A. Regardless of the lighting system you’ve selected, you should have at least some control over the light intensity. A basic lighting system should allow you to adjust the power of the lighting to half or full. More complex systems will give you several settings options to control the intensity of the lighting. If you purchase an inexpensive lighting system, you’ll have to spend more time adjusting the physical position of the light to achieve the exact intensity of light on the subject you want.
A traditional backdrop support system is the most common mounting solution for photography studios. The backdrop support system consists of a 3-section cross bar and two light stands. By utilizing two of the included cross bars, the backdrop support system can mount backdrops up to 7-feet wide. By utilizing all three cross bars, this system can mount backdrops up to 10.5-feet wide. The included stands can extend up to 12-feet high for photographing tall people, high movement, or products.
A 5 or 6-foot wide backdrop is a great size for headshots and ¾-length portraits. These backdrops are easy to manage and still only requires minimal space to set up. These backgrounds are ideal for event photographers who often work in busy spaces or for photographers working in a small home studio. While 5 to 6-foot backdrops offer more flexibility than 3.5-foot backdrops, they still become a bit tight if when photographing a couple or full-length portrait.
Stands often come with crossbars that can support a cloth, vinyl, muslin, or paper backdrop and are secured by either slipping it through a pole pocket or by clamps. For many stands, a crossbar is not needed if the backdrop is canvas or vinyl and has a wooden mounting. Single portable backdrop stands are also available. Portable photography stands are easy to set up, break down, and transport to locations.
Users love the price and the quality of the product, but some do note that it’s too light for their liking. The Linco T-shaped backdrop stand features a sturdy design, a set of crossbars, and clamps to keep the fabric in place. Another great thing about this product is that it’s light – just four lbs., and you don’t need any special skills to assemble it. What’s more, you can adjust it from 2.6 ft. to 6.7 ft.
Easy to use and looks good in portraits. I used a stand by Fancierstudio and clips by LimoStudio and got this backdrop set up nicely. It's plenty long, and looks like you could cut it up and use it to cover a larger area, however I wish it were wider. It's just barely wide enough for a good portrait, but not any wider. It looks good if you put your subject a foot or so in front of it with a large aperture and get some bokeh on it.
The picture posted here is definitely deceiving, but overall I am happy with the product. I don't know how the photographer edited and/or modified the print in the listing to have the "depth" of the floor like that. I have two pictures that I will submit to show what I received - these are UN-EDITED photos (not run through Photoshop, only added my name to the bottom). I ended up using a floor cloth, as you can clearly see in the image. If the photographer used a separate floor cloth to achieve the extended "brick" look, I could understand it, but as the photo stands it is very deceiving. Obviously there were some adjustments made to bring out the colors in the background too. I can easily achieve the same "rich" colors in Photoshop or some other similar photo editing program.
For our session I tried to keep Mr. C about 3/4 of the way up from the lights on the wall and towards me (right around where you are seeing the garland and red ornaments in the above photo). I was sitting only as far back from him as I had to, to get what I wanted of him in the frame (keeping in mind the three criteria above). Using the garland and ornaments for props helped because he just played with them wherever I set them down.
Position these lights to point at the backdrop and use manual settings to achieve the “blown out highlights” effect. Make sure the light reading is at least 3 stops higher than the light on your subject. Light bounced off the blown-out background will also create a back-lighting effect on your subject, the degree of back-lighting depends on the angle at which background light are pointed at the background.
It was higher quality then I had expected . One side is a very soft and silky/shiny material. The photo is only on one side , just to let you know . Needs to be ironed but ours broke and we do not have an iron at the moment. If the lines were out it would look absolutely gorgeous. Totally changed the feel of a room. Bought the 60”W by 80”L . Not disappointed.
Anyone that does any kind of handy work around the house (or anywhere for that matter) definitely needs to keep a few of these on hand. They are simple. They are plastic, but they feel very strong. The spring inside is REALLY strong! It's got a tight grip for sure! I have around 40-50 of these (different brands) that I've acquired over the years doing woodworking projects. These rank right up there with the best ones! If you're gluing something, these are a must to clamp the parts together. Great grip and as inexpensive as you're going to find! (currently $9.99/1.67ea). Hard to argue with that!
Want to tweak one of our images? Have your own custom image you'd like to print? The possibilities are endless and our customer service department is ready to help. We print using forced perspective to help give you the most realistic image possible so that your portraits will look realistic as if you were actually on location. If you have an image that you own or have rights to, we'll help you get it formatted correctly for our printing process. Email us your artwork to start the process. If you're wanting a custom Hollywood style photo backdrop with your logo(s) repeated all over it, we do that too with one of our step and repeat backdrops!