more complex in-studio lighting setups around. Properly exposing for full lengths while giving your models room to work can require four or more extra lights and considerable amount of setup time. While taking the time to take care of the details is important for getting the perfect image and saving yourself hours of retouching on the back end, sometimes you just want to get a nice clean background without the hours of prep.
Made from styrene, a wrinkle-free plastic, this versatile backdrop can be used as a light table, prop setup or a seamless background. Props or people on the other side of the backdrop are seen as shapes and eerie silhouettes. Placed in front of a light, it delivers a frosted glass effect. You can cut Translum with scissors, so you can whittle down a roll into any shape you desire. It’s available in three grades: lightweight, for a soft light effect with a 3/4-stop light loss, medium grade that eliminates most of the shadows and delivers a 1.5-stop light loss and a heavy grade that knocks back two stops of light (this grade is recommended for shooting tables and is cleanable). Medium and lightweight grades are sold in 60-inch x 18-foot rolls while the heavyweight grade is available in 54-inch x 18-foot rolls.
The StudioPRO 3000W's included backdrops add a lot of value and a professional touch that users love. The 10-foot power cord often eliminates the need for an extension, and can reduce anxiety over tripping on a taut line. The lightweight equipment and small case store easily, and if you travel a lot, you would be hard-pressed to find a more portable model.
The latest addition to our lineup, these are serious solutions for serious exhibitors who need much more powerful and attention-grabbing setups than backdrops or backgrounds: a single system and they will create the perfect walk-in booth for your expo or promotional event. They assemble swiftly, they're lightweight, durable, highly portable, and you can add vivid custom graphics.
Like other photo backdrop materials, polyester also comes in various sizes and colors. An advantage of this fabric is that it’s wrinkle-free. If there are heavy wrinkles, it can easily be removed by warm ironing from the back or by steam ironing it when it’s hung. It also includes rod holes that are perfect for hanging, especially if you don’t have a place to store it after using.